Note* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage. * Make sure the oil drain line is lower than the turbo itself. * Ensure exhaust outlet are well sealed by welding * The degree of modification of the universal turbo depends on your individual vehicle. Professional installation is highly recommended. * This Turbo is not vehicle specific. Please check the specifications & verify compatibility prior to placing your order. * Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed & eliminated (e.g. insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc.)! * Need modifications
- Professionals ONLY (This is an aftermarket universal turbo kit for DIY purpose, & it's recommended to advanced players but not for beginners. ) Application Universal Turbo Kit Perfect For 1.5L-3.0L engine This Kit Will be able to add 350+HP at 7.5-14.5 PSI. (You will need Turbo Manifold, Modification & other accessories to complete the Turbo Kit Project) * Notice: Please confirm that your vehicle displacement is 1.5L-3L before purchasing. Otherwise, if you buy the wrong one, you will not be able to use it normally. Specification Turbine Side: Exhaust Inlet Flange: T3 T4 4 bolt Flange Patterns Exhaust Outlet pipe Flange: 5 bolt Flange Turbine Trim: 74.2 Turbine Inducer Diameter:64.8 mm Turbine Exducer Diameter: 55.8mm Turbine A/R: 0.63 Compressor Side: Compressor Trim: 48.1 Compressor Inducer Diameter: 52.7mm Compressor Exducer Diameter: 76 mm Compressor A/R: 0.5 Compressor Inlet Diameter: 72mm (2.8") Compressor Outlet Diameter:53mm（2"） Bearing Type: Wet Float Bearing Cooling Type: Oil Cooling Thrust Bearing:270 degree Horsepower: Up to 400HP Oil Inlet: 1/8 NPT Turbo Type: Individual Condition: New Accessories: You will get exactly as shown as picture above Other

Specification in the kit : *1 x Intercooler: Size 27'' x 7'' x 2.5'' inch. Inlet size is 2.5 inch. Support up to 350 hp for this small intercooler size
- tube & fin style. Intercooler core
Size:21*7*2.5 *1 x Universal turbo intercooler piping kit including: 2 x Straight Aluminum Pipe 2 x 45° Aluminum Pipe 2 x 75° Aluminum Pipe 2 x 90° Aluminum Pipe 6 x 2.5" Straight Silicon Hose (Blue) 2 x 2.5" 90 Degree Hose (Blue) 16 x 2.5" Stainless Steel T-Clamp *1 x Type-S Blow Off Valve: 2.5" Inch Type S/ Rs Flange Pipe.25 P Si Boost! *1 x BOV pipe: can install anywhere suitable *1 x 35/38MM Wastegate: 35/38mm External Waste Gate Kit *1 x Turbo Boost Gauge: 2" (52mm) Turbo Boost Meter Gauge. *1 x Turbo Boost Controller: *1 x Turbo Oil Return / Feeding Line Kit: Turbo Oil Feed + Return Drain Line Kit Combo. *1x 5 Bolt pipe: 2.5" t 3/t 4 5-bolt stainless steel TIG welded pipe. pipe length: 13“ Package
Size:94x 46 x 45 cm Package Weight: 24600g Package included 1x Turbocharger 1x Oil Feed / Return Line 1x 35/38mm Wastegate 1x 5 Bolt Turbo pipe 1x Turbo Boost Gauge 1x Turbo Intercooler 1x Tubo Boost Controller 1x Type-S Blow Off Valve (Random Color) 1x BOV Adapter/pipe 1x Turbo Piping Kit 1x Manual 1x Brochure 1x Sticker Feature 1. Turbo charger: * Turbine housing ： Ductile iron QT450-10
- temperature resistant up to 700℃ * Steel turbine wheel：K418 alloy -highoxidation stability & resistanceupto 900℃ * Compressor housing：ZL104 aluminum with lightweight * Compressor wheel/blades： Cast aluminium blades – superior air tightness corrosion resistance * Product Performance Cost-effective turbo increase 20-40% power for your car Rich experience in turbo production & own factory High-Speed oil seal ring & Precision clearance Built for durability & strength * Technology Advantage: 100% balancing Test by TURBOTECHNICSVSR3 G3-min-Flow VNT Turbo testing Advanced Actuator Tester/ Programmer 2. Intercooler * core
Size:21*7*2.5 cools down the turbocharged air efficiently * Lightweight aluminum racing intercooler， * Strong TIG welds will support high PSI levels 3. Boost controller * Can be setup to adjust boost PSI on the fly * Can be adjusted for any PSI level desired * Control your boost with a precise click *

Includes:: complete install kit * Anodized aluminum finish * CNC machined design 4. Intercooler piping kit * made from 6061 aluminum * Lightweight yet strong aluminum piping * High pressure silicone couplersand T-bolt clamps 5. Turbo Oil returen / Feeding line kit * Stainless Steel Braided *

Includes:: complete install kit * It helps circulate oil from the turbo charger to the oil pan. * The kit provides a anodized look * gives a best cooling performance on your turbo & long lasting life. 6. Blow Off Valve Kit * CNC Billet Aluminum Type RS Style Blow off Valve * Easy Mount Piping Set Included For Bolt-On. * Including all necessary hardwares. * easily adjustable to prevent both permature boost leakage & compressor











...

description Application: Compatible for Jeep Cherokee XJ 1984-2001 2WD/4WDNote: DOES Not FIT RHDFor use on models with at least 4.5" of suspension lift. Minor drilling is required. Package
Includes::2x Front Upper Control Arm Brackets 2x Front Lower Control Arm Brackets 2x Brace Brackets (driver & passenger)1x Trackbar 1x Bracket 2x M12*1.5*65 screws 2x Joint spacer Necessary Hardware (As picture shown) Specification:-

Material: Heavy Duty Carbon Steel- Placement on Vehicle: Front- (Track bar) The Center of Heim to the Center Bushing: MAX830mm/ MIN 790mm- Ride

Height: Accommodates 4.5-6.5of Vehicle Lift- Wall thickness. 250"- Outer diameter: 1" Feature:- Adjustable Design: Adjustable track bars allow you to precisely center your axles under your compatible for Jeep. This will improve the ride, comfort, & handling.- Installation: Easy installation, bring maximum ride comfort.- Vehicle Fitment: The Front Adjustable Track Bar is engineered to compatible for Cherokee XJs.- Desi...




...

Application: Compatible for Jeep Cherokee XJ 1984-2001 Note: Not for right hand drive! Package included: - 1x Front Adjustable Track Bar (1.5-4.5 Lift) - 2x Sway Bar End Links & Necessary Hardware (3.5-6 Lift) Specification: -

Material: Carbon Steel - Surface Finish: Powder-coated - Track Bar: Poly Bushing, grease fitting Ball joint - Sway Bar End Link: Heim joint rod end, bolt-on installation - Placement on Vehicle: Front - Length Adjustable Range (Track Bar): MAX:31.73inch / MIN:30.28inch Feature: - Precision CNC machined for perfect fitment - Allows for Installation of Plus Sized Tires - Upgraded Tubular Steel Design With Powder Coating Paint For Long Rust-Free Life - Track Bar: Massive 1.25" outside diameter. Thick 0.25" wall tubing for heavy-duty durability. - Quick disconnect when you want to remove the sway bar, allows for greater articulation off-road Note: - Please double confirm before placing order. - Professional...

...

Application Compatible for Ford F250 2005-2007 4WD compatible for Super Duty Compatible for Ford F250 2005-2007 4WDCompatible for Ford F350 2005-2007 4WD compatible for Super Duty Compatible for Ford F350 2005-2007 4WDSpecification
Colour: Silver Length Adjustabe Range: Accommodates 0''-6'' of Vehicle Lift Weight: 5240g Package Dimension: 105*14*9 cm Warranty: one year warranty for any manufacturing defect Package
Includes:1 x Adjustable Track Bar with bushing (As Picture Shown) Features 100% brand new in box Increased off-road capability Elimination of the death wobble Reduce rollover risk Powder coated adjustable track barheavy duty Poly bushings. Performance Anodized coating protects your kit from even the toughest conditions. Note* Please feel free to contact us for whatever we can help. * Instruction is not included. Professional installation is highly recommended.

...

Application Compatible for Ford F250 2005-2007 4WD Super Duty compatible for Ford F250 2005-2007 4WD compatible for Ford F350 2005-2007 4WD Super Duty compatible for Ford F350 2005-2007 4WDFeatures New in box Increased off-road capability Elimination of the death wobble Reduce rollover risk Powder coated adjustable track bar heavy duty Poly bushings. Performance Anodized coating protects your kit from even the toughest conditions. Warranty: Quantity: 1 x Adjustable Track Bar As Picture Shown Length Adjustabe Range: Accommodates 0''-6'' of Vehicle Lift Note* Please feel free to contact us for whatever we can help. * Instruction is not included. Professional installation is highly recommended. ...

Application Compatible for LEXUS IS250 / IS350 (XE20) 2006-13 compatible for Lexus IS-F 2008-2013 Allow Adjustment +/- 3 Degrees Specification
Material:steel Surface finish:： Powder coated bushing: Polyurethane Placement on Vehicle: Front, Left, Right, Upper Feature 1. Polyurethane Bushings, zert fittings for easy lubrication. Ball joints come with 90-degree zerk fittings. 2. Tubular Module Design With Steel Alloy 3. Allows Camber Adjustment When Lowering Your Car 4. Improve Handling & Increase Lifespan on Tires 5. Power Coat For Anti-Corrosion Finish 6. Camber Range: +/- 3 Degree
...

Introduction These front upper Camber-Arms are adjustable to fine-tune your car's handling when lowering a car, these will eliminate premature tire wear caused by the front wheels riding upon the inside tread only. Due to the design of the front double-wishbone suspension, this upper camber arm/upper control arm features an adjustable ball joint with hardened rubber for the inner pivot points to minimize suspension deflection. Application For 1997-2001 compatible for Honda CRVSpecification
Material: Steel Bushing: Rubber Adjustable -2°- +3° Placement on Vehicle: Left, Right, Front, Upper Kit Parts Included: 2* front upper arms with ball joint preassembled Item Weight：4.5kg Package Dimension: 43*26*12cm Feature Hard Rubber bushings for a more direct feel & driving experience. Easy to access turnbuckle-style adjustment. Can be adjusted without removing from the vehicle. Eliminates Premature Tire Wear while improving handling & stability
...

Introductioncamber kits are made from high-quality materials & craftsmanship to ensure a perfect fit & years of trouble-free use.camber kits give you the adjustment range needed to adjust your camber for your specific needs
- daily driving, drag racing, autocross, or track. Designed to be reliable for everyday use yet strong enough for high-performance race use. Application Compatible for Chrysler 300 Rear Wheel Drive (RWD) 2005-2023， Compatible for Dodge Challenger Rear Wheel Drive (RWD) 2008-2023， Compatible for Dodge Charger Rear Wheel Drive (RWD) 2006-2023， Compatible for Dodge Magnum Rear Wheel Drive (RWD) 2005-2008， Specification Adjustable for +/- 3 degrees Placement on Vehicle: Left, Right, Front, Upper
Material: steel Surface finish:： Powder coated Bushing: rubber Package included: 2* Front Camber Control Arm 12* 2mm thick gaskets Item Weight：6500g Package Dimension: 46.9*46.4*13.3cm Feature Sold as a pair Adjustment Range: +/- 3 degrees Direct fit, bolt-on camber kits Imp...

...

Application Compatible for Honda CRVCR-V1997-2001RD1-RD3 Specification
Material: Steel Bushing: Rubber Adjustable
...

Application: Compatible for Jeep Wrangler JK Unlimited 2007-2010 2WD Compatible for Jeep Wrangler JK Unlimited 2007-2018 4WD Note: not for the 2-door truck Note:for truck installed with 0-6 inches lift kit Package
Includes:: 2* Front Upper Control Arms
Features: * Rubber bushing on the axle side * Compatible for Flex joint design with grease fitting on the frame side * Adjustable Length design for pinion angle adjustment * Powder coated for protection from corrosion & debris * Warranty: one year warranty for any manufacturing defect Note: * Instruction is not included. Professional installation is highly recommended.

...