Material: Plastic + Alloy Model Number: HKCLL469B000 Product weight: 6000g Product
Size: 21.6*28*13.1cm 8.64*11.2*5.24 inches) Product package size 28.5*15.4*25.5cm 11.4*6.16*10.2inches Maximum cutting size Die size within 280*150mm 11.2*6 inches
Colour: Pink Cut paper thickness 80-250g Package Included:?1 X?A? Plastic Cushion Plates 1 X B Plastic Cushion Plates 1?X? Translucent board 1 X Manual? About product Excellent quality embosser & die cut machine with a built in suction system, sturdy & durable. Works well with any standard Wafer thin/etched dies, embossing folders, texture plates, & contour steel rule dies. Cuts & embosses lots of materials including tissue paper, foils, acetate ribbon, thin leather, & more.4 Suction Cups-4 suction cups on the bottom will help the machine stick firmly to a smooth work surface. Fault handling The knurling machine must be placed on a flat workbench; the knurling operation can only be performed after the standby unit is stable. Maximum knurled size In theory, it is possible to cut patterns that are less than or equal to the length & width of the backplane Applicable knife type Refer to the thickness (g) of the paper to be cut to select the corresponding blade Not completely cut during knurling 1. Adjust the cutting pressure appropriately according to the thickness of the cutting material;2. Check whether the backplane is in good condition; if the backplane is damaged, it will affect the use; replace the backplane in time;3. Reduce the speed of the rocker arm; shake the rocker arm at a constant speed;4. Check whether the blade is not sharp; if the blade is damaged, please replace the blade in time. Abnormal noise during knurling 1. Check the combined thickness of the back plate & the knife plate;2. Light shaker; check whether the internal parts fall off & contact after-sales Note that when the total thickness of the bedknife module is too thick to pass the knurling machine; do not force the operation; so as not to damage the knurling machine; the parts that have passed need to shake the rocker arm in the opposite direction to exit the knurling machine. Please note:1. Due to different monitor, the picture color maybe have a little different from real color.2. Please allow 1-3cm measurement deviation due to manual measure.