Introduction This conversion kit convert rear air spring to coil springand Electronic Dampers to passive dampers, which can help you get rid of issues that caused by Automatic Height Control like air leaking from the system, a clogged or weak compressor pump, & the height control sensors. Any one of these faults can leave your compatible for Lexus lowered all the way to the bump stops, raised to the maximum height, or even leaning to one side. Application Compatible for Lexus GX470 2003-2009OE/ Part number 4808035011, 4809035011, 4853069485, 4851069415 Specification Spring Rate Front: 11kg/mm (616 lbs/in) Spring Rate rear: 5kg/mm (280 lbs/in)
Height: OE heightdamper not adjustable Package included 2x Front Assembly Complete Struts 2x Rear Coil Springs 2x Rear Shocks 2 x Resistors Note No instruction included; Professional installation alignment suggested. Please check our store for other auto parts you may be interested in. Please feel free to contact us for whatever we can help. Warranty: one yea...
...

Introductionmax-SLC based on max-SNA coilovers, which is also height adjustable but adds damping adjustment ability by a knob on the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for TOYOTA ALTEZZA AS200 1998.10-2005.07JPN GXE10 Compatible for TOYOTA ALTEZZA RS200 1998.10-2005.07JPNSXE10 Compatible for LEXUS IS300 2000-2005 USA JCE10L （INCL SPORTS CROSS (5DR) ） Compatible for LEXUS IS 200 1999.4
- 2005.7 GXE10（INCL SPORTS CROSS (5DR) ） Compatible for TOYOTA MARK II 2000.10-2004.11 JPN JZX110 GRANDE IR-V, GRANDE G-TB Compatible for TOYOTA MARK II BLIT 2002.01-2007.05JPN JZX110W 2.5IR-V, 2.5IR-S Specification Top mounts: rubber top mounts Damping: 24 levels rebound damping adjustable Spring rate: front 12kg/mm Spring rate: rear 10kg/mm Adjustable

Height: Yes lowering 1'' to 3'' Shock type: Twin tube Spring Preload: 7-10 mm
Colour: red Package includedcomplete coilovers 2 front & 2 rear a pair wrench for height adjustment Dimensionweight: 24940g
Size: 71*51*21 cm Feature 1. Lowered height adjustment from 1''-3'' which allow lower center of gravity & also add a more aggressive stance 2. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. 3. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. 4. Twin-Tube structure allows sufficient stroke within the shock absorber 5. Separate height adjustment does not affect damper stroke 6. High Tensile performance spring – STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 7. Height Adjustment tools included 8. Most pieces in our Coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 9. Full rebuildable Warranty: one year warranty for any manufacturing defect




...

Introductionmax-SLC based on max-SNA coilovers, which is also height adjustable but adds damping adjustment ability by a knob on the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for TOYOTA ALTEZZA AS200 1998.10-2005.07JPN GXE10 Compatible for TOYOTA ALTEZZA RS200 1998.10-2005.07JPNSXE10 Compatible for LEXUS IS300 2000-2005 USA JCE10L （INCL SPORTS CROSS (5DR) ） Compatible for LEXUS IS 200 1999.4
- 2005.7 GXE10（INCL SPORTS CROSS (5DR) ） Compatible for TOYOTA MARK II 2000.10-2004.11 JPN JZX110 GRANDE IR-V, GRANDE G-TB Compatible for TOYOTA MARK II BLIT 2002.01-2007.05JPN JZX110W 2.5IR-V, 2.5IR-S Specification Top mounts: rubber top mounts Damping: 24 levels rebound damping adjustable Spring rate: front 12kg/mm Spring rate: rear 10kg/mm Adjustable

Height: Yes lowering 1'' to 3'' Shock type...


...

Introduction MXR-SNA coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for TOYOTA ALTEZZA AS200 1998.10-2005.07JPN GXE10 Compatible for TOYOTA ALTEZZA RS200 1998.10-2005.07JPNSXE10 Compatible for LEXUS IS300 2000-2005 USA JCE10L （INCL SPORTS CROSS (5DR) ） Compatible for LEXUS IS 200 1999.4
- 2005.7 GXE10（INCL SPORTS CROSS (5DR) ） Compatible for TOYOTA MARK II 2000.10-2004.11 JPN JZX110 GRANDE IR-V, GRANDE G-TB Compatible for TOYOTA MARK II BLIT 2002.01-2007.05JPN JZX110W 2.5IR-V, 2.5IR-S Specification Top mounts: rubber top mounts Damping: not available Spring rate: front 12kg/mm Spring rate: rear 10kg/mm Adjustable

Height: Yes lowering 1'' to 3'' Shock type: Twin tube Spring preload: 7-10 mm
Colour: blue Package includedcomplete coilovers 2 front & 2 rear a pair wrench for height adjustment Dimensionweight: 24940g
Size: 71*51*21 cm Feature 1. Lowered height adjustment from 1''-3'' which allow lower center of gravity & also add a more aggressive stance 2. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. 3. Twin-Tube structure allows sufficient stroke within the shock absorber 4. Separate height adjustment does not affect damper stroke 5. High Tensile performance spring – STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the specialsurface treatment improves the durability & performance. 6. Height Adjustment tools included 7. Most pieces in our Coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 8. Full rebuildable




...

Introductionma Xpeedingrods T6 lowering coil-over, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles), & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coil-overs are assembled in a dust-free factory, which turns out good quality & long life. Application Compatible For Lexus IS250 / IS350 Sedan RWD (XE30) 2014-16 Specifications Damping adjustable: Available, 24 levels of rebound damping force Shock structure type: twin -tube Front top mount structure: Pillow ball Rear top mount structure: Pillow ball Camber adjustable: Not available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Spring Rate Front: 8.5 kg/mm (476lbs/in) Spring Rate Rear: 10 kg/mm (560lbs/in) Spring length Front: 200 mm Spring length Rear: 225 mm Spring Preload advised: 7-1... ...

Introductionma Xpeedingrods T6 lowering coil-over, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles), & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coil-overs are assembled in a dust-free factory, which turns out good quality & long life. Application Compatible For Lexus IS250 IS350 AWD 2006-2013 Specification Front top mount structure: Pillow ball Rear top mount structure: Pillow ball Camber adjustable: Not available Damping adjustable: Available, 24 levels of rebound damping force Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Spring Rate Front: 10 kg/mm (560 lbs/in) Spring Rate Rear: 8 kg/mm (448 lbs/in) Front spring inner diameter: 62 mm Rear spring inner diameter: 62 mm Spring length Front: 180 mm Spring length Rear: 230 mm Shoc... ...

Introductionma Xpeedingrods T7 coil-overs are designed for daily street use & Junior track use. It features racing damping oil, an upgraded racing spring, height adjustable, & an adjustable camber plate (applicable for some vehicles), which offers you a lowered stance & enhanced handling. Application Compatible for Lexus IS250/IS350 (GSE20/21) RWD 2006-2013 compatible for Lexus IS F RWD 2008-2014 compatible for Lexus GS300/GS350 RWD 2007-2011 RWD Only, not fit for AWDSpecification Front & rear top mount: standard rubber Damping adjustable: Available, 24 levels of rebound damping force Camber adjustable: Not available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Spring rate Front: 12kg/mm (672 in/lbs) Spring rate Rear: 10 kg/mm (558 lbs/in) Front spring inner diameter: 70.5 mm Rear spring inner diameter: 70.5 mm Spring length Front: 230 mm Spring length Rear: 230 mm Spring Preload advised: 7-10 mm
Colour: Black body with grey spring Warranty: one year for any manufact...
...

Application Compatible For Lexus IS250/IS350 (GSE20/21) RWD 2006-2013 Compatible For Lexus IS F RWD 2008-2014 Compatible For Lexus GS300/GS350 RWD 2007-2011RWD Only, not fit for AWDSpecification Top mounts: standard rubber top mount front & rear. Damping: 24 levels rebound damping adjustable Front Spring Rate: 12 kg/mm (672 in/lbs). Rear Spring Rate: 9 kg/mm (504 in/lbs). Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: Black body with blue spring Warranty: one year warranty for any manufacturing defect Package includedcomplete coilovers 2 front & 2 rear, a pair wrench for height adjustment Dimension Gross weight: 26.28kg Package

Size: 71*51*21cm Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance.2. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts.3.24 levels of adjustable damper -- This allows yo...





...

Introduction A vehicle's alignment is the most important aspect in regards to handling performance. Naturally, the alignment will fall out of OEM specifications when subjected to road imperfections. Also, lowering a vehicle will bring a car out of OEM alignment

Specification. Majority of OEM suspension components do not have proper toe, camber, or caster adjustments. An unaligned vehicle can cause poor handling characteristics & premature uneven tire wear. Application Compatible for Lexus IS300 2001-2005 Compatible for Lexus GS300 1998-2005 Compatible for Lexus GS400 1998-2000 Compatible for Lexus GS430 2001-2005 Specification 1. Package
Includes:： One pair of rear camber arms (1 left & 1 right). 2.
Material:steel 3.
Colour: Silver 4. Item Weight： 4.85 Lbs 5. Package Dimensions：21.26*3.54*3.54inch 6.surfacefinish: spraying plastics Feature* New in box * This is for one pair of rear camber arms (1 left & 1 right). * These arms are the perfect compliment to any race car, or restoration. * S...




...

Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for Lexus IS 250 / IS350 RWD 2nd Gen. 2006-2013 Compatible for Lexus IS F RWD 2008-2013 Compatible for Lexus GS300/GS350 RWD 2007-2011 Compatible for Lexus GS430 RWD 2006-2007 Note: RWD Only, not fit for AWD Specification Top mounts: standard rubber top mount front & rear. Damping: No adjustable damper force Front Spring Rate: 12kg/mm (672 in/lbs). Rear Spring Rate: 9 kg/mm (504 in/lbs). Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: blue Package includedproduct included: complete coilovers 2 front & 2 rear, a pair wrench for height adjustment. Dimension Gross weight: 23.54kg Package

Size: 63*51*21cm Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. 3. Twin-Tube structure allows sufficient stroke within the shock absorber. 4. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 5. Separate height adjustment does not affect damper stroke. 6. Height can be adjusted with coilovers installed on the vehicle. 7. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 8. Height Adjustment tools included. 9. Full rebuildable. Warranty: one year warranty for any manufacturing defect






...