Introduction MXR-B3 is based on MXR-B2 coil-overs, which are also height adjustable. They are also made for street use, but the 24-level rebound damping control allows you the ability to perfectly dial in your coil-over setup. You will experience better ride quality in all road conditions. Applicationcompatible for Mazda 6 2003-2006 GG 4-door sedan compatible for Mazda 6 2003-2006 GG 5-door liftback compatible for Mazda 6 2003-2006 GG 5-door wagon compatible for Mazdaspeed 6/ Mazda 6 MPS2005-20074-door sedan Specification Front top mount: Pillow ball Damping adjustable: Available, 24 levels of rebound damping force Camber adjustable: Not available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Shock structure type: twin -tube Spring rate Front: 9 kg/mm (504 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Front spring inner diameter: 70.5 mm Rear spring inner diameter: 70.5 mm Spring length Front: 190 mm Spring length Rear: 210 mm Spring Preload advised: 7-10 mm
Colour: B...
...

Introduction MXR-SLC based on MXR-SNA coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for Mitsubishi Lancer (CX/CY) 2008-2016, except Lancer Evolution compatible for Mitsubishi Outlander Sport (GA) 2011-2020 Specification Top mounts: pillow ball top mount with camber plate front, standard rubber top mount rear. Damping: 24 levels rebound damping adjustable. Front Spring Rate: 9kg/mm (504 lbs/in). Rear Spring Rate: 6 kg/mm (336 in/lbs). Adjustable

Height: Yes lowering 1" to 3". Shock type: Twin tube. Spring Preload: 7-10 mm.
Colour: gold. Package includedproduct included: complete coilovers 2 front & 2 rear, a pair wrench for height adjustment. Dimension Gross weight: 23.8kg Package

Size: 63*51*20cm Feature 1. Lowe...




...

Introduction MXR-B3 is based on MXR-B2 coil-overs, which are also height adjustable. They are also made for street use, but the 24-level rebound damping control allows you the ability to perfectly dial in your coil-over setup. You will experience better ride quality in all road conditions. Application Compatible for Hyundai Genesis Coupe 2010–2016 (North America Models) 2-Door Only Specification Front top mounts: pillow ball with camber plate Rear top mounts: standard rubber Damping adjustable: Available, 24 levels of rebound damping force Shock structure type: twin -tube Camber adjustable: Available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Spring Rate Front: 7 kg/mm (392lbs/in) Spring Rate Rear: 7 kg/mm (392lbs/in) Spring length Front: 200 mm Spring length Rear: 187.5 mm Spring Preload advised: 7-10 mm
Colour: Golden body with black spring Package included Package included：2x Front coil-overs 2x Rear coil-overs 2x C spanners 1x Allen wrench Dimension Package size: 62*50*20 cm W...
...

Introduction MXR-B3 is based on MXR-B2 coil-overs, which are also height adjustable. They are also made for street use, but the 24-level rebound damping control allows you the ability to perfectly dial in your coil-over setup. You will experience better ride quality in all road conditions. Application For Impreza WRX sedan/hatchback 2008-2014 For Impreza WRX Limitedsedan/hatchback 2008-2014 For Impreza WRX Premiumsedan/hatchback 2008-2014 Specification Front top mount: Pillow ball with camber plate Rear top mount: Pillow ball Damping adjustable: Available, 24 levels of rebound damping force Camber adjustable: Available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Spring rate Front: 8 kg/mm (448lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Front spring inner diameter: 62 mm Rear spring inner diameter: 62 mm Spring length Front: 230 mm Spring length Rear: 180 mm Spring Preload advised: 7-10 mm
Colour: Red body with black spring Package included Package included：2x Front coil-over...
...

Introduction Maxpeedingrods-B3 is based on Maxpeedingrods-B2 coil-overs, which are also height adjustable. They are also made for street use, but the 24-level rebound damping control allows you the ability to perfectly dial in your coil-over setup. You will experience better ride quality in all road conditions. Application Compatible for Mitsubishi Eclipse (3rd-Gen) D53A/D52A 2000-2005 Specification Front top mount: Pillow ball with camber plate Rear top mount: standard rubber Damping adjustable: Available, 24 levels of rebound damping force Camber adjustable: Available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Front Spring Rate: 10 kg/mm (556 lbs/in) Rear Spring Rate:7 kg/mm (392 lbs/in) Spring length Front: 200mm Spring length Rear: 200mm Spring Preload advised: 7-10 mm
Colour: Red body with black spring Package included Package included： 2 x Front coil-overs 2 x Rear coil-overs 1 x Allen wrench 2 x C spanners Dimension Package

Size: 64*51*20 cm Weight: 26150 g...


...

Maxpeedingrods street coilovers are designed & developed for all motoring enthusiasts that want excellent handling without sacrificing comfort. This suspension system is ideal for daily driving & occasional, light track use. High quality components are adopted to ensure product durability & stability. Each application is fully test fitted & completely road tested to guarantee all our customers perfect performance & comfort expectations. Features 24 Clicks of Adjustment – With 24 clicks of rebound damping, you can now optimize your vehicle’s performance! With a wide setting capability, adapt from the roads, to off road, street or highways. Adjustable Height – Easily adjust the height of your ride! This coilover also allows for height & preload adjustments. This means you can reach optimal suspension tuning while maintaining a stable, comfortable ride at all times. Advanced Twin-Tube Technology – The use of base valve enables to keep gas p... ...

Features Ride Height Adjustable
- Drops From 1 to 3 Inch From Factory Ride Height Damping Force Adjustable
- 24 Levels

...

Features - 24 levels of dampening adjustability. - Fully height adjustable via the lower mount with no need to change preload & sacrifice shock stroke. - Cold-bent springs made from high strength 55 Cr Si steel. - Manufactured from high quality T-6061 billet aluminum with an anodized finish for superior strength & corrosion protection. - Lower bracket height adjustability prevent the need to adjust the spring perch, offering the maximum shock-absorbing travel. - Powder painted steel lower bracket can match all design of brake line & ABS line holder, easy for intalling. - Quality Assured
- Full Year Limited Warranty From Date of Purchase. - Fully Rebuildable With All Parts Available. Application Compatible for Lexus GS300 1998-2005 Compatible for Lexus GS400 1998-2000 Compatible for Lexus GS430 2001-2005 Specifications - Damper: 24 Clicks of Rebound Damping Force Adjustment - Spring Rate Front: 12kg/mm (672lbs/in) - Spring Rate Rear: 10kg/mm (560lbs/in) - Spring length...
...

Applications Compatible for Ford Expedition 2003
- 2006 All Models Compatible for Lincoln Navigator 2003
- 2006 All Models

...

Ma Xpeedingrods is a leading manufacturer of high-quality Auto parts since 2006. The company has providing enhanced technology & outstanding performance solutions for domestic passenger cars, SUVs, trucks. Ma Xpeedingrods offers a wide range of revolutionary products. Ma Xpeedingrods COT6 lowering coilover, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles) & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coilover are assembled in dust-free factory, which turns out good quality & long life. Applications Compatible for SUBARU IMPREZA WRX 2000.08-2007.06 GDA GD9 GGA Compatible for SUBARU IMPREZA WRX STI 2000.10-2004.06 GDB (RIM P.C.D.=100) Compatible for SAAB 9-2X 2005-2007 GGA GGE Specifications - Brand: Ma Xpeedingrods - Condition: New - Warranty: one year - Top mounts: Pillow ball top mounts - Adjustable camber plate: Front only - Damping: 24 levels rebound damping adjustable - Adjustable

Height: Yes, lowering 1" to 3" - Front coilover length: 410mm-500mm - Rear coilover length: 600mm-670mm - Spring rate Front: 9 kg/mm (504 lbs/in) - Spring rate Rear: 7 kg/mm (392 lbs/in) - Spring length front: 190mm - Spring length rear: 220mm - Shock type: Twin tube - Spring Preload: 7-10 mm -
Colour: Black body with blue spring Features 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 2. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent 3. Adjustable Camber Plate & Pillow ball top mount for sharpening steering response. 4. 24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coilovers system. For a nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff. 5. CNC machined Aluminum top mounts & lockers--
- excellent strength, & save weight 6. Heavy Duty Steel Lower Mounts--- Highly Durable Reliable 7. Upgraded spring --- more than 600, 000 times continuously test to assure it's high tensile strength. 8. All inserts come with fitted long rubber boots--- To protect the damper more well & be durable. 9. With better damping setting, you will get better performance & comfort at the same time. 10. Twin-Tube structure ---provides excellent handling control characteristics for most driving conditions 11. Corrosion Finish
- Anodized Aluminum & Powder Coated Carbon Steel Parts 12. Test for the best---Every parts were tested on our professional machine before assembled & tested by our professional racers on road. 13. Clean room assembled---maintain higher level of accuracy & reliability. 14. Upgraded damper oil---make damping more stable & smooth in wide temperature range. Package included - Complete coilovers for 2 front & 2 rear - A pair of wrenches for height adjustment - Installation Instructions





...