Application Compatible for Subaru Impreza WRX 02-07 GDA GDB (WRX Wagon, 2.5RS Models) Compatible for Subaru Impreza WRX STI 04 GDA GDB Compatible for Subaru Legacy 94-98 GDA GDB Compatible for Subaru Forester 03-08 SG Compatible for Subaru Impreza Outback Sport Compatible for Saab 9-2X (2004 2005) Specification Front top mount: Pillow ball with camber plate Camber adjustable: Available Condition: 100% Brand New Quantity: One set with 2 pieces
Colour: Golden Package included 2x Pillow Ball with Camber Plate Top Mounts for Front Feature* Large range of adjustment while still allowing caster & camber to be adjusted from the top without cutting the strut tower
...

Introductionma Xpeedingrods T7 coil-overs are designed for daily street use & Junior track use. It features racing damping oil, an upgraded racing spring, height adjustable, & an adjustable camber plate (applicable for some vehicles), which offers you a lowered stance & enhanced handling. Application Compatible For Impreza WRX sedan/hatchback 2008-2014 Compatible For Impreza WRX Limited sedan/hatchback 2008-2014 Compatible For Impreza WRX Premium sedan/hatchback 2008-2014 Specification Front top mount: pillow ball with camber plate Rear top mount: pillow ball Damping adjustable: Available, 24 levels of rebound damping force Camber adjustable: Available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Spring rate Front: 8 kg/mm (448lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Front spring inner diameter: 70.5 mm Rear spring inner diameter: 70.5 mm Spring length Front: 230 mm Spring length Rear: 180 mm Spring Preload advised: 7-10 mm
Colour: Black body with grey spring Warrant...
...

Introduction Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for SUBARU IMPREZA WRX 2000.08-2007.06 GDA GD9 GGA Compatible for SUBARU IMPREZA WRX STI 2000.10-2004.06 GDB (RIM P.C.D.=100) Compatible for SAAB 9-2X 2005-2007 GGA GGENotice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Top mounts: Pillow ball top mounts Damping: Not available Adjustable

Height: Yes, lowering 1" to 3" Adjustable camber plate: Front only Spring rate Front: 9 kg/mm (504 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Shock type: Twin tube Spring Preload: 7-10 mm
Colour: Red Package includedproduct included: complete coilovers 2 front & 2 rear Dimension
Size: 71*51*21 cm Weight: 29.38 k...



...

Introduction Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for SUBARU IMPREZA WRX 2000.08-2007.06 GDA GD9 GGA Compatible for SUBARU IMPREZA WRX STI 2000.10-2004.06 GDB (RIM P.C.D.=100) Compatible for SAAB 9-2X 2005-2007 GGA GGENotice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Top mounts: Pillow ball top mounts Damping: Not available Adjustable

Height: Yes, lowering 1" to 3" Adjustable camber plate: Front only Spring rate Front: 9 kg/mm (504 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Shock type: Twin tube Spring Preload: 7-10 mm
Colour: Red Package includedproduct included: complete coilovers 2 front & 2 rear Dimension
Size: 71*51*21 cm Weight: 29.38 k...



...

Application Compatible for Subaru Impreza GC8 GC6 1993-2001 Specifications Top mounts: Pillow ball top mounts Quantity: Complete coilovers 2 front & 2 rear as shown in the picture Adjustable damper: 24 levels rebound dampening adjustable Adjustable

Height: Yes lowering 1'' to 3'' Adjustable camber plate: Front only Spring rate front: 10 kg/mm (560 in/lbs) Spring rate rear: 6 kg/mm (336 lbs/in) Spring preload: 7-10 mm Shock type: Twin tube
Colour: Gloden Warranty: 1 year warranty for any manufacturing defect Feature- Pillow ball top mount --- this design helps combat noise while tuning. It also improves the steering feel & response.- Twin-Tube Structure --- For Low Resiliency & Securing Sufficient Stroke.- 24 levels of adjustable damper --- This means that you can perfectly dial in your coilover system for both handling & comfort.- Full Length Adjustment --- separate height adjustment without sacrifice of damper stroke & without removing the coilover out from the car.- High Tensile performance spring --- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.- Most pieces in our Coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components.- Steel shock bodies are electroplated with Zinc for anti Anti-corrosion.- All inserts come with fitted rubber boots to protect the damper & keep clean.- Full rebuildable. Notice- Please double confirm before placing orders.- No instruction included; Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.


...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit compatible for Subaru series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Subaru Impreza WRX GC8 93-01 Don't fit AWD Model Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Quantity: Complete coilovers 2 front & 2 rear as shown in the picture Adjustable damper: No Adjustable

Height: Yes Adjustable camber plate: Front only Front & rear upper mounts: Pillow ball Spring rate front: 10 kg/mm (556 in/lbs) Spring rate rear: 6 kg/mm (336 lbs/in) Spring preload: 7-10 mm Drop Height Front: 1-3 inch Drop Height Rear: 1-3 inch Shock type: Twin tube
Colour: Gloden Warranty: one year warranty for any manufacturing defect Feature- Pillow ball top mount --- this design helps combat noise while tuning. It also improves the steering feel & response. - Twin-Tube Structure --- For Low Resiliency Securing Sufficient Stroke. - Full Length Adjustment --- separate height adjustment without sacrifice of damper stroke without removing the coilover out from the car. - High Tensile performance spring --- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance. - Most pieces in our Coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. - Steel shock bodies are electroplated with Zinc for anti Anti-corrosion. - All inserts come with fitted rubber boots to protect the damper & keep clean. - Full rebuildable. Note- No instruction included; Professional installation is highly recommended. - Please check our store for other auto parts you may be interested in. - Please feel free to contact us for whatever we can help.



...

Introduction Maxpeedingrods-SNA coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for Subaru Imprezaincl. WRX (GC, GF, GFC) 1992.11-2000.08 fit chassis code: GC5, GC6, GC7, GC8/GF5, GF6, GF8 Specification Top mounts: Pillow ball top mounts Damping: Not available Shock type: Twin tube Adjustable

Height: Yes lowering 1'' to 3'' Adjustable camber plate: Front Only Spring preload: 7-10 mm Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in)
Colour: Golden Package includedcomplete coilovers 2 front & 2 rear as shown in the picture Dimension
Size: 63*51*21 cm Weight: 27.28 kg Feature 1. Lowered height adjustment from 1"
- 3" (depends on vehicle models)which allow lower center of gravity & also add a more aggressive stance 2. Adjustable pre-load spring te...




...

Application Compatible for Subaru Impreza WRX 2002-2007 GDA GDB Compatible for Subaru Impreza WRX STI 2004 GDA GDB Compatible for Subaru Impreza WRX Bugeye/ Blobeye Compatible for Subaru Impreza Outback Sport Compatible for Saab 9-2X 2004 2005 Specification Front top mount: Pillow ball with camber plate Camber adjustable: Available Condition: 100% Brand New Quantity: One set with 2 pieces
Colour: Blue Package included 2x Pillow Ball with Camber Plate Top Mounts for Front Feature- Large range of adjustment while still allowing caster & camber to be adjusted from the top without cutting the strut tower
...

Introduction Ma Xpeedingrods COT6 lowering coilover, features 24 clicks adjustable rebound damping, independent ride height & spring tension settings, developed high viscosity index damping oil, 55 Cr Si steel cold-bent springs & decent outlook to provide perfect balance between comfort & performance. This suspension system is ideal for daily driving & occasional, light track use. High quality components are adopted to ensure product durability & stability. Each application is fully test fitted & completely road tested to guarantee all our customers perfect performance & comfort expectations. Application Compatible For Impreza WRX sedan/hatchback 2008-2014 Compatible For Impreza WRX Limited sedan/hatchback 2008-2014 Compatible For Impreza WRX Premium sedan/hatchback 2008-2014 Specifications Front top mounts: camber plates Rear top mounts: pillow ball Damping: 24 ways Adjustable Damper Spring rate Front: 8 kg/mm (448lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 230m... ...

Introduction Ma Xpeedingrods COT6 lowering coilover, features 24 clicks adjustable rebound damping, independent ride height & spring tension settings, developed high viscosity index damping oil, 55 Cr Si steel cold-bent springs & decent outlook to provide perfect balance between comfort & performance. This suspension system is ideal for daily driving & occasional, light track use. High quality components are adopted to ensure product durability & stability. Each application is fully test fitted & completely road tested to guarantee all our customers perfect performance & comfort expectations. Application Compatible For Impreza WRX sedan/hatchback 2008-2014 Compatible For Impreza WRX Limited sedan/hatchback 2008-2014 Compatible For Impreza WRX Premium sedan/hatchback 2008-2014 Specifications Front top mounts: camber plates Rear top mounts: pillow ball Damping: 24 ways Adjustable Damper Spring rate Front: 8 kg/mm (448lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 230m... ...