More From Contributor

$84
Please be very careful to check our photos, please confrim the manifold is correct for you before order. Thanks. Fitment: Compatible for Silverado 1500 1999-2013 Compatible for Silverado 1500 HD 2001-2006 Compatible for GMC Sierra 1500 1999-2013 Compatible for GMC Sierra 1500 HD 2001-2006 For Avalanche 1500 2002-2006 Fit Engine: 4.8/5.3/5.7/6.0/6.2 V8
Material:cast iron Specifications: 1. T4 flange 2. 2.5" Exhaust V-band outlet Placement on Vehicle: Left
Features: *100% Brand New *1 Year warranty * Professional Installer is Highly Recommended (No Instruction Included) Including: As Shown in the Picture Above

...
Archived Product
$74
Application Compatible For Jeep Wrangler JK 2007-2018 Specification Placement: Left, Right, Front, Rear Install time :2
- 3
...
Available
$118
Application: Compatible for Jeep Liberty KK 2008-2013 Compatible for Dodge Nitro 2007-2012 Specification: Install Time: 2-3 hours Wheels/ Tires: 265/70 R16 16x 8 Factory Offset 245/75 R16 16x 8 Factory Offset Lift

Height:
2.5" Front + 2" Rear Item Thickness: Front 2.17"/ 55 mm; Rear 2.01"/ 51 mm Finish: Powder coated Note: Spacer thickness to lift height is not a 1:1 ratio Feature: High Tensile Strength Carbon Steel for optimal durability & fitment. Powder coated surface:provides superior corrosion resistance. Improve the appearance of your vehicle & accommodate larger tire & wheel setups. Increase ground clearance to level the front with the rear of the vehicle. Package
Includes:: 2x Front Strut Extensions 2x Rear Coil Spring Spacers Hardware Package:36 cm x 29 cm x 17 cm/14.17 inch x 11.42 inch x 6.69 inch Weight: 7.6 Kg/ 16.76 Lb


...
Archived Product
$126
Application Compatible for Ford F-250 Super Duty (Only 4WD) 2011-2022 Compatible for Ford F-350 Super Duty (Only 4WD) 2011-2022 Compatible for Ford F-450 Super Duty (Only 4WD) 2011-2022 Notice: Only provide a near-level stance on trucks with the factory 3" rear block. Some may measure 0.5'' less than true level. Specification Lift

Height:
2.5'' front Tire Fitment: 35" maximum 17"
- 35x 12.5r 1718"
- 315/70r 1820"
- 295/65r 20, 325/60r 2022"
- 35x 12.5r 2235x 12.50 for no rub on a 9" wide wheel with +25 offset Feature CNC precision machining, precise hole position provides easier installation Galvanized hardware can prevent corrosion & rust The coil spacers with track bar brackets are made from durable steel, covered with black powder coating to prevent rust & corrosion Package
Includes: 2x Front Coil Spring Spacers 2x Rubber Spring Spacers 1x Track Bar Relocation Bracket 2x Sound Isolators 2x Shocks Extensions 2x Sway Bar Spacers All Needed Hard...






...
Available
$123
Application Compatible for Ford F-250 Super Duty (Only 4WD) 2011-2022 Compatible for Ford F-350 Super Duty (Only 4WD) 2011-2022 Compatible for Ford F-450 Super Duty (Only 4WD) 2011-2022 Notice: Only provide a near-level stance on trucks with the factory 3" rear block. Some may measure 0.5'' less than true level. Specification Lift

Height:
2.5'' front Tire Fitment: 35" maximum 17"
- 35x 12.5r 1718"
- 315/70r 1820"
- 295/65r 20, 325/60r 2022"
- 35x 12.5r 2235x 12.50 for no rub on a 9" wide wheel with +25 offset Feature CNC precision machining, precise hole position provides easier installation Galvanized hardware can prevent corrosion & rust The coil spacers with track bar brackets are made from durable steel, covered with black powder coating to prevent rust & corrosion Package
Includes: 2x Front Coil Spring Spacers 2x Rubber Spring Spacers 1x Track Bar Relocation Bracket 2x Sound Isolators 2x Shocks Extensions 2x Sway Bar Spacers All Needed Hard...






...
Available
$132
Application Compatible for Toyota Tundra 2022+ 2WD 4WDSpecificationproduct type: Leveling lift kit lift

Height:


...
Archived Product
$143
Application Compatible for Toyota Tundra 2022+ 2WD 4WDSpecificationproduct type: Leveling lift kit lift

Height:


...
Archived Product
$177
Application: Compatible for Acura Integra 1994-2001 all model Compatible for Honda Civic 1992-2000 all models Compatible for Honda Del Sol 1993-1997 all models Specification of Intercooler :
Material: Aluminum Design: Bar & Plate Inlet / Outlet Diameter: 2.5 Core

Size:
21.6" (L) x 7.2" (W) x 2.5" (H) Full

Size:
27.5 (L) x 7.2 (W) x 2.5 (H) Compress air flow rate: 700cubic feet/min. Pressure drop: 0.2-0.5 at 15PSI, 2-5 at 35PSI.
Features: 1. Helps Reducing Engine Inlet Temperature. 2. The fin pitch of the intercooler is small, the cooling-fins are closely distributed, & the heat dissipation efficiency is high. 3. Bar & Plate design aluminum intercooler, support up to 400HP & 35PSI. 4. Allow More Horsepower at the Same Boost Level & Even More Power at the Higher Boost Level. 5. Pipe kit comes with high quality silicone couplers & T-bolt clamps, direct bolt-On design. Condition:100% Brand New Warranty:1 Year for any manufacturin...





...
Archived Product
$69.00
Application Compatible for Dodge Ram 1500 4WD 2009-2019 Does NOT fit 2WD or Mega cab model Does Not Fit Factory Air Suspension Models



...
Archived Product
$73
Application Compatible for Dodge Ram 1500 4WD 2009-2019 Does NOT fit 2WD or Mega cab model Does Not Fit Factory Air Suspension Models



...
Archived Product

2.5 Front Leveling Lift Spacer Kit Compatible For Ford F150 2WD 4WD
2004-2023

Introduction: This front leveling kit will add a true 2.5" height to the front end and match the rear height. Offer a more aggressive and better-looking truck. Fitment: Compatible for Ford F-150 2WD 4WD 2004-2024 Compatible for Ford Expedition 2WD 4WD 2003-2018 Compatible for Lincoln Mark LT 2005-2008 Note: Does not compatible for Ford Raptor Will not fit for Heritage Models 2004 Will not compatible for Ford Expedition Platinum trim or Models equipped with CCD independent or auto-ride suspension Specification: Type: Leveling kit Material: CNC machined Aluminum Lift Height: 2.5 inch Spacer Thickness: 42mm Tire Size: 33s Install time: 2 hours; bolt-on installation Note: Lift spacer thickness and lift is not a 1-to-1 ratio due to the suspension
geometry. Package Include: 2x front lift spacers Install hardware Package dimension: 17.5*17.12cm Weight: 2880g
RIP - This product is no longer available on our network. It was last seen on 20.01.2026

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • External links may include paid for promotion
Availability: In Stock
$45.99

Product Description

Introduction: This front leveling kit will add a true 2.5" height to the front end & match the rear height. Offer a more aggressive & better-looking truck. Fitment: Compatible for Ford F-150 2WD 4WD 2004-2024 Compatible for Ford Expedition 2WD 4WD 2003-2018 Compatible for Lincoln Mark LT 2005-2008 Note: Does not compatible for Ford Raptor Will not fit for Heritage Models 2004 Will not compatible for Ford Expedition Platinum trim or Models equipped with CCD independent or auto-ride suspension Specification: Type: Leveling kit
Material: CNC machined Aluminum Lift

Height:
2.5 inch Spacer Thickness: 42mm Tire

Size:
33s Install time: 2 hours; bolt-on installation Note: Lift spacer thickness & lift is not a 1-to-1 ratio due to the suspension geometry. Package Include: 2x front lift spacers Install hardware Package dimension: 17.5*17.12cm Weight: 2880g

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Inch - Equivalent to approximately 2.5cm
weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz
Size - is the measurement of how big an object is in space.
Specification - A description of a product with the details of its attributes.
Install - A process of putting materials together to create a finished product.
Dimension - The shape or measurements of something.

Supplier Information

Maxpeeding Rods US
Rev up your engine with Maxpeedingrods (https://www.maxpeedingrods.com/)! Explore a wide selection of high-performance auto parts and accessories at unbeatable prices. From turbochargers and connecting rods to coilovers and camshafts, we've got everything you need to boost your ride's power and style. With top-notch quality and expert engineering, our products are designed to maximize performance and reliability on the road or track. Whether you're a car enthusiast or a professional racer, trust Maxpeedingrods to take your driving experience to the next level. Shop now and unleash the full potential of your vehicle!
Page Updated: 2026-01-20 12:40:53

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu