Introduction MXR-SNA coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for 2009-2010 Dodge Challenger R/T 5.7L V8 RWD, Coupe; Compatible for 2009-2010 Dodge Challenger SE 3.5L V6 RWD, Coupe; Compatible for 2008-2010 Dodge Challenger SRT8 6.1L V8 RWD, Coupe; Compatible for 2006-2007 Dodge Charger Base 2.7L V6 RWD, Sedan; Compatible for 2007 Dodge Charger Base 2.7L V6 RWD, Sedan; Compatible for 2006 Dodge Charger Daytona R/T 5.7L V8 RWD, Sedan; Compatible for 2006-2010 Dodge Charger R/T 5.7L V8 RWD, Sedan; Compatible for 2006-2010 Dodge Charger SE 2.7L/3.5L V6, 5.7L V8, RWD, Sedan; Compatible for 2006-2010 Dodge Charger SRT8 6.1L V8, RWD, Sedan; Compatible for 2006-2010 Dodge Charger SXT 3.5L V6, RWD, Sedan Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Top mounts: front
- pillow ball top mounts rear
- rubber top mounts Damping: not available Spring rate Front: 12 kg/mm (672 lbs/in) Spring rate Rear: 14 kg/mm (784 lbs/in) Spring length Front: 230mm Spring length Rear: 240mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 510mm-600mm Coilover overall length Rear: 570mm-630mm Shock type: Twin tube Spring preload: 7-10 mm
Colour: gold Package includedcomplete coilovers for 2 front & 2 rear a pair wrench for height adjustment Dimensionweight: 30000g
Size: 71*51*21 cm Feature 1. Lowered height adjustment from 1''-3'' which allow lower center of gravity & also add a more aggressive stance 2. Twin-Tube structure allows sufficient stroke within the shock absorber 3. Separate height adjustment does not affect damper stroke 4. High Tensile performance spring – STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus, the special surface treatment improves the durability & performance. 5. Height adjustment tools included 6. Pillow ball top mount
- It improves the steering feel & response 7. Most pieces in our Coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 8. Full rebuildable






...

Introduction MXR-SLC based on MXR-SNA coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for ACURA TL IIUA5 1999-2003 USA including type scompatible for ACURA CL II YA42001-2003 USAcompatible for HONDA ACCORD VI 4-door sedan CG1 CG5 CG6 1998-2002 USA compatible for HONDA ACCORD VI 2-door coupe CG2 CG31998-2002 USANotice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Front & Rear top mount: rubber Damping: 24 levels rebound damping adjustable spring rate: front 10kg/mm (560 lbs/in) rear 6 kg/mm (336 lbs/in) Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold body with black spring Package included Complete coilovers assembly 2 front & 2 rear A pair wrench for height adjustment Dimension Package dimension: 71*51*21 Weight: 24320g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 2. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. 3. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. 4. Twin-Tube structure allows sufficient stroke within the shock absorber. 5. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 6. Separate height adjustment does not affect damper stroke. 7. Height can be adjusted with coilovers installed on the vehicle. 8. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 9. Height Adjustment tools included. 10. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 11. Steel shock bodies with special surface treatment to improve the durability. 12. Full rebuildable. Note Compatible for Honda Accord 1998-2002 Not for UK manufactured vehicle




...

Application: Compatible for Honda Acura TSX 2004-2008 Specifications: Type: Lowering kit Quantity: Complete setof 2 piece front + 2 pieces rearas shown Damper:24 Levels adjustable damper force Adjustable

Height: Yes, Height lowering range：1''-3'' Adjustable camber plate: No Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Twin Tube Structure Warranty: one year warranty for any manufacturing defect Feature: * Twin-Tube Structure
- for a longer stroke & softer initial response. & will certainly feel much more controlled than OEM. * 24-level rebound dampening levels adjustment -- Adjustments are simple to tune according to your driving style & desired comfort level. * Independent ride height & spring preload adjustments. * Full Length Adjustment-- Lowers The Car Without Ruining Spring Tension, allows drop without sacrifice comfort by shorten pitch distance.（lows the car by twisting the lower bracket instead of compressing the spring) * Pillowball Upper Mounts-- for increased steering response. * Complete Suspension Kit of 4 Shock Absorbers 4 Springs easy installation * Most components are made from 6061 aluminium with T6 for increased hardness -- the advantages include excellent strength, & aluminium helps keep the weight down. * Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve durability & performance. * All inserts come with fitted rubber boots to protect the damper & keep it clean. * Anodized adjustable collars & spring seats for easy adjustment & prolonged cycle life. * A fast & affordable way to easily upgrade your car's appearance. * Ideal for any track, drift & fast road & can also be used for daily driving.



...

Introduction MXR-B3 series (also called MXR-SLC) based on MXR-B2 series (also called MXR-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for Chevrolet Cobalt Base/LS/LT/LTZ/ Sport/SS 2005-2010 Specification Top mounts: Pillow ball top mount with camber plate Adjustable camber plate: Only front Damping: 24 levels rebound damping adjustable Spring rate Front: 7 kg/mm (392 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 200mm Spring length Rear: 160mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 345mm-465mm Coilover overall length Rear: 385mm-420mm Shock type: Twin tube Spring preload: 7-10 mm
Colour: Golden Package includedproduct included: 2 piece front + 2 pieces rear + 2 sway bar end links + 2 spanners + hardwares as pictures show Dimension
Size: 63*51*21 cm Weight: 24.38kg Feature Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. A 24 rebound dampening adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Twin-Tube structure allows sufficient stroke within the shock absorber. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. Height Adjustment tools included. Camber plate top mounts help to eliminate the need for a separate camber kit. Pillow ball top mount
- It improves the steering feel & response. Most pieces in our Coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. Full rebuildable. Warranty: one year warranty for any manufacturing defect






...

Introduction MXR-SLC based on MXR-SNA coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24-level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible For 2009-2010 Dodge Challenger R/T 5.7L V8 RWD, Coupe; Compatible For 2009-2010 Dodge Challenger SE 3.5L V6 RWD, Coupe; Compatible For 2008-2010 Dodge Challenger SRT8 6.1L V8 RWD, Coupe; Compatible For 2006-2007 Dodge Charger Base 2.7L V6 RWD, Sedan; Compatible For 2007 Dodge Charger Base 2.7L V6 RWD, Sedan; Compatible For 2006 Dodge Charger Daytona R/T 5.7L V8 RWD, Sedan; Compatible For 2006-2010 Dodge Charger R/T 5.7L V8 RWD, Sedan; Compatible For 2006-2010 Dodge Charger SE 2.7L/3.5L V6, 5.7L V8, RWD, Sedan; Compatible For 2006-2010 Dodge Charger SRT8 6.1L V8, RWD, Sedan; Compatible For 2006-2010 Dodge Charger SXT 3.5L V6, RWD, Sedan Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Top mounts: front
- pillow ball top mounts rear – rubber top mounts Damping: 24 levels rebound damping adjustable Spring rate Front: 12 kg/mm (672 lbs/in) Spring rate Rear: 14 kg/mm (784 lbs/in) Spring length Front: 230mm Spring length Rear: 240mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 510mm-600mm Coilover overall length Rear: 570mm-630mm Shock type: Twin tube Spring preload: 7-10 mm
Colour: gold Package includedcomplete coilovers for 2 front & 2 rear a pair wrench for height adjustment Dimensionweight: 30800g
Size: 71*51*21 cm Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 2. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. 3. Twin-Tube structure allows sufficient stroke within the shock absorber. 4. Separate height adjustment does not affect damper stroke. 5. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus, the special surface treatment improves the durability & performance. 6. Height Adjustment tools included. 7. Pillow ball top mount
- It improves the steering feel & response. 8. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 9. Full rebuildable.







...

Introduction MXR-B3 series (also called MXR-SLC) based on MXR-B2 series (also called MXR-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for FORD Mustang Base SN95 Convertible/ Coupe 1994-2004 Compatible for FORD Mustang GT SN95 Convertible/ Coupe 1994-2004 Compatible for FORD Mustang SVT SN95 Cobra Convertible/ Coupe 1994-2004 Specification Top mount: Front camber plate Damping: 24 ways damping adjustable Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 230mm Spring length Rear: 180mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 485mm-575mm Coilover overall length Rear: 550mm-600mm Shock type: Twin tube Spring Preload: 7-10 mm
Colour: red body with black spring Package includedfront complete coilover assembly rear springs & spring adjusters & shocks A pair wrench for height adjustment Dimension Package dimension: 71*51*21 Weight: 25540g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 2.24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coilovers system. For a nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff. 3. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent 4. Adjustable Camber Plate & Pillow ball top mount for sharpening steering response. (for some models) 5. CNC machined Aluminumtop mounts & lockers--
- excellent strength, & save weight 6. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable 7. High tensile spring---600, 000 times continuously test to assure it's high tensile strength. 8. All inserts come with fitted long rubber boots--- To protect the damper more well & be durable. 9. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions 10. Corrosion Finish
- Anodized Aluminum & Powder Coated Carbon Steel Parts Warranty: one year warranty for any manufacturing defect





...

Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for FORD Mustang Base SN95 Convertible/ Coupe 1994-2004 Compatible for FORD Mustang GT SN95 Convertible/ Coupe 1994-2004 Specification Top mount: Front camber plate Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 230mm Spring length Rear: 180mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 485mm-575mm Coilover overall length Rear: 550mm-600mm Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold body with black spring Package includedfront complete coilover assembly rear springs & spring adjusters & shocks A pair wrench for height adjustment Dimension Package dimension: 71*51*21 Weight: 25540g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Camber plate top mounts help to eliminate the need for a separate camber kit. 3. Twin-Tube structure allows sufficient stroke within the shock absorber. 4. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 5. Separate height adjustment does not affect damper stroke & height can be adjusted with coilovers installed on the vehicle. 6. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 7. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 8. Steel shock bodies with special surface treatment to improve the durability. 9. full rebuildable Warranty: one year warranty for any manufacturing defect




...

Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for Honda Accord DX/EX/LX CD5 CD7 1994-1997 Compatible for Honda Acura CL YA1 1997-1999 Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Front & Rear top mount: rubber Damping: non-adjustable Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 200mm Spring length Rear: 200mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 450mm-490mm Coilover overall length Rear: 525mm-620mm Shock type: Twin tube Spring Preload: 7-10 mm
Colour: red body with black spring Package included Complete coilovers assembly 2 front & 2 rear A pair wrench for height adjustment Dimension Package dimension: 63*51*21 Weight: 22420g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 2. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. 3. Twin-Tube structure allows sufficient stroke within the shock absorber. 4. Complete Suspension Kit of 4 Shock Absorbers 4 Springs for an easy installation. 5. Separate height adjustment does not affect damper stroke. 6. Height can be adjusted with coilovers installed on the vehicle. 7. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 8. Height Adjustment tools included. 9. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 10. Steel shock bodies with special surface treatment to improve the durability. 11. Full rebuildable. Warranty: one year warranty for any manufacturing defect




...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Honda series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Honda Accord 1998-2002 Compatible for Acura TL 1999-2003 including type s Compatible for Acura CL 2001-2003 Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Product included: complete coilovers 2 front & 2 rearone pair wrench for height adjustment Top mounts: standard rubber top mount front & rear Dampening: 24 levels rebound dampening adjustable Spring rate: Front 10kg/mm (560 lbs/in); Rear 6 kg/mm (392 lbs/in) Adjustable

Height: Yes lowering 1'' to 3'' Shock type: Twin tube Spring Preload: 7-10 mm
Colour: Red Warranty: one year Feature- Able to lower ride height by 1''-3''; allows user to have a more aggressive stance.- Coilovers are 24-way adjustable. Rebound & Dampening adjustment which allows the user the ability to dial in your coilovers to any driving needs. The user can enjoy a comfortable riding experience in all road conditions.- Twin-Tube Shock design is used for low internal frictional resistance in order to increase efficiency & keep shock temps low.- Height adjustment does not sacrifice damper stroke length.- These coilovers are able to have their height adjusted without being taken out of the car.- Most components of the suspension parts are made from 6061-T6 aluminum to increase strength & rigidity.- High Tensile strength performance spring---Tested under a 600, 000 time continuous compression test, the spring distortion was less than 0.04%. Plus, the special surface treatment improves the durability & performance.- Adjustment tools included in the kit. Notice- No instruction included; Professional installation alignment suggested. - Please check our store for other auto parts you may be interested in. - Please feel free to contact us for whatever we can help.



...

Applications: Compatible for HONDA CIVIC VIII 2-door coupe (FG1/FG2) 2006-2011 Compatible for HONDA CIVIC VIII 4-door sedan (FA1/FA2/FA3/FA4/FA5, North America only) 2006-2011 Compatible for HONDA CIVIC VIII 4-door sedan (FD1/FD2/FD3/FD4/FD6/FD7, International model) 2006-2011 Compatible for Acura CSX 4-door sedan（ Canada）2006-2011NOTE: not for the Si / Mugen trim level Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specifications: Quantity: 2 pieces front + 2 pieces rear（ Split rear shock absorber） Front Spring Rate: 7 kg/mm (392 in/lbs) Rear Spring Rate: 6 kg/mm (336 in/lbs)
Colour: Red Damper: 24 ways adjustable damper force Adjustable

Height: YESAdjustable Camber Plate: Yes, with Pillow ball top mount Warranty: one year warranty for any manufacturing defect These Coilovers are " Lowering Kit" & DOES NOT adjust to Factory Ride Height. No drilling, cutting, or modification necessary.SPECIAL NOTES: Prior to installation, verify all hardware & properly tighten. Feature: - Able to lower ride height by 1''-3''; allows user to have a more aggressive stance.- Coilovers are 24-way adjustable. Rebound & Dampening adjustment which allows the user the ability to dial in your coilovers to any driving needs. The user can enjoy a comfortable riding experience in all road conditions.- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response.- Twin-Tube Shock design is used for low internal frictional resistance in order to increase efficiency & keep shock temps low.- Height adjustment does not sacrifice damper stroke length.- These coilovers are able to have their height adjusted without being taken out of the car.- Most components of the suspension parts are made from 6061-T6 aluminum to increase strength & rigidity.- High Tensile strength performance spring---Tested under a 600, 000 time continuous compression test, the spring distortion was less than 0.04%. Plus, the special surface treatment improves the durability & performance.- Adjustment tools included in the kit. Notice： * No instruction included; Professional installation alignment suggested. * Please check our store for other auto parts you may be interested in. * Please feel free to contact us for whatever we can help.


...