Applications: Compatible for HONDA CIVIC VIII 2-door coupe (FG1/FG2) 2006-2011 Compatible for HONDA CIVIC VIII 4-door sedan (FA1/FA2/FA3/FA4/FA5, North America only) 2006-2011 Compatible for HONDA CIVIC VIII 4-door sedan (FD1/FD2/FD3/FD4/FD6/FD7, International model) 2006-2011 Compatible for Acura CSX 4-door sedan（ Canada）2006-2011NOTE: not for the Si / Mugen trim level Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specifications: Quantity: 2 pieces front + 2 pieces rear（ Split rear shock absorber） Front Spring Rate: 7 kg/mm (392 in/lbs) Rear Spring Rate: 6 kg/mm (336 in/lbs)
Colour: Red Damper: 24 ways adjustable damper force Adjustable

Height: YESAdjustable Camber Plate: Yes, with Pillow ball top mount Warranty: one year warranty for any manufacturing defect These Coilovers are " Lowering Kit" & DOES NOT adjust to Factory Ride Height. No drilling, cutting, or modification necessary.SPECIAL NOTES: Prior to installation, verify all hardware & properly tighten. Feature: - Able to lower ride height by 1''-3''; allows user to have a more aggressive stance.- Coilovers are 24-way adjustable. Rebound & Dampening adjustment which allows the user the ability to dial in your coilovers to any driving needs. The user can enjoy a comfortable riding experience in all road conditions.- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response.- Twin-Tube Shock design is used for low internal frictional resistance in order to increase efficiency & keep shock temps low.- Height adjustment does not sacrifice damper stroke length.- These coilovers are able to have their height adjusted without being taken out of the car.- Most components of the suspension parts are made from 6061-T6 aluminum to increase strength & rigidity.- High Tensile strength performance spring---Tested under a 600, 000 time continuous compression test, the spring distortion was less than 0.04%. Plus, the special surface treatment improves the durability & performance.- Adjustment tools included in the kit. Notice： * No instruction included; Professional installation alignment suggested. * Please check our store for other auto parts you may be interested in. * Please feel free to contact us for whatever we can help.


...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Mazda series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Mazda 3 BK 2004-2009 Compatible for Mazda 3 BL 2009-2013（

Includes:: Mazdaspeed 3） Specification Product included: Complete coilovers 2 front & 2 rear as shown in the picture Dampening: 24 levels rebound dampening adjustable Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring Preload: 7-10 mm Shock type： Twin tube Color： Red We also have other colors Daily Driving Scene To The Sunday Track Warranty: one year Features- Able to lower ride height by 1''-3''; allows user to have a more aggressive stance.- Coilovers are 24-way adjustable. Rebound & Dampening adjustment which allows the user the ability to dial in your coilovers to any driving needs. The user can enjoy a comfortable riding experience in all road conditions.- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response.- Twin-Tube Shock design is used for low internal frictional resistance in order to increase efficiency & keep shock temps low.- Height adjustment does not sacrifice damper stroke length.- These coilovers are able to have their height adjusted without being taken out of the car.- Most components of the suspension parts are made from 6061-T6 aluminum to increase strength & rigidity.- High Tensile strength performance spring---Tested under a 600, 000 time continuous compression test, the spring distortion was less than 0.04%. Plus, the special surface treatment improves the durability & performance.- Adjustment tools included in the kit. Notice-No instruction included; Professional installation alignment suggested.-Please check our store for other auto parts you may be interested in.-Please feel free to contact us for whatever we can help.


...

Introduction MXR-B3 series (also called MXR-SLC) based on MXR-B2 series (also called MXR-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for NISSAN 350Z coupe 2003-2008 USA (Z33) Compatible for NISSAN 350Z ROADSTER convertible 2003-2008USA (Z33 ) Compatible for INFINITI G35 COUPE 2003-2007USA (V35) RWD Compatible for INFINITI G35 SEDAN 2003-2006USA (V35) RWD Note: (not for G35X sedan) Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Top mounts: pillow ball top mount front & rear. Damping: 24 levels rebound damping adjustable Front Spring Rate: 10kg/mm (560 lbs/in). Rear Spring Rate: 7kg/mm (392 lbs/in). Adjustable

Height: Yes lowering 1" to 3". Shock type: Twin tube. Spring Preload: 7-10 mm.
Colour: gold Package includedproduct included: complete coilovers 2 front & 2 rear, a pair wrench for height adjustment. Dimension Gross weight: 26.24kg Package

Size: 70*50*19cm Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Pillow ball top mount
- It improves the steering feel & response. 3. Twin-Tube structure allows sufficient stroke within the shock absorber. 4. Complete Suspension Kit of 4 Shock Absorbers 4 Springs for an easy installation. 5. Separate height adjustment does not affect damper stroke. 6. Height can be adjusted with coilovers installed on the vehicle. 7. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 8. Height Adjustment tools included. 9. Full rebuildable. 10.A 24 rebound dampening adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Warranty: one year warranty for any manufacturing defect







...

Application Compatible for INFINITI G37 SEDAN 2009-2015 V36USARWD only Compatible for INFINITI G37 COUPE 2008-2013 V36USA EXC 4WD Compatible for NISSAN 370Z 2009+Z34 USA Coupe & Roadster Compatible for NISSAN 370Z NISMO Z34 2009+USA NISMO COUPE（not for convertible） Specification Top mounts: pillow ball top mount front & rear. Damping: 24 levels rebound damping adjustable. Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 230mm Spring length Rear: 200mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 500mm-600mm Coilover overall length Rear: 465mm-525mm Shock type: Twin tube. Spring Preload: 7-10 mm.
Colour: gold. Note： True Rear，not Divorced Rear (OEM Style) Package includedproduct included: complete coilovers 2 front & 2 rear, a pair wrench for height adjustment. Dimension Gross weight:23.68 kg Package
Size:63*50.5*20 cm Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Pillow ball top mount
- It improves the steering feel & response. 3. Radial bearing in upper spring compatible for seat helps fast steering. 4. Twin-Tube structure allows sufficient stroke within the shock absorber. 5. Complete Suspension Kit of 4 Shock Absorbers 4 Springs for an easy installation. 6. Separate height adjustment does not affect damper stroke. 7. Height can be adjusted with coilovers installed on the vehicle. 8. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 9. Height Adjustment tools included. 10. Full rebuildable. 11.A 24 rebound dampening adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Warranty: one year warranty for any manufacturing defect






...

Introduction Ma Xpeedingrods's STRUT ASSEMBLY use high-quality materials & advanced technology to provide customers with products comparable to the original equipment's quality. Each strut assembly is carefully designed according to OE specifications & ISO quality standards, & is factory tested for reliability, durability & function to ensure that it can meet the specific needs of each vehicle model. They effectively reduce the bumps & vibrations of the vehicle body, creating a smooth suspension system for a comfortable & stable driving & handling experience, whileeffectively reduce the noise of the vehicle & improve the overall driving quality. Application Compatible For Honda Accord 1998-2002 Compatible For ACURA CL 2001 -2003 All Models Compatible For ACURA TL 1999 -2003 All Models OE/ Part number 171691L 133635L 1191171691R 133635R 1192SR437 Dimension Weight:14.35kg
Size:61*26.5*16.5cm Feature 1. The strut assembly uses Japanese ENEOS brand damping oil to ensure that the shock ab...
...

Application Compatible For Dodge Dart 1963-1976 Compatible For Dodge Duster 1970-1977 Compatible For Plymouth Barracuda 1964-1969 Compatible For Plymouth Savoy 1962-1964 Compatible For Plymouth Fury 1962-1963 Compatible For Plymouth Valiant 1960-1966 Compatible For Plymouth Scamp 1971-1976 Specification Keeps axle from rotating Package
Includes: Tie Plates w/ Shock mounts Traction Bars Pivot Springs Hardware Just As picture shows Feature* Fully bolt-on, no cutting, welding, or modification to OEM suspension required* Prevents axle rotation, helps maintain pinion angle* Improve 60ft time* Fully preload adjustable* Eliminate spring wrap* Powder-coated grey finish Note No Instruction Included Please feel free to contact us for whatever we can help.
...

Application Compatible for Hyundai H-1 2.5L CRDI D4CB 2000-Compatible for Hyundai Starex 2.5L CRDI D4CB 2000-OEM/ Part No.28200-4A001, 282004A101, 710060-5001 710060-1, 710060-0001, 710060-5001S, 710060-3, 710060-0003, 710060-5003 S Features
- Condition: New Factory Balanced
- Bearing Type: Journal Bearing
- Accessories: You will get exactly as shown in the picture above Notice
- Please confirm your old turbo part number matches up with one of the part numbers above
- Professional installation is highly recommended (No Instruction Included)
- It is for repairing or rebuilding the complete turbo Warranty: one year warranty for any manufacturing defect





...

Application Compatible for KIA Sorento 2.5 CRDI D4CB 140HP 103kw 2002-Specification Part Number: 733952-5004S 733952-5001S 733952-0004 733952-0001, 733952-1 733952-2 733952-3 733952-4 733952-5, 733952-6 733952-7 733952-8 733952-9 733952-10, 28200-4A101, 282004A101, 28200 4A101 Bearing Type: Journal Bearing Accessories: You will get exactly as shown in the picture Warranty: one year warranty for any manufacturing defect Condition: New Note Please confirm your old turbo part number matches up with one of the part numbers above Professional installation is highly recommended (No Instruction Included) For any needs please contact us ...

Application Compatible for Audi A3 2.0L 2008 Compatible for Audi A3 2.0L 2006-07 Compatible for Audi A4 2.0L 2005-08 Compatible for Audi TT 2.0L 2009-13 Compatible for VW Eos 2.0L 2007-09 Compatible for VW GTI 2.0L 2006-08 Compatible for VW Jetta 2.5L 2005-07 Compatible for VW Jetta 2.0L 2006-07 Compatible for VW Passat 2.0L 2006-07 Compatible for VW Rabbit 2.5L 2006-07OEM & Part Number 06F109257C, 06F109257A06F 109 257C, 06F 109 257A, 100652T1066, TS1066, 917-271, 2T1066 Warranty: one year warranty for any manufacturing defect ...

Applications Compatiblefor Ford 1957 1960 1962 144 Cu. 170 Cu. 200 Cu. 223 Cu. 6 Cyl. Engines Compatiblefor Holley 1904 Model 1957 to 1962 Specifications This carburetor is all new universal zinc aluminum alloy 1 barrel carburetor with a manual choke Fit 1957 1960 1962 144 170 200 223 inline 6 cylinder engines used in any compatible for Ford product. Please check carefully before ordering. Package
Includes:: 1x Carburetor Condition: New Warranty: one year warranty for any manufacturing defect Accessories: You will get exactly as shown in the picture above Note Make sure the distance between the mounting bolt holes (5.5cm/2.165'') as the same with your old carburetor. No instruction included; Professional installation alignment suggested. Please check our store for other auto parts you may be interested in. Please feel free to contact us for whatever we can help.
...