Application Suitable for 2-Door vehicles with Manual Windows, SUVs & cars Not for trucks For 2 doors with 3 light switches, 1 single frame, 1 double frame & wiring Specific Operating mode: electric
Material: brass, plastic Type: Window Conversion Kit, Window Lift Kit, Power Window Kit, Power Window Switch Kit Number of pieces: 2 Mounting Type: Performance/ Custom Mounting Hardware Included: Yes Surface Finish: Black Placement on Vehicle: Front, Rear, Left, Right Operating Voltage: 12V DC +/- 2 V Characteristics Electric window lift kit for 2 doors Perfect suit for front or rear windows Low energy consumption Low noise engine operation With thermal overload protection Handle to roll up the windows in compatible for case of power failure Converts your crank window to a power window Easy installation The package
Includes:2 electric window motors Wiring Switches Hardware Note* Warranty: one year* Condition: 100% Brand New* Package
Includes:: as the picture shows* Professional installation is highly recommended (no instr...


...

Application The nylon straps are adjustable from 38inches to 50inches in length to accommodate most any engine & induction package. Feature Steel engine lift bracket features multiple mounting holes for perfect strap placement 2 Nylon lifting straps feature adjustable length & steel end plates 1, 200 pound lifting capacity will lift just about any engine combination Strap ends feature 3/8-inch mounting holes to attach via exhaust studs/bolts Mounts to ends of block or cylinder heads for four-point stabilization Provides clearance over large induction systems/air filter assemblies Easily lifts complete engine with induction system in place, making engine swaps faster Powder coated lift bracket & strap ends for long life & low maintenance ...

Application Suits all Japan car (the filter thread size is 3/4*16 or m 20*1.5) Specific Made with High Quality T-6061 Aluminum 10-AN Male Fitting & 0.875” x 12.125” Bolt Pattern Inlet / Outlet

Size: AN-10 / M20XP1.5 Female Fitting+ 3/4-16 Female Fitting Core

Size: 11.4*4.5*2 inch（29cm*11.5cm *5cm） Center Adapter: M20 x 1.5 3/4 x 16 UNF Thread Supports Oil Filters That Has M20 Thread M20 Block Fitting Oil Line Lengths: 1.4M + 1.6M Bolt Pattern: 0.875” x 12.125” Package Include 1x 3/4-16 Female Fitting 1x M20XP 1.5 Female Fitting 1x Oil Filter Adapter 1x Aluminum Oil Cooler 1x 10-AN Hose Line Separator 2x 10-AN 0 Degree Swivel Aluminum Hose End 2x 10-AN 90 Degree Swivel Aluminum Hose End 2x Braided Nylon Hose (56" *1 + 62" *1 ) Warranty: one year warranty for any manufacturing defect



...

Application Suits all Japan car (the filter thread size is 3/4*16 or m 20*1.5) Specific Made with High Quality T-6061 Aluminum 10-AN Male Fitting & 0.875” x 12.125” Bolt Pattern Inlet / Outlet

Size: AN-10 / M20XP1.5 Female Fitting+ 3/4-16 Female Fitting Core

Size: 11.4*4.5*2 inch（29cm*11.5cm *5cm） Center Adapter: M20 x 1.5 3/4 x 16 UNF Thread Supports Oil Filters That Has M20 Thread M20 Block Fitting Oil Line Lengths: 1.4M + 1.6M Bolt Pattern: 0.875” x 12.125” Package Include 1x 3/4-16 Female Fitting 1x M20XP 1.5 Female Fitting 1x Oil Filter Adapter 1x Aluminum Oil Cooler 1x 10-AN Hose Line Separator 2x 10-AN 0 Degree Swivel Aluminum Hose End 2x 10-AN 90 Degree Swivel Aluminum Hose End 2x Braided Nylon Hose (56" *1 + 62" *1 ) Warranty: one year warranty for any manufacturing defect



...

Application Universal for Turbo Manifold with T3 Flange. Perfect for all 2.0L-3.0L engines. * Notice:DO NOT for 3 INCH VB&. The vband size of this turbo is 2.5 inch. Please confirm the size before purchasing. Specification Compressor
Size: * Trim: 57 * Inducer Diameter: 56.6 mm * Exducer Diameter: 75 mm * A/R: 0.82 Turbine
Size: * Exhaust Inlet Flange: T3 Twin Scroll Flange * Exhaust Outlet Flange: 2.5'' V Band Flange * Turbine exhaust outlet: 79.8 mm (OD) / 63 mm（ID） * Trim: 61.6 * Inducer Diameter: 74.4 mm * Exducer Diameter: 58.4 mm * A/R: 0.7 Oil Inlet: M12*1.25 2*M8*1.25 Oil Outlet: 2*M8*1.25 Cooling Type: Oil Cooled Horse Power:up to 500HP Bearing Type: Floating Bearing Thrust bearing: 270 Degrees Turbo Type: Twin-Scroll Condition: New Accessories: You will get exactly as shown in the picture above Package

Size: 25*24*23cm Package Weight: 9560g Package included 1x Turbocharger 1x Flange gaskets 2x Oil port gaskets 1x Bolts Feature* Product Material 1. Turbine housing ： Ductile iron QT45...



...

Specification Fitment: Universal Placement on vehicle: Front Voltage:12-24V DC Electric Systems Handle Pressure: Up to 3000 psi

...

Applicationfor most cars & trucks & fuel injection systems Specifications Scale:0-140 PSI /0-10 bar scale Package Include: Versatile Fuel Pressure Gauge Adapters, Hoses & Fittings Carry compatible for Case Notice Please feel free to contact us for whatever we can help. Box
Colour: The color of the box is random Warranty: one year warranty for any manufacturing defect
...

Applicationfor most cars & trucks & fuel injection systems Specifications Scale:0-140 PSI /0-10 bar scale Package Include: Versatile Fuel Pressure Gauge Adapters, Hoses & Fittings Carry compatible for Case Notice Please feel free to contact us for whatever we can help. Box
Colour: The color of the box is random Warranty: one year warranty for any manufacturing defect
...

Specification Condition： New Quntity： As picture shown Warranty：one year warranty for any manufacturing defect Packing： * 1 x GSL392 external fuel pump with 400-939 install kit * 2 x Walbro 3/8 hose barb fuel fitting * 2 x crush washers * 2 x electrical connections. * 2 x starlock washers * 2 x nuts * 2 x mounting clamps * 1 x mounting cushion Placement on Vehicle： Rear Design: Inline/ External (Mounts Outside of Tank)、 Operating Pressure: 15-120 PSI (final fuel pressure set by regulator) Flow: 255LPH at 43PSI & 12V Fuel Pump Type： Electrical Minimum Voltage: 12V Part Number: GSL392 400-939 0580254044 A1000 QFS-606FT 、 GCL611-2 400-929 400-920 128-920 128-929 Feature： It is designed to be run in a Return Style Fuel System It works well between 25 psi & 70 psi. It can supply enough fuel for 600hp normally aspirated or 500hp in supercharged applications. Noteplease make sure it will fit your machine before purchasing it. Please check pictures for more details. If this item can n... ...

Application Universal engine & vehicle Specification Condition: Brand New Core Dimension: 600 X 300 X 76 MM Inlet / outlet

...