Introduction A turbocharger (also called turbo), is a turbine-driven forced induction device that increases an internal combustion engine’s efficiency & power output by forcing extra air into the combustion chamber. The key difference between a turbocharger & a conventional supercharger is precisely that a turbocharger is powered by a turbine driven by the engine's exhaust gas. A turbo consists of a compressor, a cartridge, a turbine & an exhaust valve. Maxpeedingrods provides universal turbochargers to enhance overall engine performance of your beloved car. Application Universal Turbo Kit Perfect For 1.5L-3.0L engine This Kit Will be able to add 350+HP at 7.5-14.5 PSI. (You will need Turbo Manifold, Modification & other accessories to complete the Turbo Kit Project)* Notice: Please confirm that your vehicle displacement is 1.5L-3L before purchasing. Otherwise, if you buy the wrong one, you will not be able to use it normally. Specification Turbine Side: Exhaust Inlet Flange: T3 T4 4 bolt Flange Patterns Exhaust Outlet pipe Flange: 5 bolt Flange Turbine Trim: 74.2 Turbine Inducer Diameter:64.8 mm Turbine Exducer Diameter: 55.8mm Turbine A/R: 0.63 Compressor Side: Compressor Trim: 48.1 Compressor Inducer Diameter: 52.7mm Compressor Exducer Diameter: 76 mm Compressor A/R: 0.5 Compressor Inlet Diameter: 72mm (2.8") Compressor Outlet Diameter:53mm（2"） Oil Inlet: M12*1.25 Oil Outlet:2*M8*1.25 Bearing Type: Wet Float Bearing Cooling Type: Oil Cooling Thrust Bearing:270 degree Horsepower: Up to 400HPOil Inlet: 1/8 NPTTurbo Type: Individual Condition: 100% Brand New Accessories: You will get exactly as shown as picture above Other

Specification in the kit :*1 x Intercooler: Size 27'' x 7'' x 2.5'' inch. Inlet size is 2.5 inch. Support up to 350 hp for this small intercooler size
- tube & fin style. Intercooler core
Size:21*7*2.5 *1 x Universal turbo intercooler piping kit including:2 x Straight Aluminum Pipe 2 x 45° Aluminum Pipe 2 x 75° Aluminum Pipe 2 x 90° Aluminum Pipe 6 x 2.5" Straight Silicon Hose (Blue)2 x 2.5" 90 Degree Hose (Blue)16 x 2.5" Stainless Steel T-Clamp*1 x Type-S Blow Off Valve: 2.5" Inch Type S/ Rs Flange Pipe.25 P Si Boost! *1 x BOV pipe: can install anywhere suitable*1 x 35/38MM Wastegate: 35/38mm External Waste Gate Kit*1 x Turbo Boost Gauge: 2" (52mm) Turbo Boost Meter Gauge.*1 x Turbo Boost Controller: *1 x Turbo Oil Return / Feeding Line Kit: Turbo Oil Feed + Return Drain Line Kit Combo.*1x 5 Bolt pipe: 2.5" t 3/t 4 5-bolt stainless steel TIG welded pipe. pipe length: 13“ Package
Size:94x 46 x 45 cm Package Weight: 24600g Universal Fitment: Yes Finish: Matte Features 1. Turbo charger:* Turbine housing ： Ductile iron QT450-10
- temperature resistant up to 700℃* Steel turbine wheel：K418 alloy -highoxidation stability & resistanceupto 900℃* Compressor housing：ZL104 aluminum with lightweight * Compressor wheel/blades： Cast aluminium blades – superior air tightness & corrosion resistance* Product Performance Cost-effective turbo increase 20-40% power for your car Rich experience in turbo production & own factory High-Speed oil seal ring & Precision clearance Built for durability & strength* Technology Advantage: 100% balancing Test by TURBOTECHNICSVSR3G3-min-Flow VNT Turbo testing Advanced Actuator Tester/ Programmer 2. Intercooler * core
Size:21*7*2.5 cools down the turbocharged air efficiently * Lightweight aluminum racing intercooler， * Strong TIG welds will support high PSI levels 3. Boost controller * Can be setup to adjust boost PSI on the fly * Can be adjusted for any PSI level desired * Control your boost with a precise click *

Includes:: complete install kit * Anodized aluminum finish * CNC machined design 4. Intercooler piping kit * made from 6061 aluminum* Lightweight yet strong aluminum piping * High pressure silicone couplersand T-bolt clamps 5. Turbo Oil returen / Feeding line kit* Stainless Steel Braided *

Includes:: complete install kit * It helps circulate oil from the turbo charger to the oil pan.* The kit provides a anodized look * gives a best cooling performance on your turbo & long lasting life.6. Blow Off Valve Kit* CNC Billet Aluminum Type RS Style Blow off Valve* Easy Mount Piping Set Included For Bolt-On. * Including all necessary hardwares.* easily adjustable to prevent both permature boost leakage & compressor surge.* Fast response One For Low & High Boost Pressure.* Performance design produces a powerful & aggressive sound * Quality design will not leak under high boost conditions * Flanges can be installed at user discretion * the color will be shipped randomly (black/blue)7. 38MM Wastegate * Most reliable wastegates For competition vehicles. * accurate boost control* high quality appearance features Dual port design * comes with waste gate spring (fully adjustable, up to 15 psi), allow you to add the spring to get desired high psi.8. 5 Blot Turbo pipe * CNC machined surface * Fits all of our turbo kits that feature a turbocharger with a 5-bolt exhaust housing. 9. BOV pipe/ Adapter * can install anywhere suitable 10. Tu










...

Introduction A turbocompatible for charger (also called turbo), is a turbine-driven forced induction device that increases an internal combustion engine’s efficiency & power output by forcing extra air into the combustion chamber. The key difference between a turbocompatible for charger & a conventional supercompatible for charger is precisely that a turbocompatible for charger is powered by a turbine driven by the engine's exhaust gas. A turbo consists of a compressor, a cartridge, a turbine & an exhaust valve. Maxpeedingrods provides universal turbocompatible for chargers to enhance overall engine performance of your beloved car. Application Universal Turbo Kit Perfect For 1.5L-3.0L engine This Kit Will be able to add 350+HP at 7.5-14.5 PSI. (You will need Turbo Manifold, Modification & other accessories to complete the Turbo Kit Project)* Notice: Please confirm that your vehicle displacement is 1.5L-3L before purchasing. Otherwise, if you buy the wrong one, you will not be able to... ...

Introduction Are you trying to put together a cost effective turbocharger system for your vehicle? You should know a turbocharged car has about 20-40% more total power than a non-turbo car of the same year, make & model. Well, Maxpeedingrodsentry level universal turbo got just what you're looking for. Maxpeedingrods aftermarket replacement turbo provide the perfect solution by delivering a high-quality turbo at a budget-friendly price. Application Perfect for all 4 or 6 CYL, 1.5-2.5L engines（ If it exceeds this range, it will cause damage to the turbo） Horse Power: Capable of Boosting Horse Power up to 420HPBearing: Journal Bearing Maximum PSI 18（1.2 Bar） Specification Exhaust Inlet (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns Exhaust Outlet (Downpipe) Flange: V-Band Flange Bearing: Journal Bearing Cooling Type: Oil Cooled Wastegate: Internal Wastegate Compressor： Trim: 48.1A/R: 0.5 Inducer: 52.7 Exducer: 76 Turbine: Trim: 74.2A/R: 0.63 Inducer: 64.8 Exducer: 55.8 Oil Inlet: M12*1.25 & 2*M8*... ...

Introduction Are you trying to put together a cost effective turbocharger system for your vehicle? You should know a turbocharged car has about 20-40% more total power than a non-turbo car of the same year, make & model. Well, Maxpeedingrodsentry level universal turbo got just what you're looking for. Maxpeedingrods aftermarket replacement turbo provide the perfect solution by delivering a high-quality turbo at a budget-friendly price. Application Perfect for all 4 or 6 CYL, 1.5-2.5L engines（ If it exceeds this range, it will cause damage to the turbo） Horse Power: Capable of Boosting Horse Power up to 420HPBearing: Journal Bearing Maximum PSI 18（1.2 Bar） Specification Exhaust Inlet (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns Exhaust Outlet (Downpipe) Flange: V-Band Flange Bearing: Journal Bearing Cooling Type: Oil Cooled Wastegate: Internal Wastegate Compressor： Trim: 48.1A/R: 0.5 Inducer: 52.7 Exducer: 76 Turbine: Trim: 74.2A/R: 0.63 Inducer: 64.8 Exducer: 55.8 Oil Inlet: M12*1.25 & 2*M8*1.25 Oil Outlet: 2*M8*1.25 Turbine exhaust outlet: 79mm Turbine exhaust inlet：44.7mm/85.8mm Compressor outlet：78 mm Compressor inlet：51.5 mm Features-100% BALANCING TEST， This Turbocharger you will receive has been balanced using the VSR machine technology.
- Turbine housing： Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius.- Steel Turbine Wheel： Made from the special K418 alloy to achieve high oxidation resistance & stability under high temperatures up to 900 degrees Celsius.- Compressor housing：ZL104 aluminum.- Compressor wheel/blades: Cast Aluminium with good gas tightness & corrosion resistance. -High Quality Material.-Boost Engine Horsepower Significantly.-Increase Engine Power & Torque Outpout.-Maintain Combustion Chamber Pressure & Fuel/ Air Load.-Built for Durability & Strength.-Warranty: one year warranty for any manufacturing defect. Notice* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.* Make sure the oil drain line is lower than the turbo itself.* Gasoline car must install a water cooling device to avoid overheating.* Ensure exhaust outlet are well sealed by welding.* Please check the specifications carefully before bidding. If you are not sure about these information, please feel free to contact us.* This is universal application turbo, so modification might be required for some vehicles.* Professional installation is highly recommended.* Additional parts will be needed for a complete installation. Please consult professional turbo installer for details.
...

Application： Compatible for BMW E36 325i / 325is i 6 1991-1995 Compatible for BMW E36 328i / 328is i 6 1994-1999 Compatible for BMW E36 323i i 6 1995-1999 Compatible for BMW E36 M3 i 6 1992-1999 Compatible for BMW E46 323i / 323is / 323 Ci / 323 Ti i 6 1997-2000 Compatible for BMW E46 328i / 328 Ci i 6 1998-2000 Compatible for BMW E46 325i / 325 Ci / 325 Xi / 325 Ti i 6 2001-2007 Compatible for BMW E46 330i / 330 Ci / 330 Xi i 6 2000-2007 Note: This is universal application turbo, so modification might be required for some vehicles. Product Specific： 1 x T3/T4 Turbocharger: for 1.5L to 2.5L any 4/6 cylinder engine Horse Power: 400 HP Compressor Inlet Diameter: 72mm (2.8") Compressor Outlet Diameter: 53mm (2") Oil Inlet: 1/8 NPT Exhaust Inlet (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns Exhaust Outlet (Turbo Pipe) Flange: 5 bolt Flange Turbine Trim: 74.2 Turbine Inducer Diameter: 64.8 mm Turbine Exducer Diameter: 55.8mm Turbine A/R: 0.63 Compressor Trim: 48.1 Compressor Inducer Diamete... ...

Fit for: Perfect for 1.5L to 2.5L any 4/6 cylinder engine Perfect for 3.2L-5.0L engines in twin turbo application, capable to 800HP Boost pressures are 7psi (.5 Bar) to 21psi (1.5 Bar) Exhaust (Turbo Manifold) Flange:T3 T4 4 bolt Flange Patterns Exhaust Flange: Standard T3 5 bolt flange pattern Cooling Type: Oil Cooling Bearing Type: Journal Bearing/ Floating Bearing Thrust Bearing: 270 degrees Horse Power: Up to 400 HP Wastegate: W/O Wastegate Actuator Type: W/O Actuator Oil Inlet: M12*1.25 Oil Outlet: 2*M8*1.25 Turbo Type: Individual Universal Fitment: Yes Finish: Matte Condition: 100% Brand New Accessories: You will get exactly as shown as picture above Package

Size: 27x 25x 24 cm Package Weight: 7250g Compressor: Trim: 44 A/R. 5 Inducer: 50.5 Exducer: 76 Turbine: Trim: 73 A/R. 63 Inducer: 65.5 Exducer: 55.9 * OIL RETURN LINE: Length: 550mm Inner Diameter: 21mm ​* OIL FEED LINE: Length: 1000mm Inner Diameter: 14mm Notice * Does NOT have a internal wastega...

...

Applicationfor 2.5L & up enginesfor 3.2L-5.0L engines, capable to 800HPNote: Please confirm that your car's displacement is between 1.5-2.5L. Please check the size before purchasing & make sure that your car has enough space to install this turbo. Specification Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns Exhaust (Downpipe) Flange: Standard T3 5 bolt downpipe flange pattern Cooling Type: Oil Cooled Maximum 18PSIWastegate: External Wastegate Horse Power: Boost Horse Power up to 300+HP Compressor: Trim: 55 Inducer Diameter: 50.5 mm Exducer Diameter: 76 mm A/R: 0.5 Turbine Trim: 73 Inducer Diameter: 65.5 mm Exducer Diameter: 55.9 mm A/R: 0.63 Oil Inlet: M12*1.25 Oil Outlet:2*M8*1.25 Blow Off Valve: Billet Aluminum Body 8 Discharge Ports That Draw In Surrounding Air & Release a Unique Discharge Sound 40mm, Hard-Anodized Valve for Increased Airflow Dual Spring System Promoted Response & Allows for High Boost Pressures Holds Up to 30 PSI Boost Pressure Aggressive for JDM Racing Dischar... ...

Application Compatible for 1.5L to 2.5L any 4/6 cylinder engine Maximum PSI 18（1.2 Bar） Specification Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns Exhaust (Downpipe) Flange: V-Band Flange Cooling Type: Oil Cooled Wastegate: Internal Wastegate Horse Power: Boost Horse Power up to 420HPCompressor: Trim:44 Inducer Diameter:50.5 mm Exducer Diameter:76 mm A/R:0.5 Turbine: Trim:73 Inducer Diameter:65.5 mm Exducer Diameter:55.9 mm A/R:0.63 Oil Inlet: M12*1.25 2*M8*1.25 Oil Outlet: 2*M8*1.25 Package
Includes::1x T3/T4 T04E V-band Turbocharger 1x Type-RS Blow Off Valve Kit 1x Type-RS 2.5" Aluminum Flange Pipe Adapter (You will get exactly as shown in the picture above) Condition: New Bearing Type: Floating Bearing Warranty: one year Accessories: You will get exactly as shown in the picture above About Blow Off Valve Blow Off Valve: Holds Up to 30PSI Boost Pressure Easy Assembly, Aluminum Flange, CNC Machined Billet Aluminum Body Dual Spring System Promoted Response Allows for High Boost Pressures Hard-Anodized Valve for Increased Air Flow Powder-Coated Anodized & Polished Finish 2 Bolts Mounting Design Flange Pipe Adapter:2.50" (63mm) Pipe Size Fits Type-S or Type-RS Dump Pipe Flange Oval / 2 Bolt Flange Design type Condition: New Warranty: one year warranty for any manufacturing defect Notice* Professional installation is highly recommended (No Instruction Included).* For any needs please contact us.* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.* Make sure the oil drain line is lower than the turbo itself.* Gasoline car must install a water cooling device to avoid overheating.* Ensure exhaust outlet are well sealed by welding.
...

Application： Compatible for BMW E36 325i / 325is i 6 1991-1995 Compatible for BMW E36 328i / 328is i 6 1994-1999 Compatible for BMW E36 323i i 6 1995-1999 Compatible for BMW E36 M3 i 6 1992-1999 Compatible for BMW E46 323i / 323is / 323 Ci / 323 Ti i 6 1997-2000 Compatible for BMW E46 328i / 328 Ci i 6 1998-2000 Compatible for BMW E46 325i / 325 Ci / 325 Xi / 325 Ti i 6 2001-2007 Compatible for BMW E46 330i / 330 Ci / 330 Xi i 6 2000-2007 Note: This is universal application turbo, so modification might be required for some vehicles.   Product Specific： 1 x T3/T4 Turbo Charger: Compressor Inlet Diameter: 72mm (2.8") Compressor Outlet Diameter:  53mm（2"） Oil Inlet: 1/8 NPT Exhaust Inlet (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns Exhaust Outlet (Turbo Pipe) Flange: 5 bolt Flange Turbine Trim: 74.2 Turbine Inducer Diameter:  64.8 mm Turbine Exducer Diameter: 55.8mm Turbine A/R: 0.63 Compressor Trim: 48.1 Compressor Inducer Diameter: 52.7mm Compressor Exducer Diameter: 76 mm Compressor A/R: 0.5 Bearing: Wet Float Bearing Turbocharger Overall

Size: 270*220*220 1 x Intercooler: * Size 27'' x 7'' x 2.5'' inch. Inlet size is 2.5 inch. * Support up to 350 hp for this small intercooler size
- tube & fin style. * Intercooler core
Size:  21*7*2.5 1 x Universal turbo intercooler piping kit:   Straight Aluminum Pipe *2 45° Aluminum Pipe * 2 75° Aluminum Pipe * 2 90° Aluminum Pipe * 2 2.5" Straight Silicon Hose (Blue) * 6 2.5" 90 Degree Hose (Blue) * 2 2.5" Stainless Steel T-Clamp * 16 1 x Type-S Blow Off Valve: CNC Billet Aluminum Type RS Style Blow off Valve & 2.5" Inch Type S/ Rs Flange Pipe.   25 P Si Boost! Can hold up to 1000+ HP. 1 x BOV pipe: can be installed anywhere suitable 1 x  35/38MM Wastegate: 35/38mm External Waste Gate Kit 1 x Turbo Boost Controller: Up To 30 PSi Boost 1 x Turbo Oil Return / Feeding Line Kit: Turbo Oil Feed + Return Drain Line Kit Combo. It helps circulate oil from the turbo charger to the oil pan. The kit provides a anodized look, & gives a best cooling performance on your turbo & long lasting life.
Material: Stainless Steel Braided 1 x 5 Blot Turbo Pipe: 2.5" t 3/t 4 5-bolt stainless steel TIG welded turbo pipe. Pipe length: 13" Fits all of our turbo kits that feature a turbocharger with a 5-bolt exhaust housing. This provides a simple starter solution for connecting your turbo's exhaust to your existing exhaust system. 1 x INTAKE FILTER:
Width: 6" Inlet: 3.0" Overall Tall: 3.5" Mesh Tall: 2.5"   Condition:   New Warranty：one year Accessories: You will get exactly as shown in the picture above   Package included: 1x T3/T4 Turbocharger 1x Oil Feed / Return Line 1x 35/38mm Wastegate 1x 5 Bolt Turbo Pipe 1x Turbo Intercooler 1x Tubo Boost Controller 1x Type-S Blow Off Valve (Random Color) 1x BOV Adapter/pipe 1x Turbo Piping Kit 1x Air filter   Note: * Need modifications
- Professionals ONLY (This is an aftermarket universal turbo kit for DIY purpose, & it's recommended to advanced players but not for beginners. )  * we will not be responsible for man-made installation damage.  






...

Application For Turbo Blanket:T4 for GT40 GT42 GT45 Turbocharger Heat Shield Blanket Specification Package Included: 1X Heat shield blanket 2X Locking Springs 1X Fiberglass Heat Wrap Tape 10X Stainless Steel Zip Ties Condition: New Accessories: You will get exactly as shown in the picture above Notice* Please confirm your old part number matches up with one of the part numbers above * Professional installation is highly recommended (No Instruction Included) * For any needs please contact us. ...