Application Compatible for Jeep Wrangler JK 2007-2018 Specification Tire Fitment:17"
- 35x 12.5r 1718"
- 315/70r 1820"
-


...

Application Compatible for Ford Ranger 2019 4WDFeature Lift Hight: 2.5in Spacer Hight: 1.5in Tire Fitment: Fit Factory Tire: 265/70R17, 255/75R17, 265/65R18 Fit Aftermarket Tire: must have a minimum of 93.1mm center bore & maximum 6.5" back spacing Will require minor trimming on 285/55R20 on 20x 9 Tires Will require minor trimming on tires less than 6.5" backspacing or 9" wide tire. Notice Professiona installaitonis recommened, No Instruction included. Please do not hesitate to contact us for anything we can help Warranty: one year warranty for any manufacturing defect ...

Application Compatible for Jeep wrangler JL 2WD 4WD 2018-2022 Specification Package
Includes:: Shock Extensions Coil
...

Application : Compatible for Jeep Wrangler JL 2WD 4WD 2018-2023
Features: Lift

Height:


...

Application Perfect for All Turbo DIY Project INTERCOOLER PIPING PIPE KIT 2.5" Destinated for ALL motors, ALL years, ALL architecture vehicle. Those pipes in aluminium allow you to easily connect your intercooler from the bumper to the engine.. Packag included 2x 90 Degree Aluminum Pipe 2.5"2x Straight aluminum pipe 2.5"2x 135 Degree Aluminum Pipe×2 2.5"2x U Aluminum Pipe×2 2.5"6x Straight Silicon Hose 2.5" (Blue )2x 90 Degree Silicone Hose×2 2.5" (Blue )16x Clamps 2.5" Specification Pipe Thickness: 1.8mm Pipe length: 18''U Pipe distance：150mm Accessories: You will get exactly as shown in the picture above Condition: New Warranty: one year warranty for any manufacturing defect Feature 1. New Never been tried or installed.2. High quality of 6061 Lightweight Aluminum Piping. Polished surface well protected cosmetic surface appearance. Rolled up end to prevent silicon hoses slip off. Beaded ends: beaded ends available, very convenient for assembly or welding process.3. Hoses are made from Premium Quality Si... ...

Description: The suspension lift kit is a modification done to an 4WD to raise the overall height & obtain extra inches of ground clearance. This helps the vehicles off-road performance by avoiding the obstacles that can be found on the ground. Fitment: Compatible for Ford F-150 2WD 2004-2008 Compatible for Ford F-150 4WD 2004-2008 Note: Does NOT fit 2004 Heritage models Feature: • High-pressure Nitrogen charged shocks offer a fantastic blend of off-road action & smooth highway ride quality. • Chrome hardened 18mm mandrel • Give your Car the Offroad of Performance, Protection, Specification: Lift

Height: 2.5" Placement on Vehicle: Lower Install Time: 2
- 3 hours Recommended tire

Size: 35x 12.50 Wheel BS: Factory Package
Includes:: Front: Strut extensions Hardware Rear: 1" lift blocks U-bolts Hardware Shocks: (2) Rear shocks Just as Picture Showed Warranty: one year warranty for any manufacturing defect





...

Applications for Universal fits all Turbo Projects Feature 100% brand new Never been tried or installed 100% quality assurance tested Made out of high quality of 6061 aluminum Manual polishing finished Description Pipe Thickness: 1/16 inch / 1.58 mm Pipe length: 18'' Condition Brand New Package
Includes:2 x 90 Degree 2.5" Pipes 2 x 75 Degree 2.5" Pipes 2 x 45 Degree 2.5" Pipes 2 x Straight 2.5" Pipes 16 x T-Bolt Clamps 2 x Elbow Hoses 6 x Straight Hoses Important Notice This 8pcs Universal Aluminum Tube Set is mainly used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite & admission line. made from high quality aluminum material, durable & strong in use. Its surface carried on the polish & extension processing. Professional installation is highly recommended (No Instruction Included) For any needs please contact us
...

Application Compatible for Jeep Grand Cherokee WK2 2WD/4WD2011-2022 Note: Does not fit models with Air-Ride Suspension/ Quadra-Lift Air Suspension Does NOT fit WL75 models. Specificationtype: lift & leveling spacer kit lift

Height: Front 2.5", rear 0.5" around
Material: High Tensile Strength Carbon Steel Finish: Powder coated Spacer thickness: Front 39 mm/1.54 inch; Rear 13 mm/ 0.51 inch Package included 2 x Front Strut top Spacers 2 x Front Strut Spring Pre-load spacer 2 x Rear Coil Spacers (bottom end) 2 x Rear Shock Spacers (top end) 2x coil spacer retainers Necessary hardware package dimension:27cm x 19cm x 10cm / 10.63 inch x 7.48 inch x 3.94 inch weight: 7.16 kg/15.79 Lb Feature High Tensile Strength Carbon Steel for optimal durability & fitment. Powder coated surface：provides superior corrosion resistance. Improve the appearance of your vehicle & accommodate larger tire & wheel setups. Increase ground clearance to level the front with the rear of the vehicle Maintain factory rid...


...

Description: Transform your Car with our popular 2.5" suspension lift & make wheels & tires bigger! This easy-to-install suspension lift features everything you need to gain increased ground clearance & a killer new look. This kit features a set of lifted front & rear coil springs to offer a taller profile & fantastic off-road ability. These coil springs are factory-tuned to the OE spring rate to offer a factory-like ride quality. This kit also features a set of Our Shocks. These 10-stage variable valving, high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action & smooth highway ride quality. With a durable 18mm spring-loaded piston rod & faster-cooling 54mm shock body, this shock offers up to 36k N Tensile Strength for a long lifespan of impressive vibration dampening. Features natural rubber bushings & an eye-catching metallic silver paint. Fitment: Compatible for Jeep Wrangler JK Unlimited 2WD 2007-2010 Compatible for Jeep Wrangler JK Unlimi... ...

Applicationfor 1997
- 2004 compatible for Toyota Tacoma RWD for 1995
- 2004 compatible for Toyota Tacoma 4WD Note: Does NOT

...