About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

Front and Rear Coilovers Top Mounts & Struts compatible for Honda CR-V 2.4L 2007 2008-2011
Front And Rear
Coilovers Top Mounts &
Struts Compatible
For Honda CR-V 2.4L
2007 2008-2011
$319
Introduction MXR-B3 is based on MXR-B2 coil-overs, which are also height adjustable. They are also made for street use, but the 24-level rebound damping control allows you the ability to perfectly dial in your coil-over setup. You will experience better ride quality in all road conditions. Application Compatible for HONDA CRV CR-V 2007-2011 Specification Front top mount: Pillow ball Rear top mount: Standard rubber Damping adjustable: Available, 24 levels of rebound damping force Camber adjustable: Not available Height adjustable: Yes, lowering 25-75 mm depending on the vehicle models Spring Rate Front: 6 kg/mm (336 lbs/in) Spring Rate Rear: 6 kg/mm (336 lbs/in) Front spring inner diameter: 70.5 mm Rear spring inner diameter: 70.5 mm Spring length Front: 230 mm Spring length Rear: 160 mm Spring Preload advised: 7-10 mm
Colour: Golden body with black spring Package included Package included：2x Front coil-overs 2x Rear coil-overs 2x C spanners 1x Allen wrench Dimension Package size: 70*50*20 cm Weight: 27800 g Fe...
...
Available
Front and Rear Cover + Oil Pan Alignment Tool for LS Engines LS1 LS2 LS3
Front And Rear Cover +
Oil Pan Alignment Tool
For LS Engines LS1 LS2
LS3
$31
Application: for LS series engines 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92 Instructions: * This Front & Rear Cover Alignment Tool Kit is used to install the front cover on any compatible for LS engine. * Align the seal with the front diameter & rear sealing surface of the balancer hub completely concentrically to achieve proper sealing function & service life. * You must be very careful to align the cover horizontally with the oil pan. Feature: 1. Can be replaced the oil pump, timing chain, oil pan gasket & front seal; 2. Used this tool to line up the front seal. Worked perfectly; 3. Seal lined up & no leaks at all. How to install the Front Cover (the seal is not installed in the front cover): * Loosely install the front cover; * Install the big end of the sealing tool on the nozzle of the crankshaft; * Check the alignment with the oil pan; * Install the balancer lip seal. Package
Includes:: 1* Front & Rear Cover Alignment Tool 1* Oil Pan Align...
...
Archived Product
image missing
Front And Rear Shock
Absorbers Fit For
Navara D22 4x 4 Ute
4wd Frontier 97-2016
$101
Applicationfor 1997-2016 compatible for Nissan Navara D22 4x 4 Ute
- Standard Height Springs ONLYSpecificationtwin-tube design
...
Archived Product
image missing
Front Axle Actuator
Fork Assembly
Disconnect
Compatible For Dodge
Ram 2500
3500 2019-2023
$81
Application Compatible for Dodge Ram 2500 3500 Diesel 2019-2023OE/ Part number 68449574AASpecification Type: Front Axle Actuator Fork Placement on Vehicle： Front, right
Colour: Black Drive Type：4WD
...
Archived Product
image missing
Front Axle
Differential Carrier
31507594314
Compatible For BMW
Active Hybrid 31507594314
$536
Application: Compatible for BMW X6 x Drive 35i 3.0L L6
- Gas 2019 Compatible for BMW 320i Base 2.0L L4
- Gas 2018 Compatible

...
Archived Product
image missing
Front Axle Housing
Compatible For Jeep
Wrangler 2.0L
3.0L 3.6L 6.4L
68388729AA 2018-2022
$1011
Application Compatible for Jeep Wrangler 2.0L 3.0L 3.6L 6.4L2018-2022 Note: Fit Dana 30 only, not fit Dana 44. Note: Fit 3.45 Front Axle Ratio Note: Fits 2018-2022 compatible for wrangler left hand drive, small 205mm or 7.32" ring gear.OE/ Part number 68388729AA, 68388729AB, 437-10100, 437-10025 Specification Condition: New Position:  Front
Material: Cast Iron Dana: 30, not fit 44 Axle Ratio: 3.45 Fitment Type: Direct Replacement Axle Housing:  Included Upper Ball Joints:  Included Lower Ball Joints:  Included Gear & differential: Not Included Package
Includes:: 1x Front Axle Housing (Showing as the picture) Note: Just Axle Housing, Upper Ball Joints, Lower Ball Joints Feature*OEM standard

Size: Perfectly fitment * Manufactured with precision to meet the standard ISO9001 * Strict quality control: Our factory has done the dynamic balancing test & adjusted on the *balancing machine before delivery * Anti-Rust Paint Coating: Wear resistance & long-lasting durability * High rigidity: made from high-q...



...
Archived Product
image missing
Front Axle Housing
Compatible For Jeep
Wrangler 2.0L Turbo I4
M210 3.73 Rear Ratio
$976
Application NOTE: 1) Dana M210 Wide Front Axle, 3.73 Rear Axle Ratio, Tru-Lok Front & Rear Axles & 4:1 Rock-Trac Heavy Duty Part Time 4WD System. 2) Not fit 205MM Front Axle or 4.10 Rear Axle Ratio. 3) Fits the model built before 07/22/2021 compatible for Jeep Wrangler 2.0L Turbo I4 2018-07/22/2021 compatible for Jeep Wrangler 3.0L Turbo V6 2018-07/22/2021 compatible for Jeep Wrangler 3.6L V6 2018-07/22/2021OE/ Part number 68400721AASpecification Condition: New Position:  Front
Material: Cast Iron Axle Ratio: 3.73, not fit 4.10 Dana: M210, not fit 205MM Fitment Type: Direct Replacement Axle Housing:  Included Upper Ball Joints:  Included Lower Ball Joints:  Included Gear & differential: Not Included Package included 1x Front Axle Housing (Showing as the picture) Note: Just Axle Housing, Upper Ball Joints, Lower Ball Joints Feature*OEM standard

Size: Perfectly fitment * Manufactured with precision to meet the standard ISO9001 * Strict quality control: Our factory has done the dynamic balancing t...


...
Archived Product
Front Axle Housing compatible for Jeep Wrangler 2007-2017 JK 2018 3.21 Axle Ratio Dana 30
Front Axle Housing
Compatible For Jeep
Wrangler 2007-2017
JK 2018 3.21 Axle
Ratio Dana 30
$814.99
Application Compatible for Jeep Wrangler 2007-2017 All Engine 3.21 Front Axle Ratio, Dana 30 only Compatible for Jeep Wrangler JK 2018 All Engine 3.21 Front Axle Ratio, Dana 30 only Compatible for 3.6L 3604CC 220 Cu. In. V6 GAS DOHC Naturally Aspirated Compatible for 3.8L 3778CC 231 Cu. In. V6 GAS OHV Naturally Aspirated Replace Part Number 68004068AA, 68004068AB, 68004068AC Specifications Package
Includes::1x Front Axle Housing Assembly Type: Axle Hosuing, Drive Axle Assembly Axle Ratio: 3.21, not fit 4.10 Placement on Vehicle: Front Condition: New Warranty: one year Features OEM standard

Size: Perfectly fitment Manufactured with precision to meet the standard ISO9001 Strict quality control: Our factory has done the dynamic balancing test & adjusted on the balancing machine before delivery Anti-Rust Paint Coating: Wear resistance & long-lasting durability High rigidity: made from high-quality steel with high strength Structural advantage: when checking or disassembli...


...
Archived Product
image missing
Front Axle Housing
Compatible For Jeep
Wrangler JL 2.0L
2021 4WD Dana M210
68539881AA
$891
Application Compatible for Jeep Wrangler JL 2.0L L42021.7 Note: Fits for the model built before 07/22/2021 Fits for 2.72:1 Selec-Trac Full Time 4WD System, Dana M210 Wide Front Axle, 3.73 Rear Axle Ratio & Conventional Differential Frt Axle. NOT fit 205MM Front Axle or 4.10 Rear Axle Ratio.OE/ Part number 68539881AASpecification Condition: New Position:  Front
Material: Cast Iron Dana: M210, Not fit 205MM Rear Axle Ratio: 3.73, Not fit 4.10 Fitment Type: Direct Replacement Axle Housing:  Included Upper Ball Joints:  Included Lower Ball Joints:  Included Gear & differential: Not Included Package included 1x Front Axle Housing (Showing as the picture) Note: Just Axle Housing, Upper Ball Joints, Lower Ball Joints Feature*OEM standard

Size: Perfectly fitment * Manufactured with precision to meet the standard ISO9001 * Strict quality control: Our factory has done the dynamic balancing test & adjusted on the balancing machine before delivery * Anti-Rust Paint Coating: Wear resistance & long-lasti...


...
Archived Product
image missing
Front Axle Housing
Compatible For Jeep
Wrangler JL
Rubicon 4WD Dana 44
M210 Axle Ratio 3.73
$1116.99
Application Dana 44 M210 Front Rubicon Only compatible for Jeep Wrangler JL Rubicon Only 2018-2020OE/ Part number 68400405, 68400405AASpecification Condition: New Position:  Front
Material: Cast Iron Dana 44， Ratio 3.73 Fitment Type: Direct Replacement Axle Housing:  Included Upper Ball Joints:  Included Lower Ball Joints:  Included Gear & differential: Not Included Package
Includes:: 1x Front Axle Housing (Showing as the picture) Note: Just Axle Housing, Upper Ball Joints, Lower Ball Joints Feature*OEM standard

Size: Perfectly fitment * Manufactured with precision to meet the standard ISO9001 * Strict quality control: Our factory has done the dynamic balancing test & adjusted on the *balancing machine before delivery * Anti-Rust Paint Coating: Wear resistance & long-lasting durability * High rigidity: made from high-quality steel with high strength * Structural advantage: when checking or disassembling the main reducer & differential, the entire drive axle does not need to be removed from the v...



...
Archived Product

Front Axle Housing Assembly Compatible For Jeep Wrangler 3.8L
68017174AC 68017169AD 2007-11

ApplicationCompatible for Jeep Wrangler 3.8L V6 2007-2011 compatible for Jeep Wrangler 3.6L V6 2012-2015OE/Part number68017174AC, 68017174AA, 68304510AA, 68017174ABSpecificationCondition: New Position: Front Material: Cast Iron Dana: 44, not fit 30 Axle Ratio: 3.73, not fit 4.10 Fitment Type: Direct Replacement Axle Housing: Included Upper Ball Joints: Included Lower Ball Joints: Included Gear and differential: Not Included Package size(cm):153*37*36 Package weight(kg):49 Package Includes: 1x Front Axle Housing(Showing as the picture) Note: Just Axle Housing, Upper Ball Joints, Lower Ball JointsFeature*OEM standard size: Perfectly fitment *Manufactured with precision to meet the standard ISO9001 *Strict quality control: Our factory has done the dynamic balancing test and
adjusted on the *balancing machine before delivery *Anti-Rust Paint Coating: Wear resistance and long-lasting durability *High rigidity: Made of high-quality steel with high strength *Structural advantage: when checki...
RIP - This product is no longer available on our network. It was last seen on 20.01.2026

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • External links may include paid for promotion
Availability: In Stock
$802
maxpeedingrods Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts
Description Reviews / Comments Add New

Product Description

Application Compatible for Jeep Wrangler 3.8L V6 2007-2011 compatible for Jeep Wrangler 3.6L V6 2012-2015OE/ Part number 68017174AC, 68017174AA, 68304510AA, 68017174ABSpecification Condition: New Position:  Front
Material: Cast Iron Dana: 44, not fit 30 Axle Ratio: 3.73, not fit 4.10 Fitment Type: Direct Replacement Axle Housing:  Included Upper Ball Joints:  Included Lower Ball Joints:  Included Gear & differential: Not Included Package size (cm):153*37*36 Package weight (kg):49 Package
Includes:: 1x Front Axle Housing (Showing as the picture) Note: Just Axle Housing, Upper Ball Joints, Lower Ball Joints Feature*OEM standard

Size: Perfectly fitment * Manufactured with precision to meet the standard ISO9001 * Strict quality control: Our factory has done the dynamic balancing test & adjusted on the *balancing machine before delivery * Anti-Rust Paint Coating: Wear resistance & long-lasting durability * High rigidity: made from high-quality steel with high strength * Structural advantage: when checki...

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Steel - An alloy made predominately of Iron combined with <2% carbon
OEM - Original equipment manufacture, unbranded products for the retailer to brand as thei own.
Cm - Centimetres, one centimetre is equal to 10 milimetres
iron - An electrical deviced used for removing creases from fabrics
iron - A chemical element (FE). The most common element on earth
delivery - The method by which something is delivered from one location to another
weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz
Quality - An object that has quality is superior in function and finish than a less quality object.
Size - is the measurement of how big an object is in space.
Assembly - A gathering of people for a purpose e.g. a school assembly
Assembly - A gathering of people all together for the same purpose.
Joints - The sections where one component is joined to another.

Supplier Information

Maxpeeding Rods US
Rev up your engine with Maxpeedingrods (https://www.maxpeedingrods.com/)! Explore a wide selection of high-performance auto parts and accessories at unbeatable prices. From turbochargers and connecting rods to coilovers and camshafts, we've got everything you need to boost your ride's power and style. With top-notch quality and expert engineering, our products are designed to maximize performance and reliability on the road or track. Whether you're a car enthusiast or a professional racer, trust Maxpeedingrods to take your driving experience to the next level. Shop now and unleash the full potential of your vehicle!
Page Updated: 2026-01-20 12:40:53

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu