Application NOTE: 1) Dana M210 Wide Front Axle, 3.73 Rear Axle Ratio, Tru-Lok Front & Rear Axles & 4:1 Rock-Trac Heavy Duty Part Time 4WD System. 2) Not fit 205MM Front Axle or 4.10 Rear Axle Ratio. 3) Fits the model built before 07/22/2021 compatible for Jeep Wrangler 2.0L Turbo I4 2018-07/22/2021 compatible for Jeep Wrangler 3.0L Turbo V6 2018-07/22/2021 compatible for Jeep Wrangler 3.6L V6 2018-07/22/2021OE/ Part number 68400721AASpecification Condition: New Position:  Front
Material: Cast Iron Axle Ratio: 3.73, not fit 4.10 Dana: M210, not fit 205MM Fitment Type: Direct Replacement Axle Housing:  Included Upper Ball Joints:  Included Lower Ball Joints:  Included Gear & differential: Not Included Package included 1x Front Axle Housing (Showing as the picture) Note: Just Axle Housing, Upper Ball Joints, Lower Ball Joints Feature*OEM standard

Size: Perfectly fitment * Manufactured with precision to meet the standard ISO9001 * Strict quality control: Our factory has done the dynamic balancing t...


...

Application Compatible for Jeep Wrangler 2007-2017 All Engine 3.21 Front Axle Ratio, Dana 30 only Compatible for Jeep Wrangler JK 2018 All Engine 3.21 Front Axle Ratio, Dana 30 only Compatible for 3.6L 3604CC 220 Cu. In. V6 GAS DOHC Naturally Aspirated Compatible for 3.8L 3778CC 231 Cu. In. V6 GAS OHV Naturally Aspirated Replace Part Number 68004068AA, 68004068AB, 68004068AC Specifications Package
Includes::1x Front Axle Housing Assembly Type: Axle Hosuing, Drive Axle Assembly Axle Ratio: 3.21, not fit 4.10 Placement on Vehicle: Front Condition: New Warranty: one year Features OEM standard

Size: Perfectly fitment Manufactured with precision to meet the standard ISO9001 Strict quality control: Our factory has done the dynamic balancing test & adjusted on the balancing machine before delivery Anti-Rust Paint Coating: Wear resistance & long-lasting durability High rigidity: made from high-quality steel with high strength Structural advantage: when checking or disassembli...


...

Application Compatible for Jeep Wrangler JL 2.0L L42021.7 Note: Fits for the model built before 07/22/2021 Fits for 2.72:1 Selec-Trac Full Time 4WD System, Dana M210 Wide Front Axle, 3.73 Rear Axle Ratio & Conventional Differential Frt Axle. NOT fit 205MM Front Axle or 4.10 Rear Axle Ratio.OE/ Part number 68539881AASpecification Condition: New Position:  Front
Material: Cast Iron Dana: M210, Not fit 205MM Rear Axle Ratio: 3.73, Not fit 4.10 Fitment Type: Direct Replacement Axle Housing:  Included Upper Ball Joints:  Included Lower Ball Joints:  Included Gear & differential: Not Included Package included 1x Front Axle Housing (Showing as the picture) Note: Just Axle Housing, Upper Ball Joints, Lower Ball Joints Feature*OEM standard

Size: Perfectly fitment * Manufactured with precision to meet the standard ISO9001 * Strict quality control: Our factory has done the dynamic balancing test & adjusted on the balancing machine before delivery * Anti-Rust Paint Coating: Wear resistance & long-lasti...


...

Application Dana 44 M210 Front Rubicon Only compatible for Jeep Wrangler JL Rubicon Only 2018-2020OE/ Part number 68400405, 68400405AASpecification Condition: New Position:  Front
Material: Cast Iron Dana 44， Ratio 3.73 Fitment Type: Direct Replacement Axle Housing:  Included Upper Ball Joints:  Included Lower Ball Joints:  Included Gear & differential: Not Included Package
Includes:: 1x Front Axle Housing (Showing as the picture) Note: Just Axle Housing, Upper Ball Joints, Lower Ball Joints Feature*OEM standard

Size: Perfectly fitment * Manufactured with precision to meet the standard ISO9001 * Strict quality control: Our factory has done the dynamic balancing test & adjusted on the *balancing machine before delivery * Anti-Rust Paint Coating: Wear resistance & long-lasting durability * High rigidity: made from high-quality steel with high strength * Structural advantage: when checking or disassembling the main reducer & differential, the entire drive axle does not need to be removed from the v...



...

Application Compatible for Ford Super Duty F250 F350 F450 F550 Dana 50, 60，1998-2004OE/ Part number 50491，50381，41784-2 Specification

...

Application Front Axle Tube Seals Model Reference: Compatible for Jeep Cherokee XJ 1984-2001 compatible for Jeep Grand Cherokee 1984-2001 compatible for Jeep Wrangler YJ 1987-1995 compatible for Jeep Wrangler TJ 1997-2006 compatible for Jeep Wrangler TJL 2004-2006 compatible for Jeep Wrangler JK & JK Unlimited 2007-2010 Note: These oil seals will not work with passenger-side, vacuum-disconnect, two-piece axle shafts. Inner Axle Side Seal Installation Tool Compatibility Differentials: Dana 30 Front, Crush Sleeve Design, compatible for Grand Cherokee Dana 30 Front, Standard Rotation Dana 30 Front, JK Non-Rubicon Dana 30 Rear Dana 30 Front, Crush Sleeve Design, TJ compatible for Wrangler Dana 44 Front, Standard Rotation Dana 44, 19 Spline Dana 44 IFS Front, '92 & older Dana 44 IFS Front, '93 & newer Dana 44 Rear, compatible for Jaguar Dana 44 Reverse Rotation Front, JK Rubicon Dana 44 Rear, JK Rubicon Dana 44 Rear, Non-Rubicon JK Dana 44 Rear Dana 44 Front, Reverse Rotation, Straigh... ...

Application Compatible for Ford Super Duty F250 F350 F450 F5502005-2019OE/ Part number 2023068, 2014835, 54983, Specification Placement on Vehicle： Front, Left, Right Material： Steel， Rubber Drive Type：4WDPackage included 2*2014835 Updated Outer Tube Dust Seal 2*2023068 Inner Knuckle Seal 2*54983 O RINGNote Professional installation is highly recommended. Please double confim the compatibility as well as the OEM number before purchasing. ...

Introduction Brand new in original packaging. Exactly the same as shown in the picture! Package will come in 1 pair of front adjustable lower ball joints 6 pieces of rear adjustable camber arm kit. The camber kit allows for precise changes when fine tuning suspension alignment angles necessary when racing or drifting. Front Ball Joints Adjustment: -max to +1.5 Degrees. Rear Camber Adjustment: -3.0 to +3.0 Degrees. Rear Toe Adjustment: -1.0 to +1.0 Degree. Eliminates tire wear while improving stability. Professional installation highly recommend. Fitment: 08-13 compatible for Honda Accord models only. 09-13 compatible for Acura TL models only. 09-13 compatible for Acura TSX models only. Application Compatible for Honda Accord Models 2008-2013 Only Compatible for Acura TL Models 2009-2013 Only Compatible for Acura TSX Models 2009-2013 Only Specification 1.
Material: High Tensile Strength Carbon Steel Bushing: High Quality Rubber bushings 2. Durable Powder Coating Treatment：provides superior...
...

Introduction New in original packaging. Exactly the same as shown in the picture! Package will come in 1 pair of front adjustable lower ball joints & 6 pieces of rear adjustable camber arm kit. The camber kit allows for precise changes when fine tuning suspension alignment angles necessary when racing or drifting. Front Ball Joints Adjustment: -max to +1.5 Degrees. Rear Camber Adjustment: -3.0 to +3.0 Degrees. Rear Toe Adjustment: -1.0 to +1.0 Degree. Eliminates tire wear while improving stability. Professional installation highly recommend. Fitment: 08-13 compatible for Honda Accord models only. 09-13 compatible for Acura TL models only. 09-13 compatible for Acura TSX models only. Application Compatible for Honda for Accord Models 2008-2013 Only Compatible for Acura TL Models 2009-2013 Only Compatible for Acura TSX Models 2009-2013 Only Specification Condition: New
Material: Carbon Steel
Colour: Black Surface Finish: Spraying Plastics Item Weight：8.16kg Package Dimension: 71*13*12cm Packag included: Front Ball Joint + Rear Camber Control Arm Toe Kit Feature* Front adjustable lower ball joints, Rear adjustable camber arm kit * Strong, lightweight construction
- made from high quality carbon steel! * Provides maximum of +/-3.0 degrees camber & +/-1.0 degree toe adjustment of rear wheels. * Improves Rear Suspension, Handling, Predictable Response & even Prevents Premature Tire Wearing Note* Instruction is not included. Professional installation is highly recommended. * Will not work with vehicles equipped with drum brakes. Some modifications may be required! Works only with disc brake applications only, no drum brakes.


...

Application: Compatible for Dodge Ram Pro Master 1500 2019-2022 Compatible for Dodge Ram Pro Master 2500 2019-2022 Compatible for Dodge Ram Pro Master 3500 2019-2022 OE/ Part Number: 1ZT92JXWAA, 1ZT96JXWAA, 1306563070 1ZT91JXWAA, 1ZT94JXWAA, 1306560070 Specification: Type: Front Bumper End Cap With Flare
Material: Plastic
Colour: Black Placement on Vehicle: Front, Left, Right Fitment Type: Direct Replacement Condition: 100% Brand New Warranty: one year Package Included: 1 Pair Front Bumper Side Cover With Flare Trim Note: 1. Professional installation is highly recommended. 2. Please double confim the compatibility as well as the OEM number before purchasing.

...