Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Toyota Corolla series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Toyota Corolla E90 E100 E110 AE92 AE101 AE111 1988-1999 Specification Quantity: 4PCS of Coilovers (2 piece front + 2 pieces rear) Adjustable damper: 24 ways adjustable damper force Adjustable camber plate: Yes（front only） Adjustable

Height: Yes (Front 306-396mm; Rear 341-481mm) Spring rate front: 8 kg/mm (448 lbs/in) Spring rate rear: 7 kg/mm (392 lbs/in) Shock type: Twin tube Spring preload: 7-10 mm
Colour: Red Warranty: one year warranty for any manufacturing defect Daily driver, occasional autocross day or occasional track days，equally at home on street & track. For those seeking a lowered stance as well as enhanced handling & response at a high value. Feature- Able to lower ride height by 1''-3''; allows user to have a more aggressive stance.- Coilovers are 24-way adjustable. Rebound & Dampening adjustment which allows the user the ability to dial in your coilovers to any driving needs. The user can enjoy a comfortable riding experience in all road conditions.- Pillow ball top mount --- this design helps combat noise while tuning. It also improves the steering feel & response.- Twin-Tube Shock design is used for low internal frictional resistance in order to increase efficiency & keep shock temps low.- Height adjustment does not sacrifice damper stroke length.- These coilovers are able to have their height adjusted without being taken out of the car.- Most components of the suspension parts are made from 6061-T6 aluminum to increase strength & rigidity.- High Tensile strength performance spring---Tested under a 600, 000 time continuous compression test, the spring distortion was less than 0.04%. Plus, the special surface treatment improves the durability & performance.- Adjustment tools included in the kit. Note- No instruction included; Professional installation alignment suggested.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.



...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Toyota Corolla series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Toyota Corolla E90 E100 E110 AE92 AE101 AE111 1988-1999 Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Quantity: 4PCS of Coilovers (2 piece front + 2 pieces rear) Adjustable damper: 24 ways adjustable damper force Adjustable camber plate: Yes（front only） Adjustable

Height: Yes (Front 306-396mm; Rear 341-481mm) Spring rate front: 8 kg/mm (448 lbs/in) Spring rate r...


...

Introduction MXR-SLC based on MXR-SNA coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for SUBARU IMPREZA WRX 2000.08-2007.06 GDA GD9 GGA compatible for SUBARU IMPREZA WRX STI 2000.10-2004.06 GDB (RIM P.C.D.=100) Compatible for SAAB 9-2X 2005-2007 GGA GGESpecification Top mounts: Pillow ball top mounts Damping: 24 levels rebound damping adjustable Adjustable

Height: Yes, lowering 1" to 3" Adjustable camber plate: Front only Spring rate Front: 9 kg/mm (504 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Shock type: Twin tube Spring Preload: 7-10 mm
Colour: Golden Package includedproduct included: complete coilovers 2 front & 2 rear Dimension
Size: 71*51*21 cm Weight: 29kg Feature Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Pillow ball top mount
- It improves the steering feel & response. Camber plate top mounts help to eliminate the need for a separate camber kit. Twin-Tube structure allows sufficient stroke within the shock absorber. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. Height Adjustment tools included. Full rebuildable.






...

Introduction MXR-SLC based on MXR-SNA coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for SUBARU IMPREZA WRX 2000.08-2007.06 GDA GD9 GGACompatible for SUBARU IMPREZA WRX STI 2000.10-2004.06 GDB (RIM P.C.D.=100) Compatible for SAAB 9-2X 2005-2007 GGA GGENotice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Top mounts: Pillow ball top mounts Damping: 24 levels rebound damping adjustable Adjustable

Height: Yes, lowering 1" to 3" Adjustable camber plate: Front only Spring rate Front: 9 kg/mm (504 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Shock type: Twin tube Spring Preload: 7-10 mm
Colour: Golden Package includedproduct included: complete coilovers 2 fro...


...

Application For 2008-2012 compatible for Honda Accord Specification 1.
Material: 1) Steel 2)front camber：rubber+steel
...

Introduction If you experience steering wander, death wobble, or alignment issues in your compatible for Dodge Ram. This might help you to cure those problems. If your truck is leveled or lifted, you need to upgrade the track bar. It's Advantages:-Lifted compatible for Jeep Wrangler are recommended to have adjustable track bars-Increased off-road capability-Elimination of the death wobble-Center your axle-Reduce rollover risk Application Compatible Compatible for Jeep Cherokee XJ Track Bar 1984-2001 Compatible for Jeep Wrangler TJ Track Bar 1997-2006 Note: Not for right hand drive. Specification Condition: New
Material: Carbon Steel Bushing: Rubber Ball joint: Grease fitting
Colour: Gray Surface Finish: Powder coated finish Placement on Vehicle: Front Length Adjustable Range：MAX:33.46inch / MIN:32.28inch Item Weight：4.56kg Package Dimension: 105*13*8.5cm Package included:1X Front Adjustable Track Bar Feature* Precision CNC machined for perfect fitment* Allows for Installation of Plus Sized Tires* Upgraded Tubular Steel Design With Gold Powder Coating Paint For Long Rust Free Life* Massive 1.25" outside diameter.* Thick 0.25" wall tubing for heavy-duty durability.* Adjustable for proper fit. Note - Please double confirm before placing an order.- No instruction included; Professional installation is highly recommended. Warranty: one year warranty for any manufacturing defect

...

Introduction If you experience steering wander, death wobble, or alignment issues in your compatible for Dodge Ram. This might help you to cure those problems. If your truck is leveled or lifted, you need to upgrade the track bar. It's Advantages: -Lifted compatible for Jeep Wrangler are recommended to have adjustable track bars -Increased off-road capability -Elimination of the death wobble -Center your axle -Reduce rollover risk Application Compatible for Jeep Cherokee XJ Track Bar 1984-2001 compatible for Jeep Wrangler TJ Track Bar 1997-2006 Note: Not for right hand drive. Specification Condition: 100% Brand New
Material: Steel Bushing: Polyurethane Ball joint: Grease fitting
Colour: Gray Surface Finish: Powder coated finish Placement on Vehicle: Front Length Adjustable Range：MAX:33.46inch/MIN:32.28inch Item Weight：4.45kg Package Dimension: 105.7*13.8*10.3cm Package included:1X Front Adjustable Track Bar Feature* Premium Polyurethane Bushings，zert fittings for easy lubrication * Precision...

...

Introduction The control arms are perpendicular to the axis of the vehicle, in automotive suspension, a control arm is a hinged suspension link between the chassis & the suspension upright or hub that carries the wheel. Control arms allow wheels to move up & down while preventing forward & rearward movement. They are typically equipped with bushings on the frame side of the vehicle & a ball joint on the wheel side of the vehicle that allow compatible for flex & controlled movement according to road conditions & steering input from the driver. Maxpeedingrods provides quality control arms compatible for Dodge Ram series. Application Compatible for Dodge Ram 1500 1994-2012 compatible for Dodge Ram 2500 1994-2012 compatible for Dodge Ram 3500 1994-2012 Note: for vehicles with 0-6 inch lift height Specifications
Material: steel bushing: poly powder-coated finish package included: 2*front upper control arms adjustable length: 420-470mm 2*front lower control armsadjustable length: 450-52...
...

Application Compatible for Jeep Wrangler JL/JLU 2018+ Compatible for Jeep Gladiator JT 2019-present for 2-4 inch lifted vehicle Specifications Length Adjustable Range: 595-665mm
Material: Steel Bushing: Poly Placement on Vehicle: Front, Lower, Left, Right Weight: 9.2 kg Package dimension: 71*19.5*19 cm Feature * 100% brand new in box * Made by high strength steel & durable Powder-Coated Finish * Polyurethane bushing for driving performance & longer service life. * enhanced suspension geometry to reduce bump steer * Improves Front Suspension, Handling, Predictable Response & even Prevents Premature Tire Wearing. * Design for Street, Track or Drift Racing Precise Adjustments with Long Service Life * Perfect for track cars, drift control, street course, off road * Direct bolt-on for OE factory or replacement * Professional Installer is Highly Recommended (No Instruction Included) Package
Includes: 2x Front Lower Adjustable Control Arms Note * Please feel free to...

...

Application Compatible for Jeep Wrangler JL/JLU 2018+ Compatible for Jeep Gladiator JT 2019-present for 2-4 inch lifted vehicle Specifications Length Adjustable Range: 595-665mm
Material: Steel Bushing: Poly Placement on Vehicle: Front, Lower, Left, Right Weight: 9.2 kg Package dimension: 71*19.5*19 cm Feature * 100% brand new in box * Made by high strength steel & durable Powder-Coated Finish * Polyurethane bushing for driving performance & longer service life. * enhanced suspension geometry to reduce bump steer * Improves Front Suspension, Handling, Predictable Response & even Prevents Premature Tire Wearing. * Design for Street, Track or Drift Racing Precise Adjustments with Long Service Life * Perfect for track cars, drift control, street course, off road * Direct bolt-on for OE factory or replacement * Professional Installer is Highly Recommended (No Instruction Included) Package
Includes: 2x Front Lower Adjustable Control Arms Note * Please feel free to...

...