Application This turbo is a universal application turbo, some modification may be required based on individual vehicle. Perfect for all 4.0L-6.0L engine Specification Exhaust Inlet (Turbo Manifold) Flange: T4 Flange Exhaust Outlet (Downpipe) Flange: 3.5 " V-Band Flange Compressor Trim: 49.6 Compressor Inducer Diameter: 69 mm Compressor Exducer Diameter: 98 mm Compressor Air Inlet

Size: 107mm Compressor Air outlet

Size: 86.3mm Compressor A/R: 0.66 Turbine Trim: 77.6 Turbine Inducer Diameter: 88 mm Turbine Exducer Diameter: 77.5 mm Turbine A/R: 1.05 Oil Inlet: M9 & 2*M8*1.25 Oil Outlet: M19 & 2*M8*1.25 Bearing Type: Wet Float Cooling Type: Oil Cooled Wastegate： Without Wastegate Hosepower: Up to 600+HPCondition: Brand New Package

Size: 31x 29x 27 CMPackage Weight: 16480g Feature* Product Material 1. Turbine housing ： Silicon-Molybdenum
- temperature resistant up to 850℃2. Steel Turbine Wheel：K419 alloy
- high oxidation stability & resistanceupto 1000℃3. Compressor housing：ZL104 aluminum with lightweight 4. Compressor wheel/blades： Aluminum blades-precision machining forging & light weight design* Product Performance 1. Cost-effective turbo increase 20-40% power for your car 2. Excellent high temperature resistance，high efficiency & durability 3. Rich experience in turbo production & own factory 4. Quality assurance 5. High-speed oil seal ring 6. Strict quality inspection 7. Improve emissions & save oil* All necessary gaskets included for ease of installation Note* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.* Make sure the oil drain line is lower than the turbo itself.* Ensure exhaust outlet are well sealed by welding* Professional installation is highly recommended (No Instruction Included).* This Turbo is not vehicle specific. Please check the specifications & verify compatibility prior to placing your order. Technology Advantage 1. 100% balancing Test by TURBOTECHNICSVSR3 This Turbocharger you will receive has been balanced using the VSR machine technology. Through the comprehensive & high-precision static & dynamic balance detection technology, & reliability.2. G3-min-Flow VNT Turbo Testing The G3-min-Flow (Air) machine can accurately measure the flow through the VGT turbo & verify that it is set to the OEM factory setting. easily adjust the critical minimum-flow stop to the correct setting before the turbocharger leaves workshop.3. Advanced Actuator Tester/ Programmerelectronic actuator diagnostic with G3-rea-master can rewrite memory in electronic actuators & also allows to modify operation range of the actuator arm, that

Includes:: changing open & close positions of the working angle. Warranty: one year warranty for any manufacturing defect









...

Description Are you trying to put together a cost effective turbocharger system for your vehicle? You should know a turbocharged car has about 20-40% more total power than a non-turbo car of the same year, make & model. Well, Maxpeedingrods universal turbocharger got just what you're looking for. Don't hesitate to get a turbo to boost your car's power. Application This turbo is a universal application street turbo, some modification may be required based on individual vehicle. Perfect for all 4.0L-6.0L engine Horse Power: Capable of boosting horse power up to 600BHPSpecification Exhaust Inlet (Turbo Manifold) Flange: T4 Flange Exhaust Outlet (Downpipe) Flange: 3.25 " Inlet Flange 4.25" Clamp V-Band Compressor Trim: 49.6 Compressor Inducer Diameter: 69 mm Compressor Exducer Diameter: 98 mm Compressor Air Inlet

Size: 107mm Compressor Air outlet

Size: 86.3mm Compressor A/R: 0.66 Turbine Trim: 77.6 Turbine Inducer Diameter: 88 mm Turbine Exducer Diameter: 77.5 mm Turbine A/R: 1.05 Oil Inlet: M9 & 2*M8*1.2...



...

Description Are you trying to put together a cost effective turbocharger system for your vehicle? You should know a turbocharged car has about 20-40% more total power than a non-turbo car of the same year, make & model. Well, Maxpeedingrods universal turbocharger got just what you're looking for. Don't hesitate to get a turbo to boost your car's power. Application This turbo is a universal application street turbo, some modification may be required based on individual vehicle. Perfect for all 4.0L-6.0L engine Horse Power: Capable of boosting horse power up to 600BHPSpecification Exhaust Inlet (Turbo Manifold) Flange: T4 Flange Exhaust Outlet (Downpipe) Flange: V-Band Flange Compressor Trim: 49.6 Compressor Inducer Diameter: 69 mm Compressor Exducer Diameter: 98 mm Compressor Air Inlet

Size: 107mm Compressor Air outlet

Size: 86.3mm Compressor A/R: 0.66 Turbine Trim: 77.6 Turbine Inducer Diameter: 88 mm Turbine Exducer Diameter: 77.5 mm Turbine A/R: 1.05 Bearing Type: Wet Float Cooling Type: Oil Cooled Wastegate:  External Warranty: one year for any manufacture defects Features 1. Turbine housing： Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius.2. Steel Turbine Wheel： Made from the special K418 alloy to achieve high oxidation resistance & stability under high temperatures up to 900 degrees Celsius.3. Compressor housing：ZL104 aluminum.4. Compressor wheel/blades:- Cast Aluminium with good gas tightness & corrosion resistance. Notice* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.* Make sure the oil drain line is lower than the turbo itself.* Gasoline car must install a water cooling device to avoid overheating.* Ensure exhaust outlet are well sealed by welding.* Please check the specifications carefully before buying. If you are not sure about these information, please feel free to contact us.* This is universal application turbo, so modification might be required for some vehicles.* Professional installation is highly recommended (No Instruction Included).



...

Description Are you trying to put together a cost effective turbocharger system for your vehicle? You should know a turbocharged car has about 20-40% more total power than a non-turbo car of the same year, make & model. Well, Maxpeedingrods universal turbocharger got just what you're looking for. Don't hesitate to get a turbo to boost your car's power. Application This turbo is a universal application street turbo, some modification may be required based on individual vehicle. Perfect for all 4.0L-6.0L engine Horse Power: Capable of boosting horse power up to 600BHPSpecification Exhaust Inlet (Turbo Manifold) Flange: T4 Flange Exhaust Outlet (Downspout) Flange: 3.25 " V-Band Flange Compressor Trim: 49.6 Compressor Inducer Diameter: 69 mm Compressor Exducer Diameter: 98 mm Compressor Air Inlet

Size: 107mm Compressor Air outlet

Size: 86.3mm Compressor A/R: 0.66 Turbine Trim: 77.6 Turbine Inducer Diameter: 88 mm Turbine Exducer Diameter: 77.5 mm Turbine A/R: 1.05 Oil Inlet: M9 & 2*M8*1.25 Oil Outlet: M19 & 2*M8*1.25 Bearing Type: Wet Float Cooling Type: Oil Cooled Wastegate:  External Warranty: one year for any manufacture defects Features 1. Turbine housing： Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius.2. Steel Turbine Wheel： Made from the special K418 alloy to achieve high oxidation resistance & stability under high temperatures up to 900 degrees Celsius.3. Compressor housing：ZL104 aluminum.4. Compressor wheel/blades:- Cast Aluminium with good gas tightness & corrosion resistance. Notice* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.* Make sure the oil drain line is lower than the turbo itself.* Ensure exhaust outlet are well sealed by welding.* Please check the specifications carefully before buying. If you are not sure about these information, please feel free to contact us.* This is universal application turbo, so modification might be required for some vehicles.* Professional installation is highly recommended (No Instruction Included).



...

Turbocharger GT45 Anti-surge Twin-Scroll T4 V-Band 1.05 A/R 98mm Turbo Application: This turbo is a universal application turbo, some modification may be required based on individual vehicle. Perfect for all 4.0L-6.0L engine Specification: Exhaust Inlet Flange: T4 Twin Scroll Flange Exhaust Outlet Flange: 3.25 " Inlet Flange 4.25" Clamp V-Band Bearing Type: Wet Float Cooling Type: Oil Cooled Oil Inlet: M9 & 2*M8*1.25 Oil Outlet: M19 & 2*M8*1.25 Wastegate:w/o Wastegate Hosepower: Up to 600+HP Turbo Type: Individual Universal Fitment: Yes Finish: Matte Condition: 100% Brand New Package
Size:30x 30x 27 cm Package Weight: 16400g Compressor: Compressor Trim:49.6 Compressor Inducer Diameter:69 mm Compressor Exducer Diameter:98 mm Compressor Air Inlet

Size: 107mm Compressor Air outlet

Size: 86.3mm Compressor A/R:0.66 Turbine: Turbine Trim:77.6 Turbine Inducer Diameter:88 mm Turbine Exducer Diameter:77.5 mm Turbine A/R:1.05 Product
Material: 1. Turbine housing: Ductile iron QT...





...

Introduction MXR-SLC based on MXR-SNA coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for Honda Accord DX/EX/LX CD5 CD7 1994-1997 compatible for Honda Acura CL YA1 1997-1999 Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Front & Rear top mount: rubber Damping: 24 levels rebound damping adjustable Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 200mm Spring length Rear: 200mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 450mm-490mm Coilover overall length Rear: 525mm-620mm Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold body with black spring Package included Complete coilovers assembly 2 front & 2 rear A pair wrench for height adjustment Dimension Package dimension: 64*52*21 Weight: 23260g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 2. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. 3. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. 4. Twin-Tube structure allows sufficient stroke within the shock absorber. 5. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 6. Separate height adjustment does not affect damper stroke. 7. Height can be adjusted with coilovers installed on the vehicle. 8. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 9. Height Adjustment tools included. 10. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 11. Steel shock bodies with special surface treatment to improve the durability. 12. Full rebuildable.




...

Introduction Maxspeedingrods SP1 lowering Coilover, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles) & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our Coilover are assembled in the dust-free factory, which turns out good quality & long life. Application Compatible for HONDA CIVIC VIII 2-door coupe (FG1/FG2) 2006-2011 Compatible for HONDA CIVIC VIII 4-door sedan (FA1/FA2/FA3/FA4/FA5, North America only) 2006-2011 Compatible for HONDA CIVIC VIII 4-door sedan (FD1/FD2/FD3/FD4/FD6/FD7, International model) 2006-2011 Compatible for Acura CSX 4-door sedan（ Canada）2006-2011 NOTE: Not for the Si / Mugen trim level Specifications Type Lowering kit Shock Type Twin tube Top mount pillow ball top mount with camber plate front Spring Rate Front 7 kg/mm (392 in/lbs) Spring Rate Rear 6 kg/mm (336 lbs/in) Spring pre-load setting 7-10 mm Dampening 24-level rebound dampingadjustable Adjustable height Yes, Height lowering range：1''-3'' Color Black body with blue spring Warranty 1year warrantyforanymanufacturingdefect Feature 1. Lowered height adjustment from 1"
- 3" which allow a lower center of gravity & also add a more aggressive stance. 2. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your Coilover setup. You will experience better ride quality in all road conditions. 3. Front Camber plate top mounts help to eliminate the need for a separate camber kit. 4. Pillow ball top mounts
- It improves the steering feel & response. 5. Full-length dust boot keeps shaft & oil seal from damage. 6. Upgraded damper adjusts knob makes damping setting easier. 7. Upgraded valving for a more smooth ride. 8. Twin-Tube structure allows sufficient stroke within the shock absorber. 9. High-Performance Damping Oil--maintains a stable viscosity in a broad temperature range, which sustains smooth stroke & reliable damping force in a variety of circumstances. 10. High Tensile Performance Spring- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. 11. Decent appearance benefits from CNC machined parts & special surface treatment. 12. Most pieces in our Coilover systems, including mounts, collars & spring perches, are made from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust-resistant components. 13. Complete Suspension Kit of 4 Shock Absorbers 4 Springs for an easy installation. 14. Separate height adjustment does not affect damper stroke & height can be adjusted with coilovers installed on the vehicle. 15. All coilovers were produced & assembled at the dust-free factory which guaranteed the highest quality. Quantity Complete setof 2 front & 2 rear 2 Pieces Front Coilover Shock Absorbers 2 Pieces Rear Coilover Shock Absorbers 2 Pieces Stainless Steel Wrenchfor height adjustment Note * Instruction included; Professional installation alignment suggested. * Please check our store for other auto parts you may be interested in. * Please feel free to contact us for whatever we can help.

...

Application Compatible for PROSTAR 2008+ CAB SHOCKSpecification Interchanges With Following Part Numbers: Replaces For International Navistar /IHC 3595977C96, 3595977C95, 3806428C91, SA66127 Condition: New Placement on Vehicle: Rear left/right Instructions: not included Warranty: one year Quantity: 1 pieces Note- These air suspension are aftermarket ones. They will replace the originalair shock. Please double confim the compatibility as well as the OEM number before purchasing.- Instruction is not included. Professional installation is recommended.- Contact us please for whatever we can help. ...

Application Compatible for PROSTAR 2008+ CAB SHOCKSpecification Interchanges With Following Part Numbers: Replaces For International Navistar /IHC 3595977C96, 3595977C95, 3806428C91, SA66127 Condition: New Placement on Vehicle: Rear left/right Instructions: not included Warranty: one year Quantity: 1 pieces Note- These air suspension are aftermarket ones. They will replace the originalair shock. Please double confim the compatibility as well as the OEM number before purchasing.- Instruction is not included. Professional installation is recommended.- Contact us please for whatever we can help. ...

Application For JDM compatible for Honda Civic CRX D16 ZC SOHC VTEC D Series： for 1986–89 compatible for Acura Integra (USA) for 1986–89 compatible for Acura Integra (Australia) for 1988–1991 compatible for Honda Civic Si, CRX Si for 1990-1991 Civic EX (4dr), Civic Wagon RT4WD for 1988–1991 Civic GTi in New Zealand for 1988–1989 Civic models in Europe (ED4, ED7) for 1995 Civic models in New Zealand (EG4) for 1988–1995 Models in South Africa for 1998–2000compatible for Honda Civic GX for 1996–2000 compatible for Honda Civic HX for 1996 compatible for Honda Civic EX (sedan Peruvian version) for 1996–2000 compatible for Honda Civic VTI for 1992–1995 compatible for Honda Civic Si for 1992–1995 compatible for Honda Civic EX, EX-V for 1992–1995 compatible for Honda Civic ESi (European Market) for 1993–1995 compatible for Honda Del Sol Si (US) for 1993–1996 compatible for Honda Del Sol ESi (European) for 1992-1995 compatible for Honda Civic RTSi for 1996–2000 compatible for Honda Civic EX Coup... ...