Application Compatible for Lincoln Mark VIII 1993-1998 Specification Quantity: 2 piece front + 2 pieces rear + 2 Spanners + Hardwares as pictures show Spring rate Front:10kg/mm (560lbs/in) Spring rate Rear: N/A Damper: Non adjustable Damper Adjustable

Height: Yes Adjustable camber plate: No Warranty: one year warranty for any manufacturing defect Feature-Adjustable ride height. -Adjustable pre-load spring tension. -Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response. -Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down. -Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance. -All inserts come with fitted rubber boots to protect the damper & keep clean. -A fast & affordable wa...


...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit compatible for Lincoln series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Lincoln Mark VIII 1993-1998 Specification Quantity: 2 piece front + 2 Spanners Spring rate Front:10kg/mm (560lbs/in) Damper: Non adjustable Damper Adjustable

Height: Yes Adjustable camber plate: No Warranty: one year warranty for any manufacturing defect Feature- Adjustable ride height. - Adjustable pre-load spring tension. - Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steer...


...

Fit for 1993
- 2008 compatible for Ford Crown Victoria All Models 1990
- 1997 compatible for Lincoln Town Car All Models 2003
-


...

Application Compatible for Range Rover EVOQUECompatible for VOLVO:for S602010-2016for S802007-2015for V402012-2016for V702008-2013for XC602010-2013for XC702007-2015OEMand Part Number 7T43-8C609-BA7G91-9A819-AA940.0058.03941.0138.01940.0094.02940.0085.01940.0085.00940.0043.03940.0094.00940.0043.00940.0042.04940.0043.02940.0059.00 Feature Quantity: 1x Cooling Fan Control Unit Module Warranty: one year Note- Instruction is not included. Professional installtion is recommended.- Contact us please for whatever we can help. ...

Application Compatible for Mazda 5 Front Left 2012-2014 compatible for Mazda 6 Front Left / Rear Right 2004-2008 compatible for Mazda CX-7 Front Left / Rear Right 2007-2012 compatible for Mazda CX-9 Front Left / Rear Right 2007-2015 compatible for Mazda RX-8 Front Right 2008-2011 compatible for Mazda 3 Front Left / Rear Right 2004-2009 Specification OEM Number or Interchangeable Part Number: 742-801, GJ6A5958XE, GJ6A5958XF, MA1356101, 617-51177, 680324-G, 6803, , 742801, D6515958XB Description: 1 PC the same as the picture shows (Left/ Driver side) Power Motor ONLY NOT Included: Window Regulator With 6 pin connector Hardwired or Plug-in: Plug-in Note* Professional installation is highly recommended (No Instruction Included) * For any needs please contact us ...

Application Compatible for Mazda 5 Front Passenger's side ONLY 2012-2017 Compatible for Mazda 6 Front Passenger's/ Rear Driver's side ONLY 2006-2007 Compatible for Mazda CX-7 Front Passenger's side ONLY 2007-2012 Compatible for Mazda CX-9 Front Passenger's side ONLY 2007-2015 Compatible for Mazda RX-8 Front Driver's side ONLY 2009-2011 Specification OEM Number or Interchangeable Part Number: G22C5858XF, 742-802, 748-090, 748-094, D01G5858XB, GJ6A5858XC, 617-51176 742802, 748090, 748094, 742 802, 748 090, 748 094 Description: - 1 PC the same as the picture shows (Right/ Passenger side) - Power Motor ONLY - NOT Included: Window Regulator - With 6 pin connector - Hardwired or Plug-in: Plug-in Note* Professional installation is highly recommended (No Instruction Included) * For any needs please contact us Warranty: one year warranty for any manufacturing defect ...

Introduction MXR-SLC based on MXR-SNA coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for Mazda 6 2003-2006 GG 4-door sedan Compatible for Mazda 6 2003-2006 GG 5-door liftback Compatible for Mazda 6 2003-2006 GG 5-door wagon Compatible for Mazdaspeed 6/ Mazda 6 MPS2005-20074-door sedan Specification Top mount: Front pillow ball Damping: 24 ways rebound damping Spring rate Front: 9 kg/mm (504 in/lbs) Spring rate Rear: 9 kg/mm (504 in/lbs) Adjustable

Height: lowering 1-3 inch Shock type: Twin tube Spring Preload: 7-10 mm
Colour:red body with black spring Package includedfront complete coilover assembly rear springs & spring adjusters & shocks A pair wrench for height adjustment Dimension Package dimension: 63*51*21 Weight: 25080g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2.A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. 3. Twin-Tube structure allows sufficient stroke within the shock absorber. 4. Separate height adjustment does not affect damper stroke & height can be adjusted with coilovers installed on the vehicle. 5. Dust boot included to protect damper seal 6. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 7. Most pieces in our coilover systems, including collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 8. Steel shock bodies with special surface treatment to improve the durability. 9. Full rebuildable




...

Introduction Ma Xpeeding Rods-B3 series (also called Ma Xpeeding Rods-SLC) based on Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible For Mazda 6 2003-2006 GG 4-door sedan Compatible For Mazda 6 2003-2006 GG 5-door liftback Compatible For Mazda 6 2003-2006 GG 5-door wagon Compatible For Mazdaspeed 6/ Mazda 6 MPS 2005-2007 4-door sedan Specification Front top mount: Pillow ball Damping adjustable: Available, 24 levels of rebound damping force Camber adjustable: Not available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Shock structure type: twin -tube Spring rate Front: 9 kg/mm (504 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Spring length F... ...

Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Applicationcompatible for Mazda 6 2003-2006 GG 4-door sedan compatible for Mazda 6 2003-2006 GG 5-door liftback compatible for Mazda 6 2003-2006 GG 5-door wagon compatible for Mazdaspeed 6/ Mazda 6 MPS2005-20074-door sedan Specification Top mount: Front pillow ball Damping: not available Spring rate Front: 9 kg/mm (504 in/lbs) Spring rate Rear: 9 kg/mm (504 in/lbs) Adjustable

Height: lowering 1-3 inch Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold body with black spring Package includedfront complete coilover assembly rear springs & spring adjusters & shocks A pair wrench for height adjustment Dimension Package dimension: 63*51*21 Weight: 25160g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Pillow ball top mounts improve the steering feel & response. 3. Twin-Tube structure allows sufficient stroke within the shock absorber. 4. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 5, Separate height adjustment does not affect damper stroke & height can be adjusted with coilovers installed on the vehicle. 6, Steel shock bodies with special surface treatment to improve the durability. 7, Full rebuildable Warranty: one year warranty for any manufacturing defect




...

Introduction Ma Xpeeding Rods-B2 coil-overs are designed as entry-level for street use. It features height adjustable & adjustable camber plates (applicable for some vehicles), which offer you a lowered stance, & enhanced performance for your daily use vehicle. Application Compatible For Mazda 6 2003-2006 GG 4-door sedan Compatible For Mazda 6 2003-2006 GG 5-door liftback Compatible For Mazda 6 2003-2006 GG 5-door wagon Compatible For Mazdaspeed 6/ Mazda 6 MPS2005-20074-door sedan Specification Front top mount: Pillow ball Damping adjustable: Not available Camber adjustable: Not available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Shock structure type: twin -tube Spring rate Front: 9 kg/mm (504 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Spring length Front: 190 mm Spring length Rear: 210 mm Spring Preload advised: 7-10 mm
Colour: Golden body with black spring Package included 2x Front coil-overs 2x Rear coil-overs 1x Allen wrench 2x C spanners Dimension Package dimension: 63*51*21...
...