More From Contributor

$166
Application Compatible for Yamaha RAPTOR 660R 2001-2005 Specification Including: Carburetor kit Cylinder Piston Piston Rings Wristpin Circlips (2) Head Gasket Base Gasket O-Ring Spark Plug Just as the picture shown Condition: New Accessories: You will get exactly as shown in the picture above. Note Professional installation is highly recommended (No Instruction Included). For any needs please contact us. Warranty: one year warranty for any manufacturing defect ...
Available
$53
Application NEW CARBURETOR FOR 2001-2005 compatible for YAMAHA RAPTOR 660 660R YFM660 YFM 660R CARB compatible for YAMAHA RAPTOR 660 2001-2005 Specification Including: 1x Carburetor. 1x Throttle Base Cover. 1x Throttle Base Rubber Gasket. 1x Throttle Cable Clip. 3x Base Cover Screw. Condition: New Accessories: You will get exactly as shown in the picture above Note Professional installation is highly recommended (No Instruction Included) For any needs please contact us. Warranty: one year warranty for any manufacturing defect ...
Available
$115
Fit For Compatible for Yamaha Grizzly 660 YFM660FH 4x 4 Hardwoods Hunter Edition compatible for Yamaha Grizzly 660 YFM660FHW 4x 4 Wetlands Hunter Edition compatible for Yamaha Grizzly 660 YFM660F 4x 4 compatible for Yamaha Grizzly 660 YFM660FH 4x 4 Hunter Edition compatible for Yamaha Grizzly 660 YFM660FA 4x 4 compatible for Yamaha Grizzly 660 YFM660FG 4x 4 compatible for Yamaha Grizzly 660 YFM660FGH 4x 4 Hunter Edition compatible for Yamaha Grizzly 660 YFM660FG 4x 4 compatible for Yamaha Grizzly 660 YFM660FGH 4x 4 Hunter Edition compatible for Yamaha Grizzly 660 YFM660FA 4x 4 compatible for Yamaha Grizzly 660 YFM660FAH 4x 4 Hardwoods Hunter Edition compatible for Yamaha Grizzly 660 YFM660FAH 4x 4 Outdoorsman Edition compatible for Yamaha Grizzly 660 YFM660FAHD 4x 4 Ducks Unlimited Edition compatible for Yamaha Grizzly 660 YFM660FASE 4x 4 Special Edition compatible for Yamaha Grizzly 660 YFM660FA 4x 4 compatible for Yamaha Grizzly 660 YFM660FAH 4x 4 Hunter Edition compatible for Yamaha... ...
Available
$37.00
Application Compatible for Yamaha Rhino 450 YXR450 2006-2009 Rhino 660 YXR6602004-2007OEMand Part Number 5UG-2580V-02-00, 5UG-2580V-00-00 Specification Place on Vehicle: Rear Diameter & thickness of brake disc:180mm/3.5mm Brake system: for TRWQuantity: Brake Caliper with pads as picture show Reminder: Always inspect rotors for cracks & replace as necessary for longer brake pad life. Note* Hardware included for a complete removal & replacement. Just bolt on, bleed & top off fluid & ride.* Professional installation is highly recommended (No Instruction Included)* For any needs please contact us: Sales US@ Maxpeedingrods.com ...
Archived Product
$279
Application Compatible for RHINO 660 4WD YXR660FA 2004-2007 Compatible for RHINO 660 4WD EXPLORING EDITION YXR660FAEX 2006-2007 Compatible for RHINO 660 4WD HUNTER YXR660FAH 2004-2006 Compatible for RHINO 660 4WD HUNTER YXR66FH 2007 Compatible for RHINO 660 4WD DUCKS UNLIMITED EDITION YXR66FDU 2007 Compatible for RHINO 660 4WD SPORT EDITION YXR66FSP 2007 Manufacturer Part Number 1RB-46101-00-00, 5UG-46101-10-00 Specification 1. New.2. A fully assembled Rear Differential for your Rhino. It does come exactly as it is shown in the picture, & is a fully plug & play application. Feature 1. OE quality, lower price.3. One Year warranty.3. Every gear set is made with the latest gear cutting technology & precise heat treat processes.4. Cast iron covers are manufactured from the finest materials, precision-machined for proper fit.5. Improves rear end life durability, dissipates heat faster.6. Large stock & fast delivery.7. Complete Rear Differential Assembly for Quick & Easy Installation. Notice*... ...
Archived Product
$88.00
Introduction The clutch kit will include all the components necessary, such as the clutch (hub, cover plate, belt, & rivets), flywheel, friction surfaces & pressure plate. The benefits of a clutch kit in a stock ATV include faster acceleration, reduced belt heat, longer belt life & enhanced backshifting. Maxpeedingrods drive clutches are designed to last Approx. 60, 000 miles before they need to be replaced. Maxpeedingrods provides OEM & aftermarket clutch kits compatible for Yamaha series. Our clutch kits will meet all your needs of a driven clutch. Application Compatible for Yamaha YFM 660 2002-2008 compatible for Yamaha RHINO 660 2004
- 2007 compatible for Yamaha Grizzly 660 02-08 Specifications Replaces Part Number: 5KM-16611-10-00, 5KM-17611-00-00, 5KM-16620-00-00, 4SH-16664-00-00, 5KM-15463-00-00 Package Included: 1x Primary Sheave, 1x Clutch Housing, 1x One Way Bearing Condition: New Accessories: You will get exactly as shown in the picture above Warranty: one year warranty for any manufacturing defect Features- A high quality & professional clutch. - High impact, wear resistant that is super durable. - Replace the old broken clutch. - User-friendly controls for easy starting & operation. Notice- No instruction included; Professional installation is highly recommended. - Please check our store for other auto parts you may be interested in. - Please feel free to contact us for whatever we can help.
...
Archived Product
$90
Application Compatible for Yamaha Banshee YFZ350 YFZ 350 Feature- Condition: 100 New - Quantity: 659pcs As the picture shown - Warranty: one year for any manufacturing defect. - Direct replacement. - Easy install & durable use. - Great quality & great Fitment. Note- Professional installation is highly recommended. - For any needs please contact us. ...
Archived Product
$148
About Brake Caliper: The brake caliper fits like a clamp on a wheel’s rotor to stop the wheel from turning when you step on the brakes. Inside each caliper is a pair of metal plates known as brake pads. When you push the brake pedal, brake fluid creates pressure on pistons in the brake caliper, forcing the pads against the brake rotor & slowing your car. Application: Compatible for Honda Element 2003
- 2011 All Engine     OE/ Part number: Front Driver Side  ( Left ): 19B2663, 19-B2663, 19P2663, 19-P2663, 18FR2154, FRC11518, FRC11518N, 45018S9AA01 Front Passenger Side  ( Right ): 19B2662, 19-B2662, 19P2662, 19-P2662, 18FR2153, FRC11517, FRC11517N, SLB19822 Rear Driver Side  ( Left ): 19-B2589, 19B2589, 19-P2589, 19P2589, SLB19725, FRC11124 Rear Driver Side  ( Left ): 19-B2588, 19B2588, 19-P2588, 19P2588, SLB19724, FRC11123       Specification: - Warranty: one year - Condition: 100% brand new, ready to install - Placement On Vehicle: Front Rear Left Right - Inlet Port

Size:
M10 x...


...
Archived Product
$46
Application Compatible for Polaris Ranger 900 Diesel: 2011-2014 compatible for Polaris Ranger 900 Diesel Crew: 2011-2014 compatible for Polaris Ranger XP 800: 2010-2014 compatible for Polaris Ranger XP 800 Crew: 2010-2014 Package included 40 x Small Bushings. 20 x Replacement Sleeves. Feature Replace the worn original bushing kit & improve driving quality. Can alleviate excessive chassis vibration & road noise during driving, & reduce friction between vehicle connecting parts. Suitable for UTV of different years & versions( Please check fitment before your purchase) Made of high-quality material, with better durability & higher strength. Accurate measurement & Computer-aided design for the perfect fit. Easy Installation, No modification required, Use some grease when installing. ...
Archived Product
$259.99
Introduction Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers are designed as an entry-level for street use. It features full-length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for Compatible for Honda Accord VII 4-door sedan CM4/CM5/CM6 2003-2007 Compatible for Honda Accord VII 2-door coupe CM7/CM8 2003-2007 Compatible for Honda Inspire 2003-2007 ( Japan market only) Don't compatible for Acura TL Models Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specifications: Top mounts: Front pillow ball top mounts Damping: Not available Adjustable

Height:
Yes, lowering 1" to 3" Adjustable camber plate: No Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Shock type: Twin tube Spring Preload: 7-10 mm
Colour: Blue
Features: - Able to lower ride height by 1''-3'';...



...
Available

Compatible For Yamaha VStar V Star XVS 1100 XVS1100 Starter Clutch Kit
1999~2009 2001

IntroductionThe clutch kit will include all the components necessary, such as the clutch (hub, cover plate, belt, and rivets), flywheel, friction surfaces and pressure plate. The benefits of a clutch kit in a stock ATV include faster acceleration, reduced belt heat, longer belt life and improved backshifting. Maxpeedingrods drive clutches are designed to last approximately 60, 000 miles before they need to be replaced. Maxpeedingrods provides OEM and aftermarket clutch kits compatible for Yamaha series. Our clutch kits will meet all your needs of a driven clutch. ApplicationCompatible for Yamaha VStar 1100 1999-2009 all models (Custom / Classic / Compatible for Silverado/ Midnight) Drag Star 1100 Classic 2000-2008 Bulldog 1100 SpecificationReplaces Part Number: 5EL-15590-00 Package
Included: 1x Starter Clutch 1x Gears 1x Gasket 1x Copper Needle Roller Bearing 1x Circlip 1x Washer Plate 8x Bolts Hardened and Ground for Durability Improvement Condition:New Warranty: one year warranty for any manufacture defectFeatures- A high quality and professional clutch. - High impact, wear resistant that is super durable. - Replace the old broken clutch. - User-friendly controls for easy starting and operation.Notice- No instruction included; Professional installation is highly recommended. - Please check our store for other auto parts you may be interested in. - Please feel free to contact us for whatever we can help.
RIP - This product is no longer available on our network. It was last seen on 28.02.2024

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • External links may include paid for promotion
Availability: In Stock
$74.00

Product Description

Introduction The clutch kit will include all the components necessary, such as the clutch (hub, cover plate, belt, & rivets), flywheel, friction surfaces & pressure plate. The benefits of a clutch kit in a stock ATV include faster acceleration, reduced belt heat, longer belt life & enhanced backshifting. Maxpeedingrods drive clutches are designed to last Approx. 60, 000 miles before they need to be replaced. Maxpeedingrods provides OEM & aftermarket clutch kits compatible for Yamaha series. Our clutch kits will meet all your needs of a driven clutch. Application Compatible for Yamaha VStar 1100 1999-2009 all models (Custom / Classic / Compatible for Silverado/ Midnight) Drag Star 1100 Classic 2000-2008 Bulldog 1100 Specification Replaces Part Number: 5EL-15590-00 Package Included: 1x Starter Clutch 1x Gears 1x Gasket 1x Copper Needle Roller Bearing 1x Circlip 1x Washer Plate 8x Bolts Hardened & Ground for Durability Improvement Condition: New Warranty: one year warranty for any manufacture defect Features- A high quality & professional clutch. - High impact, wear resistant that is super durable. - Replace the old broken clutch. - User-friendly controls for easy starting & operation. Notice- No instruction included; Professional installation is highly recommended. - Please check our store for other auto parts you may be interested in. - Please feel free to contact us for whatever we can help.

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Copper - A metal element with a chemical formula of CU. A excellent conductor of electricity and heat.
OEM - Original equipment manufacture, unbranded products for the retailer to brand as thei own.
Yamaha - A japanese based manufacturer of Motorbikes, Musical instruments, sports equipment and other electronic devices
Heat - A term used to define thermal energy
Warranty - A service provided by the retailer or manufacturer to ensure a device works for a period from new
star - A giant ball of plasma held together by gravity.
professional - A term used to describe products or people which may be focused on specialist educational training
Year - The time it takes the planet earth to orbit the sun. This takes around 365.25 days.
Quality - An object that has quality is superior in function and finish than a less quality object.
Components - Multiple items used to complete the product.
Condition - The quality of a product or service.
Resistant - Something that can repel against something.
Warranty - A purchasers guarantee from the manufacturer for replacement/fix of goods when faulty.
Professional - A person that is trained within a profession.
Year - 365 days (366 days in a leap year), the time taken for planet earth to make one full revolution around the sun.
Classic - Something that is still like it was originally a high quality standard.

Supplier Information

Maxpeeding Rods US
Rev up your engine with Maxpeedingrods (https://www.maxpeedingrods.com/)! Explore a wide selection of high-performance auto parts and accessories at unbeatable prices. From turbochargers and connecting rods to coilovers and camshafts, we've got everything you need to boost your ride's power and style. With top-notch quality and expert engineering, our products are designed to maximize performance and reliability on the road or track. Whether you're a car enthusiast or a professional racer, trust Maxpeedingrods to take your driving experience to the next level. Shop now and unleash the full potential of your vehicle!
Page Updated: 2026-01-20 12:40:53

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu