Introduction If you experience steering wander, death wobble, or alignment issues in your compatible for Dodge Ram. This might help you to cure those problems. If your truck is leveled or lifted, you need to upgrade the track bar. It's Advantages: -Lifted compatible for Jeep Wrangler are recommended to have adjustable track bars -Increased off-road capability -Elimination of the death wobble -Center your axle -Reduce rollover risk Application Compatible for Jeep Cherokee XJ Track Bar 1984-2001 compatible for Jeep Wrangler TJ Track Bar 1997-2006 Note: Not for right hand drive. Specification Condition: 100% Brand New
Material: Steel Bushing: Polyurethane Ball joint: Grease fitting
Colour: Gray Surface Finish: Powder coated finish Placement on Vehicle: Front Length Adjustable Range：MAX:33.46inch/MIN:32.28inch Item Weight：4.45kg Package Dimension: 105.7*13.8*10.3cm Package included:1X Front Adjustable Track Bar Feature* Premium Polyurethane Bushings，zert fittings for easy lubrication * Precision...

...

Introduction The control arms are perpendicular to the axis of the vehicle, in automotive suspension, a control arm is a hinged suspension link between the chassis & the suspension upright or hub that carries the wheel. Control arms allow wheels to move up & down while preventing forward & rearward movement. They are typically equipped with bushings on the frame side of the vehicle & a ball joint on the wheel side of the vehicle that allow compatible for flex & controlled movement according to road conditions & steering input from the driver. Maxpeedingrods provides quality control arms compatible for Dodge Ram series. Application Compatible for Dodge Ram 1500 1994-2012 compatible for Dodge Ram 2500 1994-2012 compatible for Dodge Ram 3500 1994-2012 Note: for vehicles with 0-6 inch lift height Specifications
Material: steel bushing: poly powder-coated finish package included: 2*front upper control arms adjustable length: 420-470mm 2*front lower control armsadjustable length: 450-52...
...

Application Compatible for Jeep Wrangler JL/JLU 2018+ Compatible for Jeep Gladiator JT 2019-present for 2-4 inch lifted vehicle Specifications Length Adjustable Range: 595-665mm
Material: Steel Bushing: Poly Placement on Vehicle: Front, Lower, Left, Right Weight: 9.2 kg Package dimension: 71*19.5*19 cm Feature * 100% brand new in box * Made by high strength steel & durable Powder-Coated Finish * Polyurethane bushing for driving performance & longer service life. * enhanced suspension geometry to reduce bump steer * Improves Front Suspension, Handling, Predictable Response & even Prevents Premature Tire Wearing. * Design for Street, Track or Drift Racing Precise Adjustments with Long Service Life * Perfect for track cars, drift control, street course, off road * Direct bolt-on for OE factory or replacement * Professional Installer is Highly Recommended (No Instruction Included) Package
Includes: 2x Front Lower Adjustable Control Arms Note * Please feel free to...

...

Application Compatible for Jeep Wrangler JL/JLU 2018+ Compatible for Jeep Gladiator JT 2019-present for 2-4 inch lifted vehicle Specifications Length Adjustable Range: 595-665mm
Material: Steel Bushing: Poly Placement on Vehicle: Front, Lower, Left, Right Weight: 9.2 kg Package dimension: 71*19.5*19 cm Feature * 100% brand new in box * Made by high strength steel & durable Powder-Coated Finish * Polyurethane bushing for driving performance & longer service life. * enhanced suspension geometry to reduce bump steer * Improves Front Suspension, Handling, Predictable Response & even Prevents Premature Tire Wearing. * Design for Street, Track or Drift Racing Precise Adjustments with Long Service Life * Perfect for track cars, drift control, street course, off road * Direct bolt-on for OE factory or replacement * Professional Installer is Highly Recommended (No Instruction Included) Package
Includes: 2x Front Lower Adjustable Control Arms Note * Please feel free to...

...

Application Compatible for Honda CRV CR-V 1997-2001 Specification
Material: Steel Bushing: Rubber Adjustable Range: -2°-
...

Introductionthis front pair length adjustable end links are compatible with 2.5"-6" lifted Wrangler JK JKU 2007-2018. with its quick disconnect design, you can delete your sway bar system when you go heavy off-road. Application Compatible for Jeep Wrangler JK/JKU/JL 2007-2021 Specification
Material: Steel
Colour: Gray bushing: spherical bushing eye to eye adjustable length: 210-350mm compatible with 2.5"-6" lifted vehicle powder coated finish to anti-corrosion packaged included: 2* front end links hardware Package dimension: 41*16*11cm Weight: 3.3kg Feature 1. Made by high strength steel & durable Powder-Coated Finish 2. Improves Suspension, Handling, Predictable Response & even Prevents Premature Tire Wearing & reduce bump steer 3. Design for Street, Track or Drift Racing Precise Adjustments with Long Service Life 4. Our control arms are meticulously engineered to deliver top-notch alignment, customizable ride height, & exceptional handling for your vehicle.

...

Application Compatible for Nissan 240SX (S13) Silvia 1989-1994 Compatible for Nissan 300ZX (Z32)1990-1996 (excludes HICAS models) Specifications Placement on Vehicle: Left, Right, Front, Rear Adjustable: Yes Item Weight：11kg Package Dimension:50*38*14cm Warranty:one year warranty Feature New in box Will help your lowered car not only drive better, but your tires will last much longer as well. Camber Kits are designed to be reliable for daily driving yet strong enough for high performance & race use. Corrects camber traction to help prevent uneven tire wear Camber adjustment range: +/- 3 degree Package
Includes: 2x Rear Camber Kit (Right + Left) 2x Rear Lower Traction Control Rods/ Arms (Right + Left) 2x Front Tension Rods (Right+ Left) 2x Rear Lower Toe Control Arms (Right + Left) (As picture shows, please confirm before purchase!) Note * Instruction is not included. Professional installation is highly recommended. Vehicle realignment is recommended after installa...
...

Note* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage. * Make sure the oil drain line is lower than the turbo itself. * Ensure exhaust outlet are well sealed by welding * The degree of modification of the universal turbo depends on your individual vehicle. Professional installation is highly recommended. * This Turbo is not vehicle specific. Please check the specifications & verify compatibility prior to placing your order. * Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed & eliminated (e.g. insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc.)! * Need modifications
- Professionals ONLY (This is an aftermarket universal turbo kit for DIY purpose, & it's recommended to advanced players but not for beginners. ) Application Universal Turbo Kit Perfect For 1.5L-3.0L engine This Kit Will be able to add 350+HP at 7.5-14.5 PSI. (You will need Turbo Manifold, Modification & other accessories to complete the Turbo Kit Project) * Notice: Please confirm that your vehicle displacement is 1.5L-3L before purchasing. Otherwise, if you buy the wrong one, you will not be able to use it normally. Specification Turbine Side: Exhaust Inlet Flange: T3 T4 4 bolt Flange Patterns Exhaust Outlet pipe Flange: 5 bolt Flange Turbine Trim: 74.2 Turbine Inducer Diameter:64.8 mm Turbine Exducer Diameter: 55.8mm Turbine A/R: 0.63 Compressor Side: Compressor Trim: 48.1 Compressor Inducer Diameter: 52.7mm Compressor Exducer Diameter: 76 mm Compressor A/R: 0.5 Compressor Inlet Diameter: 72mm (2.8") Compressor Outlet Diameter:53mm（2"） Bearing Type: Wet Float Bearing Cooling Type: Oil Cooling Thrust Bearing:270 degree Horsepower: Up to 400HP Oil Inlet: 1/8 NPT Turbo Type: Individual Condition: New Accessories: You will get exactly as shown as picture above Other

Specification in the kit : *1 x Intercooler: Size 27'' x 7'' x 2.5'' inch. Inlet size is 2.5 inch. Support up to 350 hp for this small intercooler size
- tube & fin style. Intercooler core
Size:21*7*2.5 *1 x Universal turbo intercooler piping kit including: 2 x Straight Aluminum Pipe 2 x 45° Aluminum Pipe 2 x 75° Aluminum Pipe 2 x 90° Aluminum Pipe 6 x 2.5" Straight Silicon Hose (Blue) 2 x 2.5" 90 Degree Hose (Blue) 16 x 2.5" Stainless Steel T-Clamp *1 x Type-S Blow Off Valve: 2.5" Inch Type S/ Rs Flange Pipe.25 P Si Boost! *1 x BOV pipe: can install anywhere suitable *1 x 35/38MM Wastegate: 35/38mm External Waste Gate Kit *1 x Turbo Boost Gauge: 2" (52mm) Turbo Boost Meter Gauge. *1 x Turbo Boost Controller: *1 x Turbo Oil Return / Feeding Line Kit: Turbo Oil Feed + Return Drain Line Kit Combo. *1x 5 Bolt pipe: 2.5" t 3/t 4 5-bolt stainless steel TIG welded pipe. pipe length: 13“ Package
Size:94x 46 x 45 cm Package Weight: 24600g Package included 1x Turbocharger 1x Oil Feed / Return Line 1x 35/38mm Wastegate 1x 5 Bolt Turbo pipe 1x Turbo Boost Gauge 1x Turbo Intercooler 1x Tubo Boost Controller 1x Type-S Blow Off Valve (Random Color) 1x BOV Adapter/pipe 1x Turbo Piping Kit 1x Manual 1x Brochure 1x Sticker Feature 1. Turbo charger: * Turbine housing ： Ductile iron QT450-10
- temperature resistant up to 700℃ * Steel turbine wheel：K418 alloy -highoxidation stability & resistanceupto 900℃ * Compressor housing：ZL104 aluminum with lightweight * Compressor wheel/blades： Cast aluminium blades – superior air tightness corrosion resistance * Product Performance Cost-effective turbo increase 20-40% power for your car Rich experience in turbo production & own factory High-Speed oil seal ring & Precision clearance Built for durability & strength * Technology Advantage: 100% balancing Test by TURBOTECHNICSVSR3 G3-min-Flow VNT Turbo testing Advanced Actuator Tester/ Programmer 2. Intercooler * core
Size:21*7*2.5 cools down the turbocharged air efficiently * Lightweight aluminum racing intercooler， * Strong TIG welds will support high PSI levels 3. Boost controller * Can be setup to adjust boost PSI on the fly * Can be adjusted for any PSI level desired * Control your boost with a precise click *

Includes:: complete install kit * Anodized aluminum finish * CNC machined design 4. Intercooler piping kit * made from 6061 aluminum * Lightweight yet strong aluminum piping * High pressure silicone couplersand T-bolt clamps 5. Turbo Oil returen / Feeding line kit * Stainless Steel Braided *

Includes:: complete install kit * It helps circulate oil from the turbo charger to the oil pan. * The kit provides a anodized look * gives a best cooling performance on your turbo & long lasting life. 6. Blow Off Valve Kit * CNC Billet Aluminum Type RS Style Blow off Valve * Easy Mount Piping Set Included For Bolt-On. * Including all necessary hardwares. * easily adjustable to prevent both permature boost leakage & compressor











...

description Application: Compatible for Jeep Cherokee XJ 1984-2001 2WD/4WDNote: DOES Not FIT RHDFor use on models with at least 4.5" of suspension lift. Minor drilling is required. Package
Includes::2x Front Upper Control Arm Brackets 2x Front Lower Control Arm Brackets 2x Brace Brackets (driver & passenger)1x Trackbar 1x Bracket 2x M12*1.5*65 screws 2x Joint spacer Necessary Hardware (As picture shown) Specification:-

Material: Heavy Duty Carbon Steel- Placement on Vehicle: Front- (Track bar) The Center of Heim to the Center Bushing: MAX830mm/ MIN 790mm- Ride

Height: Accommodates 4.5-6.5of Vehicle Lift- Wall thickness. 250"- Outer diameter: 1" Feature:- Adjustable Design: Adjustable track bars allow you to precisely center your axles under your compatible for Jeep. This will improve the ride, comfort, & handling.- Installation: Easy installation, bring maximum ride comfort.- Vehicle Fitment: The Front Adjustable Track Bar is engineered to compatible for Cherokee XJs.- Desi...




...

Application: Compatible for Jeep Cherokee XJ 1984-2001 Note: Not for right hand drive! Package included: - 1x Front Adjustable Track Bar (1.5-4.5 Lift) - 2x Sway Bar End Links & Necessary Hardware (3.5-6 Lift) Specification: -

Material: Carbon Steel - Surface Finish: Powder-coated - Track Bar: Poly Bushing, grease fitting Ball joint - Sway Bar End Link: Heim joint rod end, bolt-on installation - Placement on Vehicle: Front - Length Adjustable Range (Track Bar): MAX:31.73inch / MIN:30.28inch Feature: - Precision CNC machined for perfect fitment - Allows for Installation of Plus Sized Tires - Upgraded Tubular Steel Design With Powder Coating Paint For Long Rust-Free Life - Track Bar: Massive 1.25" outside diameter. Thick 0.25" wall tubing for heavy-duty durability. - Quick disconnect when you want to remove the sway bar, allows for greater articulation off-road Note: - Please double confirm before placing order. - Professional...

...