More From Contributor

$77
Application Compatible for Ford 1996-2003 4.6L, 5.4L, & 6.8V-10 two valve engines (all other engines will not fit, please check before purchasing.) Vehicle models are for reference only, as follows compatible for Ford Triton two valve models below: Engine 4.6 SOHC 2V for F150 2009*38900 2V's only for F250 1997-1999 for E150 1997-2014 for E250 1998-2014 Compatible for Expedition 1997-2004 Compatible for Explorer 2002-2005 Compatible for Crown Victoria 1992-2011 compatible for Mustang 1996-2004 Excludes Cobra compatible for Lincoln Town Car 1991-2011 compatible for Mercury Grand Marquis 1992-2011 compatible for Mercury Cougar XR7 1994-1997 compatible for Mercury Mountaineer 2002-2005 Engine 5.4 SOHC 2V for F150 1997-2003 for F150 2004*38900 2V's only for F250 & F350 1997-2004 for E150/ Compatible for E-Series 1996-2016 Compatible for Expedition 1996-2004 for Excursion 2000-2005 compatible for Lincoln Navigator 1998-1999*38900 2V's only Engine 6.8 SOHC 2V for F250-550 for F53 1997-20... ...
Archived Product
$94.99
Introduction 2-piece ladder bracket set. Maximum load capacity is 440lbs. Application The ladder bracket is suitable for use on platforms up to 20 inches in width, & can be applied to painting siding, window repairs, general repairs & more. Feature HIGH QUALITY: The ladder bracket is made from alloy steel, using riveting & welding technology to make the structure more stable, durable & not easy to deform. SAFETY: The 20 inch wide platform meets OSHA requirements, the safety screws make the connection between the bracket & the ladder tighter to prevent loosening & falling off, & the left & right groove design greatly improves the stability of the ladder bracket, so that you can work with complete confidence. ADJUSTABLE DESIGN: The ladder bracket can be adjusted form different ladders for a better fit. It is very easy to set up & take down, which can improve your working efficiency. ...
Archived Product
$239.99
Specification Condition:100% Brand New Fitment Type: Direct Replacement Three hole in a row Hole diameter: 25mm Center distance: 88mm Span: 90mm M14 Alignment Package included 1* Universal Hydraulic Thumb Clip 2* Hydraulic Hoses (Showing as the picture) Feature* High-manganese Steel * Abrasion-resistant * High hardness * No deformation * High quality Metal & constructed for Anti-rust & Anti-corrosion. * Fully tested under extreme condition for stable performance & long time use. Note* Only for 3-hole arm. If it is porous (three holes in a row) on the arm of QH12, model TYPH-2008 will work for it, not TYPH- 2008P. If it is single hole (one hole in a row) on the arm, TYPH- 2008P will work. * Please note the L shape bracket on this thumb clip may not compatible with the following excavator models:AGT L12, DIGGIT EM15. Please check the diamensions showing in the picture & compare. * Please confirm the connection size carefully before purchase, only the attachment connection size is same wit... ...
Archived Product
$172
Application For TYPH-1801, TYPH-1802, QH12 excavators. Fit for Most compatible for Mini Excavators within 2 tons.OE/ Part number TYPH- 2008 P Specification Condition:100% Brand New Fitment Type: Direct Replacement One hole in a row - Type: Hydraulic Thumb Clip - Thumb Length :560 mm -Hydraulic Hose Size:M14x 1.5 -Mounting Screw Length:8.3 in. (210 mm) -Mounting Hole Spacing: 3.6 in. (92 mm) -Mounting Screw

Size:
M15x 1.5 -Mounting Screw Diameter: 1 in. (25 mm) Package included 1* Universal Hydraulic Thumb Clip 2* Hydraulic Hoses (Showing as the picture) Feature* High-manganese Steel * Abrasion-resistant * High hardness * No deformation *  High quality Metal & constructed for Anti-rust & Anti-corrosion. * Fully tested under extreme condition for stable performance & long time use. Note* Only for 1-hole arm. If it is single hole (one hole in a row) on the arm, TYPH- 2008P will work. If it is porous (three holes in a row) on the arm of QH12, model TYPH-2008 will work for it, not TYPH- 2008P. * This m...

...
Archived Product
$49
Universal Air Suspension Bag Air Spring 2500 lb Part 1/2"npt Single Port Fit for: Universal Air Suspension Bags compatible for Ford F150/F250, compatible for GMC Sierra, compatible for Chevrolet Silverado, compatible for Dodge Ram 1500 2500 3500, etc (Fits for Most Pickup Trucks, or Classic Car) Part Number:2E2500 Condition: 100% Brand New Quantity: 1 piece (for rear / front left or right) Warranty: one year Warranty for any manufacturing defect. Design

Height:
212mm Min

Height:
110mm Max

Height:
240mm Working Stroke: 130mm Loading Cap. at 3.0bar: 1.48KN Loading Cap. at 7.0bar: 6.23KN Single Air Port

Size:
1/2-14NPT Install Hole

Size:
3/8-16UNC Top Plate Diameter: 113mm Air Spring Bag Body Diameter: 152mm Capacity: 2500 LBS
Features: 1. Features with heavy duty double convoluted crimped design which allows safe & comfortable load capacity up to 2500 pounds. 2. Built to strict quality control standards. 3. Designed for Comfort Suspension. 4...










...
Archived Product
$195
Introduction Looking to boost your car's horsepower? Is your car's original turbocharger not performing well or need replacing? Maxpeedingrods stocks all the best OEM-quality & upgraded turbochargers & turbo parts to give your car the power, performance, & reliability you deserve. K04-001 turbocharger is a upgraded turbo for the K03 model, which could provide the perfect solution for you to boost your car up to 400hp. Application Compatible For Audi A3 upgraded Engine FT 190 4EB/4EA/4EC 1999-2009 Compatible For Audi TT upgraded Engine FT 190 4EB/4EA/4EC 2001-2009 Compatible For Volkswagen BEETLE upgraded Engine 4EB/4EA/4EC 1996-2009 Compatible For Seat IBIZA upgraded Engine 4EB/4EA/4EC 1996-2009 Note:   The Car Make with K03 Model as below Need modify the intake pipe (our K04 compressor inlet is bigger than K03 model): Compatible For Audi A3 with AGU, ALN, ARZ engine 110 KW, 150 PS 1996-2003 Compatible For Audi A3 with AUQ, ARZ, APP  engine 132 KW, 180 PS 1996-2003 Compatible For Audi TT wit... ...
Archived Product
$69
Application Compatible for GM 700R4 (700-R4) (4L60) (4L60E) (4L65E) transmissions.OE/ Part number T-0220-700R4 Specification Replacement for Atec Trans-Tool K&K OTC Kent-Moore SPX T-0220, T-0220-700R4, SKU311. Package included 12 * Bushing Drivers (61-71) 1* Driver Handle. Feature 1. Professional & Efficient: Bushing driver set covers multiple sizes & specifications, suitable for various brands & models of transmissions, each tool is designed according to the special structure of transmission components, & can handle the installation & disassembly tasks of different diameters & types of bushings, bearings, & seals, improving work efficiency 2. Durable & Sturdy: made from high-quality steel materials, it has undergone strict quality testing & process polishing, with excellent durability & stability. It can maintain performance unchanged in long-term & frequent heavy work, making it a good helper for your work 3. Protective Component: Bushing press kit is Equipped with speci... ...
Archived Product
$24.99
T-shirt from maxpeedingrods
- model XXXXLWarranty: one year warranty for any manufacturing defect ...
Archived Product
$247
Turbo T04E Turbocharger with Internal Wastegate Exhaust (Turbo Manifold) Flange: Standard T3/ T4 4-Bolt Exhaust (Downpipe) Flange: Standard 2.50" Inner Diameter V-Band Intake Inlet/ Outlet:3.00"/ 2.00" Compressor: Trim:44 Inducer Diameter:50.5 mm Exducer Diameter:76 mm A/R:0.5 Turbine Trim:73 Inducer Diameter:65.5 mm Exducer Diameter:55.9 mm A/R:0.63 Oil Inlet: M12*1.25 2*M8*1.25 Oil Outlet: 2*M8*1.2527x 7x 2.5 2.5" Universal Intercooler-Inlet/outlet

Size:
2.5"-Core

Size:
21"x 7"x 2.5"-Full

Size:
27.00" (L) X 7.00" (H) X 2.50" (W)-Compress Air Flow Rate 350 Cubic Feet/ Min, Rated up to 500 Max HP-Pressure drop: 2~5psiat 35psi, 0.2~0.5psiat 15psi-
Material: Aluminum alloy-Core design: Tube Fin Maximum PSI 18(1.2 Bar) Specifications Package include 1x T04E V-Band Turbocharger 1x 27x 7x 2.5 2.5" Universal Intercooler Condition: New Bearing Type: Floating Bearing Warranty: one year Accessories: You will get exactly as shown in the picture above Notice* Professional installation is highly recommended (No Instruction Included).* For any needs please contact us.* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.* Make sure the oil drain line is lower than the turbo itself.* Gasoline car must install a water cooling device to avoid overheating.* Ensure exhaust outlet are well sealed by welding.






...
Archived Product
$220
* This is universal application turbo, so modification might be required for some vehicles. Application Perfect for all 4 or 6 CYL, 1.5L-2.5L Engines Turbo T04E Turbocharger Exhaust Inlet (Turbo Manifold) Flange:T34 bolt Flange Patterns Exhaust Outlet Flange:V-Band Flange (ID/OD: 2.5"/3.1") Turbine Side: Turbine Trim: 74.2 Turbine A/R: 0.63 Turbine Inducer: 64.8mm Turbine Exducer: 55.8mm Turbine exhaust outlet: 79mm Turbine exhaust inlet: 44.7mm (length) / 85.8mm (width) Compressor Side: Compressor Trim: 48.1 Compressor A/R: 0.5 Compressor Inducer: 52.7mm Compressor Exducer: 76mm Compressor outlet:78 mm Compressor inlet:51.5 mm Oil Inlet:M12*1.25 & 2*M8*1.25 Oil Outlet:2*M8*1.25 Bearing: Journal Bearing Cooling Type: Oil Cooled Wastegate:w/ Wastegate Thrust Bearings:270 Degrees Hosepower: Up to 420 HP 27x 7x 2.5 2.5" Universal Intercooler -Inlet/outlet

Size:
2.5" -Core

Size:
21"x 7"x 2.5" -Full

Size:
27.00" (L) X 7.00" (H) X 2.50" (W) -Compress Air Flow Rate





...
Archived Product

For Honda Accord VIII LX, SE, LX-P Sedan CP3 2008-2012 Twin-Tube
Damper Coilover Kits

IntroductionMXR-B2 series(also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable and adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, improved performance for your daily use vehicle.ApplicationCompatible for Honda Accord VIII LX, SE, LX-P sedan CP2 2008-2012Compatible for Honda Accord VIII LX, SE, LX-P sedan CP3 2008-2012Compatible for Honda Accord VIII LX, SE, LX-P coupe CS1(north American only) 2008-2012Compatible for Honda Accord VIII LX, SE, LX-P CS2 (north American only) 2008-2012Compatible for Honda Accord VIII LX, SE, LX-P sedan CU1 CU2 CU3 2008-2015Compatible for Honda Accord VIIITourer 5-door wagon CW1 2008-2015Compatible for Acura TSX(North America)
2009-2015Compatible for Accord Euro (Australia and New Zealand)2008.6-2015.7SpecificationTop mounts: Standard rubber top mount front and rear Damping: Not available Shock type: Twin tube Adjustable height: Yes lowering 1'' to 3'' Adjustable camber plate: No Spring preload: 7-10 mm Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) color: GoldenPackage includedcomplete coilovers 2 front and 2 rear as shown in the pictureDimensionSize: 63*51*21 cm Weight: 22.6 kgFeatureLowered height adjustment from 1" - 3" which allow lower center of gravity and also add a more aggressive stance. Twin-Tube structure allows sufficient stroke within the shock absorber. Rubber top mounts help to deliver a smooth and forgiving ride for city use at any speed and rubber joints
assist in absorbing hard impacts. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle. High Tensile performance spring - STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability and performance. Height Adjustment tools included. Most pieces in our coilover systems, including mounts, collars and spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable and rust resistant components.Warranty: one year warranty for any manufacturing defect
  • Click to be directed to retailers website:

    Buy

    Many items on our site can also be found here:

    Buy
    • External links may include paid for promotion
    Availability: In Stock
    $263

    Product Description

    Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for Honda Accord VIII LX, SE, LX-P sedan CP2 2008-2012 Compatible for Honda Accord VIII LX, SE, LX-P sedan CP3 2008-2012 Compatible for Honda Accord VIII LX, SE, LX-P coupe CS1 (north American only) 2008-2012 Compatible for Honda Accord VIII LX, SE, LX-P CS2 (north American only) 2008-2012 Compatible for Honda Accord VIII LX, SE, LX-P sedan CU1 CU2 CU3 2008-2015 Compatible for Honda Accord VIIITourer 5-door wagon CW1 2008-2015 Compatible for Acura TSX (North America) 2009-2015 Compatible for Accord Euro ( Australia & New Zealand)2008.6-2015.7 Specification Top mounts: Standard rubber top mount front & rear Damping: Not available Shock type: Twin tube Adjustable

    Height:
    Yes lowering 1'' to 3'' Adjustable camber plate: No Spring preload: 7-10 mm Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in)
    Colour: Golden Package includedcomplete coilovers 2 front & 2 rear as shown in the picture Dimension
    Size: 63*51*21 cm Weight: 22.6kg Feature Lowered height adjustment from 1"
    - 3" which allow lower center of gravity & also add a more aggressive stance. Twin-Tube structure allows sufficient stroke within the shock absorber. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle. High Tensile performance spring
    - STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. Height Adjustment tools included. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. Warranty: one year warranty for any manufacturing defect

    Reviews/Comments

    Add New

    Intelligent Comparison

    Oooops!
    We couldn't find anything!
    Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
    Click to bump this page and we'll hurry up.

    Price History

    Vouchers

    No voucher codes found.
    Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

    Facebook

    Jargon Buster

    Honda - The worlds largest manufacturer of engines
    Cm - Centimetres, one centimetre is equal to 10 milimetres
    Warranty - A service provided by the retailer or manufacturer to ensure a device works for a period from new
    Stress - Also known as tension, a situation where a human can not cope with emotional or physical threats
    rubber - Synthetic rubber is any artificial elastomer, usually a polymer, and is used as a substitute for natural rubber.
    rubber - Natural rubber is an elastomer derived from the latex containing sap of some plants.
    vehicle - A manufactured device used to transport people or cargo.
    deliver - The method by which something is delivered fomr one location to another
    weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz
    speed - A measurement of how fast an object travels between two points
    Year - The time it takes the planet earth to orbit the sun. This takes around 365.25 days.
    Components - Multiple items used to complete the product.
    Resistant - Something that can repel against something.
    Warranty - A purchasers guarantee from the manufacturer for replacement/fix of goods when faulty.
    Adjustable - Something that can be changed or slightly modified to fit.
    Treatment - A way in which medics care for patients illnesses. A manner which someone behaves to someone else.
    Twin - A pair of people or animals that are born at the same time.
    Year - 365 days (366 days in a leap year), the time taken for planet earth to make one full revolution around the sun.
    Adjustable - Something that can be changed in order to fit better.
    Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.
    Joints - The sections where one component is joined to another.

    Supplier Information

    Maxpeeding Rods US
    Rev up your engine with Maxpeedingrods (https://www.maxpeedingrods.com/)! Explore a wide selection of high-performance auto parts and accessories at unbeatable prices. From turbochargers and connecting rods to coilovers and camshafts, we've got everything you need to boost your ride's power and style. With top-notch quality and expert engineering, our products are designed to maximize performance and reliability on the road or track. Whether you're a car enthusiast or a professional racer, trust Maxpeedingrods to take your driving experience to the next level. Shop now and unleash the full potential of your vehicle!
    Page Updated: 2026-01-20 12:40:53

    Community Generated Product Tags

    Oh No! The productWIKI community hasn't generated any tags for this product yet!
    Menu