Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Lexus series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Lexus IS 250 / IS350 RWD 2nd Gen. 2006-2012 Compatible for Lexus GS350 RWD 2007-2011 Compatible for Lexus GS430 RWD 2007-2011 RWD Only, not fit for AWDSpecification Ma Xpeedingrods Coilover kit is simply great for daily driver.1. Product included: Complete coilovers 2 front & 2 rear, a pair wrench for height adjustment. 2. Adjustable Camber Plate: NO.3. Adjustable Damper: 24 ways Adjustable Damper.4. Spring rate: Front: 12 kg/mm (...
...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Lexus series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Lexus IS 250 / IS350 RWD 2nd Gen. 2006-2012 Compatible for Lexus GS350 RWD 2007-2011 Compatible for Lexus GS430 RWD 2007-2011 RWD Only, not fit for AWDSpecification Ma Xpeedingrods Coilover kit is simply great for daily driver.1. Product included: Complete coilovers 2 front & 2 rear, a pair wrench for height adjustment. 2. Adjustable Camber Plate: NO.3. Adjustable Damper: 24 ways Adjustable Damper.4. Spring rate: Front: 12 kg/mm (...
...

Application Compatible for Honda Accord VIII LX, SE, LX-P sedan CP2 2008-2012 Compatible for Honda Accord VIII LX, SE, LX-P sedan CP3 2008-2012 Compatible for Honda Accord VIII LX, SE, LX-P coupe CS1 (north American only) 2008-2012 Compatible for Honda Accord VIII LX, SE, LX-P CS2 (north American only) 2008-2012 Compatible for Honda Accord VIII LX, SE, LX-P sedan CU1 CU2 CU3 2008-2015 Compatible for Honda Accord VIII Tourer 5-door wagon CW1 2008-2015 Compatible for Acura TSX (North America) 2009-2015 Compatible for Accord Euro （ Australia & New Zealand）2008.6-2015.7 Specification Product included: Complete coilovers 2 front & 2 rear as shown in the picture Dampening: 24 levels rebound dampening adjustable Adjustable

Height: YESAdjustable Camber Plate: NOFront & Rear upper Mounts: Rubber Front Spring Rate: 10 kg/mm (560 in/lbs) Rear Spring Rate: 7 kg/mm (392 in/lbs) Spring Preload: 7-10 mm Drop Height Front: 1-3in Drop Height Rear: 1-3in Shock type： Twin tube Color： Red Warranty: one year Feature- Able to lower ride height by 1''-3''; allows user to have a more aggressive stance.- Coilovers are 24-way adjustable. Rebound & Dampening adjustment which allows the user the ability to dial in your coilovers to any driving needs. The user can enjoy a comfortable riding experience in all road conditions.- Twin-Tube Shock design is used for low internal frictional resistance in order to increase efficiency & keep shock temps low.- Height adjustment does not sacrifice damper stroke length.- These coilovers are able to have their height adjusted without being taken out of the car.- Most components of the suspension parts are made from 6061-T6 aluminum to increase strength & rigidity.- High Tensile strength performance spring---Tested under a 600, 000 time continuous compression test, the spring distortion was less than 0.04%. Plus, the special surface treatment improves the durability & performance.- Adjustment tools included in the kit. Notice- Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.

...

Application Compatible for Honda Accord VIII LX, SE, LX-P sedan CP2 2008-2012 Compatible for Honda Accord VIII LX, SE, LX-P sedan CP3 2008-2012 Compatible for Honda Accord VIII LX, SE, LX-P coupe CS1 (north American only) 2008-2012 Compatible for Honda Accord VIII LX, SE, LX-P CS2 (north American only) 2008-2012 Compatible for Honda Accord VIII LX, SE, LX-P sedan CU1 CU2 CU3 2008-2015 Compatible for Honda Accord VIII Tourer 5-door wagon CW1 2008-2015 Compatible for Acura TSX (North America) 2009-2015 Compatible for Accord Euro （ Australia & New Zealand）2008.6-2015.7 Specification Product included: Complete coilovers 2 front & 2 rear as shown in the picture Dampening: 24 levels rebound dampening adjustable Adjustable

Height: YESAdjustable Camber Plate: NOFront & Rear upper Mounts: Rubber Front Spring Rate: 10 kg/mm (560 in/lbs) Rear Spring Rate: 7 kg/mm (392 in/lbs) Spring Preload: 7-10 mm Drop Height Front: 1-3in Drop Height Rear: 1-3in Shock type： Twin tube Color： Red Warranty: one year Feature- Able to lower...

...

Application Compatible for Honda Accord VIII LX, SE, LX-P sedan CP2 2008-2012 Compatible for Honda Accord VIII LX, SE, LX-P sedan CP3 2008-2012 Compatible for Honda Accord VIII LX, SE, LX-P coupe CS1 (north American only) 2008-2012 Compatible for Honda Accord VIII LX, SE, LX-P CS2 (north American only) 2008-2012 Compatible for Honda Accord VIII LX, SE, LX-P sedan CU1 CU2 CU3 2008-2015 Compatible for Honda Accord VIII Tourer 5-door wagon CW1 2008-2015 Compatible for Acura TSX (North America) 2009-2015 Compatible for Accord Euro （ Australia & New Zealand）2008.6-2015.7 Specification Product included: Complete coilovers 2 front & 2 rear as shown in the picture Dampening: 24 levels rebound dampening adjustable Adjustable

Height: YESAdjustable Camber Plate: NOFront & Rear upper Mounts: Rubber Front Spring Rate: 10 kg/mm (560 in/lbs) Rear Spring Rate: 7 kg/mm (392 in/lbs) Spring Preload: 7-10 mm Drop Height Front: 1-3in Drop Height Rear: 1-3in Shock type： Twin tube Color： Red Warranty: one year Feature- Able to lower ride height by 1''-3''; allows user to have a more aggressive stance.- Coilovers are 24-way adjustable. Rebound & Dampening adjustment which allows the user the ability to dial in your coilovers to any driving needs. The user can enjoy a comfortable riding experience in all road conditions.- Twin-Tube Shock design is used for low internal frictional resistance in order to increase efficiency & keep shock temps low.- Height adjustment does not sacrifice damper stroke length.- These coilovers are able to have their height adjusted without being taken out of the car.- Most components of the suspension parts are made from 6061-T6 aluminum to increase strength & rigidity.- High Tensile strength performance spring---Tested under a 600, 000 time continuous compression test, the spring distortion was less than 0.04%. Plus, the special surface treatment improves the durability & performance.- Adjustment tools included in the kit. Notice- Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.

...

Introduction MXR-SLC based on MXR-SNA coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for Honda Accord DX/EX/LX CD5 CD7 1994-1997 Compatible for Honda Acura CL YA1 1997-1999 Specification Front & Rear top mount: rubber Damping: 24 levels rebound damping adjustable Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 200mm Spring length Rear: 200mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 450mm-490mm Coilover overall length Rear: 525mm-620mm Shock type: Twin tube Spring Preload: 7-10 mm
Colour: red body with black spring Package included Complete coilovers assembly 2 front & 2 rear A pair wrench for height adjustment Dimension Package dimension: 64*52*21 Weight: 23260g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 2. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. 3. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. 4. Twin-Tube structure allows sufficient stroke within the shock absorber. 5. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 6. Separate height adjustment does not affect damper stroke. 7. Height can be adjusted with coilovers installed on the vehicle. 8. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 9. Height Adjustment tools included. 10. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 11. Steel shock bodies with special surface treatment to improve the durability. 12. Full rebuildable.




...

Introduction Ma Xpeeding Rods-B3 series (also called Ma Xpeeding Rods-SLC) based on Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible For Honda Accord DX/EX/LX 1990-1997, Chassis Code: CB7/CD5/CD7 Compatible For Honda Acura CL 1997-1999, Chassis Code: YA Specification Front & Rear top mount: rubber Damping: 24 levels rebound damping adjustable Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 200mm Spring length Rear: 200mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 450mm-490mm Coilover overall length Rear: 525mm-620mm Shock type: Twin tube Spring Preload: 7-10 mm
Colour: red bod...


...

Introductionma Xpeedingrods T7 coil-overs are designed for daily street use & Junior track use. It features racing damping oil, an upgraded racing spring, height adjustable, & an adjustable camber plate (applicable for some vehicles), which offers you a lowered stance & enhanced handling. Application Compatible for Honda Acoord VIII Sedan (USA) CP2/CP3 2008-2012 compatible for Acura TSX Sedan (USA) CU2 2009-2014, excluding Special Edition compatible for Honda Accord VIII Coupe CS1CS2 (USA) 2008-2012 compatible for Acura TSX Sport Wagon (USA) 2011-2013 compatible for Honda Accord VIII Sedan (EU/JPN) CU1 2008-2013 compatible for Honda Accord VIII Type-S Sedan (EU/JPN) CU2 2008-2013 compatible for Honda Accord Tourer Wagon (EU/JPN) CW1/CW2/CW32008-2013 compatible for Honda Euro Sedan (Australia& New Zealand) CU1/CU2 2008-2015 Note: Accord trim levels EX, EX-L, LX-S, & compatible for Acura TSX Sedan & Sport Wagon have strut tower bar mounting points. Accord trim levels LX, SE, & LX... ...

Introduction MXR-SLC based on MXR-SNA coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application 2005-2014 compatible for Ford Mustang S-197 2005-2014 compatible for Ford Mustang GTS-197 Specification Top mount: Front camber plate Damping: 24 levels rebound damping adjustable Front spring rate: 8kg/mm (448 lbs/in) Rear spring rate: 6kg/mm (336 lbs/in) Adjustable

Height: lowering 1-3 inch Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold body with black spring Package included Front complete coilover assembly Rear springs & spring adjusters & shocks A pair of front drop links A pair wrench for height adjustment Dimension Package dimension: 71*51*21 Weight: 27400g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. 3. Camber plate top mounts help to eliminate the need for a separate camber kit. 4. Twin-Tube structure allows sufficient stroke within the shock absorber. 5. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 6. Separate height adjustment does not affect damper stroke & height can be adjusted with coilovers installed on the vehicle. 7. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 8. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 9. Steel shock bodies with special surface treatment to improve the durability. 10. Full rebuildable Note NOT compatible for Shelby for GT500 Models




...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Honda CRV series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for HONDA CRV CR-V 2007-2011 Specification Quantity: 2 pieces front + 2 pieces rear Spring rate Front: 6kg/mm (336 lbs/in) Spring rate Rear: 8kg/mm (448 lbs/in) Adjustable Damper: 24 ways adjustable damper force Adjustable

Height: Yes Adjustable camber plate: No
Colour: Golden Warranty: one year warranty for any manufacturing defect Feature- Adjustable ride height- Adjustable pre-load spring tension- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response- All inserts come with fitted rubber boots to protect the damper & keep clean.- Improve your handling performance without sacrifice comfortable ride.-A fast & affordable way to easily upgrade your car's appearance.- Easy installation with right tools.- Ideal for any track, drift & fast road & can also be used for daily driving.-Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down. -Hi tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance. Notice- No instruction included; Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.




...